aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2009-06-16V4L/DVB (11556): Siano: core header - indentationUri Shkolnik
Some more indentation for the smscoreapi.h There are no implementation changes in this patch. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11555): Siano: core - move and update the main core structure ↵Uri Shkolnik
declaration smscoreapi - move the main core structure declaration to the header, in order to enable other components (such as IR) to use it. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11554): Siano: core header - add definitions and structuresUri Shkolnik
Add new definitions (of Siano's protocol messages), and protocol structures (for future commits usage) Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11552): Siano: SDIO interface driver - remove two redundant linesUri Shkolnik
Remove two redundant lines, based on Klimov Alexey code review. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11240): siano: add high level SDIO interface driver for SMS based cardsUri Shkolnik
This patch provides SDIO interface driver for SMS (Siano Mobile Silicon) based devices. The patch includes SMS high level SDIO driver and requires patching the kernel SDIO stack, those stack patches had been provided previously. I would like to thank Pierre Ossman, MMC maintainer, who wrote this driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11877): lgdt3305: fix 64bit division in function lgdt3305_set_ifMichael Krufky
Signed-off-by: Michael Krufky <kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11875): dvb_frontend: fix case where fepriv->exit not resetDevin Heitmueller
The fact that we now explicitly set fepriv->exit = 1 when the thread is shutting down exposed an edge case where it was not being reset back to zero once the thread went away in some cases. This resulted in failures in cases where the frontend was closed, and then opened O_RDONLY, since in that case the thread is not being restarted but it was checking the fepriv->exit flag. Thanks to Thierry Lelegard, who and encountered and debugged a large portion of the issue in the same twelve hours that I did (as well as testing my patch). Cc: Thierry Lelegard <thierry.lelegard@tv-numeric.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11812): Siano: smsusb - add big endian supportUri Shkolnik
Add support for big endien target hosts, which use USB interface. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11785): dvb_frontend: fix race condition resulting in dropped ↵Devin Heitmueller
tuning commands A race condition was detected in the case that putting the tuner to sleep takes an unusually long period of time, combined with applications that quickly close/open the dvb frontend. The kaffeine channel scanner closes and reopens the dvb frontend between each tuning attempt. If it takes an unusually longer period of time to put the tuner to sleep (for example, the Pinnacle 801e takes 660 ms), the dvb_frontend thread will still be in a running state (and hence fepriv->thread is still set) but the fepriv->exit field will still be zero. As a result, if a dvb_frontend_start() call arrives while the frontend thread is in the process of terminating, the call will return 0 without actually starting a new thread. This results in the tuning request being dropped. To address this, mark fepriv->exit as soon as we know the thread is going to be terminated, so that dvb_frontend_start() knows to start a new instance. Problem encountered with Kaffeine 0.8.7 doing ATSC scanning against the Pinnacle 801e tuner, in conjunction with new code to power down the xc5000 when not in use. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (12001): lgs8gxx: update signal strength scaleDavid Wong
lgs8gxx: update signal strength scale Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (12000): lgs8gxx: lgs8913 fake signal strength option default onDavid Wong
lgs8gxx: lgs8913 fake signal strength option default on. Original calculation is too slow. Signed-off-by: David T.L. Wong <davidtlwong <at> gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11999): af9015: fix stack corruption bugJan Nikitenko
This patch fixes stack corruption bug present in af9015_eeprom_dump(): the buffer buf is one byte smaller than required - there is 4 chars for address prefix, 16*3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 are provided. The one byte missing in stack based buffer buf causes following oops on MIPS little endian platform, because i2c_adap pointer in af9015_af9013_frontend_attach() is corrupted by inlined function af9015_eeprom_dump(): CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 803a4488, ra == c049a1c8 Oops[#1]: Cpu 0 $ 0 : 00000000 10003c00 00000000 803a4468 $ 4 : 8f17c600 8f067b30 00000002 00000038 $ 8 : 00000001 8faf3e98 11da000d 09010002 $12 : 00000000 00000000 00000000 0000000a $16 : 8f17c600 8f067b68 8faf3c00 8f067c04 $20 : 8f067b9c 00000100 8f067bf0 80104100 $24 : 00000000 2aba9fb0 $28 : 8f066000 8f067af0 802cbc48 c049a1c8 Hi : 00000000 Lo : 00000000 epc : 803a4488 i2c_transfer+0x20/0x104 Not tainted ra : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013] Status: 10003c03 KERNEL EXL IE Cause : 00808008 BadVA : 00000000 PrId : 03030200 (Au1550) Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class i2c_au1550 au1550_spi Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470) Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00 8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7 