aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (7077): bt878: remove handcrafted PCI subsystem ID checkAkinobu Mita
This patch moves the subsystem ID and subsystem vendor ID check from probing function to the PCI generic function by describing subsystem IDs in pci_device_id table. This enables to add new PCI IDs to a device driver pci_ids table at runtime by new_id file in sysfs pci driver tree. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7075): Make a local function staticPatrick Boettcher
Make a local function static Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7074): DiB7000P: correct tuning problem for 7MHz channelPatrick Boettcher
Tuning problem for 7Mhz channels fixes Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7073): DiB7070: Reception quality improvedPatrick Boettcher
Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7072): sets the MT2060 IF1 frequency according to EEPROMOlivier DANET
Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users. It sets the MT2060 IF1 frequency according to the calibration values stored in the EEPROM. It is supposed to enhance the signal quality, but, hey, there is no guarantee. Feedbacks would be much appreciated, to know whether it deserves being applied. Signed-off-by: Olivier DANET <odanet at caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7071): DiB0700: Start streaming the right wayPatrick Boettcher
There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7070): Fix some tuning problemsSoeren Moch
The attached patch solves all my vdr tuning problems on a dib7000p nova-t stick as far as I could check within the last weekend. It disables streaming while tuning, like that the number of faulty TS packets is reduced. Signed-off-by: Soeren Moch <Soeren.Moch@stud.uni-hannover.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7069): Support for myTV.tDarren Salt
Here's a roll-up which provides support for both this and the myTV.t. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7068): Add support for WinTV Nova-T-CE driverTim Taubert
Add support for WinTV Nova-T-CE driver Signed-off-by: Tim Taubert <ttmails@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7067): fix autoserach in the Hauppauge NOVA-T 500Jose Alberto Reguero
This patch fix autoserach in the Hauppauge NOVA-T 500. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7066): ASUS My Cinema U3000 Mini DVBT TunerDaniel Gimpelevich
Adding support for ASUS My Cinema U3000 Mini DVBT Tuner Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7065): Artec T14BR patchesYousef Lamlum
Added Artec T14BR support Signed-off-by: Yousef Lamlum <yousef@youseflamlum.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7063): xc5000: Fix OOPS caused by missing firmwareSteven Toth
xc5000: Fix OOPS caused by missing firmware. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Acked-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7054): ansonic branded dvb-t usb stick support in the af9005 driverLuca Olivetti
Marcos Melero (marcosmelero at gmail.com) reported he could make his dvb-t usb stick work with the af9005 driver by changing the device ids (10b9:6000). The stick is branded "Ansonic" (one of the brands of a spanish chain of supermarkets) with no other identification of the model. Since neither Marcos nor me know the OEM for the stick, in the attached patch I used Ansonic for the ids/description. Signed-off-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7052): tda18271: when tuning digital, the analog demod must be ↵Michael Krufky
tri-stated Call analog_ops.standby during tda18271_set_params, to put the tda8295 in tri-state when tuning digital channels. Otherwise the tda8295 will interfere with the signal coming from the tda18271 into the digital demodulator. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7051): Cleans up error handling on or51xxx_attachMauro Carvalho Chehab
state is already NULL. Reviewed-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7046): Finalise support for the Pinnacle HD 8000iSteven Toth
Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7045): xc5000: Small amount of cleanup and commentingSteven Toth
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7042): xc5000: Tuner analog supportSteven Toth
From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7041): s5h1409: Bug fix for parallel supportSteven Toth
Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7032): tda18271: tda18271_cal_on_startup should be declared staticMichael Krufky
This module option variable is only handled within the file tda18271-fe.c - Declare this variable as static. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7029): tda18271: provide a choice whether to perform rf cal on init ↵Michael Krufky
or on first tune If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7028): tda18271: test RF_CAL_OK to see if we need additional RF ↵Michael Krufky
calibration Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7027): tda18271: put the device in standby mode during sleep()Michael Krufky
Add function, tda18271_set_standby_mode. During sleep, enter standby mode with slave tuner output enabled, loop through on and xtal oscillator on. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7026): tda18271: report when the RF tracking filter calibration has ↵Michael Krufky
completed Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7008): s5h1409: Ensure the silicon is initialized during attachSteven Toth
If not it impacts on analog tuner quality. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6988): tda18271: give calibration debug a separate debug maskMichael Krufky
We don't usually want to see the calibration debug messages, but sometimes it is useful. Assign it to a separate debug mask. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6987): tda18271: add support for fm radioMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6986): tda18271: share state between analog and digital tuner instancesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6979): tda18271: use a mutex to protect state in critical sectionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6978): tda18271: store frequency and bandwidth after successful tuneMichael Krufky
Store last tuned frequency & bandwidth after successful tune. Clean up tune functions -- remove pointer to tune function in state structure, instead call tune function based on priv->id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6977): tda18271: clean up calibration initialization proceduresMichael Krufky
Always initialize registers during attach. Perform IR Calibration during init if needed. Perform RF Calibration during init if needed for C2, only. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6965): tda18271: fix analog tuning regression caused by earlier ↵Michael Krufky
changeset An earlier patch, "tda18271: fail table lookups if frequency is out of range" broke analog support on certain hardware. This patch fixes that problem, by allowing the RF_CAL byte to be set to the maximum value, in cases of the frequency being out of range. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6964): tda18271: document debug level and configuration parametersMichael Krufky
Document debug level module options and tda18271_config attach-time parameters. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6963): tda18271: store IF frequency in a u16 instead of u32Michael Krufky
Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6962): tda18271: allow device-specific configuration of IF ↵Michael Krufky
frequency and std bits Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6961): tda18271: move common code to tda18271-common.cMichael Krufky
Move some common code to a new file to make this easier to look at. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6960): tda18271: add support for NXP TDA18271HD/C2Michael Krufky
Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6959): tda18271: add MODULE_VERSIONMichael Krufky
version 0.1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6958): tda18271: clean up function tda18271_set_analog_paramsMichael Krufky
make set_analog_params function look consistent with set_params function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6957): tda18271