00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004 00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600 c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00 ... Call Trace: [<803a4488>] i2c_transfer+0x20/0x104 [<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013] [<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013] [<c049c924>] af9013_attach+0x98/0x65c [af9013] [<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015] [<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb] [<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb] [<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015] [<80381024>] usb_probe_interface+0xbc/0x218 [<803227fc>] driver_probe_device+0x12c/0x30c [<80322a80>] __driver_attach+0xa4/0xac [<80321ed0>] bus_for_each_dev+0x60/0xd0 [<8032162c>] bus_add_driver+0x1e8/0x2a8 [<80322cdc>] driver_register+0x7c/0x17c [<80380d30>] usb_register_driver+0xa0/0x12c [<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015] [<8010d2a4>] __kprobes_text_end+0x3c/0x1f4 [<80167150>] sys_init_module+0xb8/0x1cc [<80102370>] stack_done+0x20/0x3c Code: afb10018 7000003f 00808021 <8c430000> 7000003f 1060002d 00c09021 8f830014 3c02efff Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11992): Add missing __devexit_p()Jean Delvare
Add missing __devexit_p() to several drivers. Also add a few missing __init, __devinit and __exit markers. These errors could result in build failures depending on the kernel configuration. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11987): au8522: add support for QAM-64 modulation typeFrank Dischner
Add support for QAM64 modulation type to the au8522 demod driver. Signed-off-by: Frank Dischner <phaedrus961@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11986): Kconfig: DVBWorld DVB-C USB Cable card needs tda1002x frontendMauro Carvalho Chehab
Auto-selects tda1002x if !DVB_FE_CUSTOMISE Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11984): Add support for yet another SDMC DM1105 based DVB-S card.Igor M. Liplianin
Add support for SDMC DM1105 based DVB-S cards with PCI ID 195d:1105 Also create separate workqueue for demuxing. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11983): Add support for DVBWorld DVB-C USB Cable card.Igor M. Liplianin
DVBWorld DVB-C USB Cable card contains TUA6034 tuner, TDA10023 demod and Cypress FX-2 controller. http://www.worlddvb.com/product/htm/usbc.htm Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11982): Add keymaps for TeVii and TBS USB DVB-S/S2 cardsIgor M. Liplianin
Add keymaps for TeVii and TBS USB DVB-S/S2 cards Also module parameter named keymap inserted for override default keymap. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11981): Remote control debugging for dw2102 driver based USB cardsIgor M. Liplianin
Remote control debugging for dw2102 driver based USB cards It includes DVBWorld, TeVii, Terratec and others. Type 'modprobe dvb-usb-dw2102 debug=4', then look at dmesg output. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11964): b2c2: Fix problems with frontend attachmentTrent Piepho
The frontend attachment code didn't handle cases where the frontend partially failed to attach. For instance, when the demod was attached successfully but the tuner driver wasn't compiled or fails to init for some reason. In these cases we try to clean up the partial attachment and fail instead of proceeding with a broken frontend. If frontend registration fails, clean up with dvb_frontend_detach() rather than just calling the frontend's main release method. The former does some additional stuff, like release an attached tuner and take care of putting symbols when dynamic binding is used. In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that gets set before skystar2_rev23_attach() is called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11931): lnbp21: Add missing newlineAndy Walls
Reported-by: VDR User <user.vdr@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11930): TS continuity check: show error message when discontinuity ↵Abylay Ospan
detected or TEI flag detected in header Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11915): af9015: support for Genius TVGo DVB-T03Antti Palosaari
Add USB ID (0458:4012) for Genius TVGo DVB-T03. Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing. Tested-by: Petr Vodicka <vodicka.petr@email.cz> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11857): TDA10048: Missing two I/F's / Pll combinations from the PLL ↵Steven Toth
table This was causing a lock failure in Australia. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11854): TDA10048: Ensure the I/F changes during DVB-T 6/7/8 ↵Steven Toth
bandwidth changes. TDA10048: Ensure the I/F changes during DVB-T 6/7/8 bandwidth changes. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11841): core: fix potential mutex_unlock without mutex_lock in ↵Simon Arlott
dvb_dvr_read dvb_dvr_read may unlock the dmxdev mutex and return -ENODEV, except this function is a file op and will never be called with the mutex held. There's existing mutex_lock and mutex_unlock around the actual read but it's commented out. These should probably be uncommented but the read blocks and this could block another non-blocking reader on the mutex instead. This change comments out the extra mutex_unlock. [akpm@linux-foundation.org: cleanups, simplification] Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11833): dvb-usb: Remove support for Genpix-CW3K (damages hardware)Alan Nisota
I have been informed by the manufacturer that the patch currently in the v4l tree to support the Genpix-CW3K version of the hardware will actually damage the firmware on recent units. As he seems to not want this hardware supported in Linux, and I do not know how to detect the difference between affected and not-affected units, I am requesting the immediate removal of support for this device. This patch removes a portion of the changeset dce7e08ed2b1 applied 2007-08-18 relating to this specific device. Adapted patch to not remove code, but to only to comment it out. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11832): dibusb_mc: fix i2c to not corrupt eeprom in case of strange ↵matthieu castet
read pattern dibusb_i2c_xfer seems to do things very dangerous : it assumes that it get only write/read request or write request. That means that read can be understood as write. For example a program doing file = open("/dev/i2c-x", O_RDWR); ioctl(file, I2C_SLAVE, 0x50) read(file, data, 10) will corrupt the eeprom as it will be understood as a write. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11831): dib0700: added USB IDs for Terratec T3 and T5Patrick Boettcher
This patch adds the USB IDs for the Terratec devices T3 and T5. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11830): dib0700: add support for Leadtek WinFast DTV Dongle Htomas petr
"Leadtek WinFast DTV Dongle H" is a hybrid digital/analog USB-stick TV receiver. The code below allows the digital part to work with dvb_usb in linux. Signed-off-by: tomas petr <tom-petr@seznam.cz> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11829): Rewrote frontend-attach mechanism to gain noise-less ↵Patrick Boettcher
deactivation of submodules This patch is reorganizing the frontend-attach mechanism in order to gain noise-less (superflous prints) deactivation of submodules. Credits go to Uwe Bugla for helping to clean and test the code. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11828): Reducing print-level of I2C error printsMatthias Schwarzott
Reducing the print-levle of I2C error prints cleans some unwanted but unavoidable errors from default syslog-level. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11801): dib0700: reduce xc5000 sleep time for Pinnacle 801e to 10msDevin Heitmueller
According to the xc5000 spec, the reset pin only needs to be held low for 10ms. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11763): dvb-ttpci: Some whitespace adjustmentsOliver Endriss
Some whitespace adjustments. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11762): dvb-ttpci: Fixed return code of av7110_av_start_playOliver Endriss
av7110_av_start_play() should return 0 on success. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11761): dvb-ttpci: Fixed VIDEO_SLOWMOTION ioctlOliver Endriss
Fixed VIDEO_SLOWMOTION ioctl. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11760): dvb-ttpci: Check transport error indicator flagOliver Endriss
Discard PES packet if transport error indicator flag is set. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11759): dvb-ttpci: Add TS replay capabilityOliver Endriss
Implemented TS replay capability. audio/video devices are able to process PES and TS data now. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11700): tda10048: Added option to block i2c gate control from other ↵Steven Toth
drivers. Currently, DVB-T is broken and this fixes it. The PVRUSB2 has an odd I2C bus configuration where opening the i2c gate on the digital and analog demod causes the tuner to fail. This needs to be protected against for the PVRUSB2. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB: cleanup redundant tests on unsignedRoel Kluin
Remove redundant tests on unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11739): remove driver_data direct access of struct deviceGreg Kroah-Hartman
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11730): af9015: support for KWorld MC810Wen-chien Jesse Sung
Add USB ID (1b80:c810) for Kworld MC810. Signed-off-by: Wen-chien Jesse Sung <jesse@cola.voip.idv.tw> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11724): firedtv: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11723): Link firmware to physical deviceJean Delvare
Use the physical device rather than the i2c adapter as the reference device when loading firmwares. This will prevent the sysfs name collision with i2c-dev that has been reported many times. I may have missed other drivers which need the same fix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11697): tda10048: Add ability to select I/F at attach time.Steven Toth
tda10048: Add ability to select I/F at attach time. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11682): STV0900/STV0903: Add support for Silicon cut >= 3Manu Abraham
1. Support Silicon Cut >= 3.0 2. Remove support for obsolete cuts: 1.0. 1.1. 1.2 3. Try to catch more error cases Driver doesn't now attach to obsolete silcon cuts, It just simply quits. Results in code simplification, with removal of the obsolete cuts. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11601): stv090x: update demodulator capabilitiesAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11600): budget: Use Continuous clockAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11599): S2-1600: Use budget driver instead of budged-ciAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11598): stv090x: fix missing wakeup in initAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-12 16:29:28 +0000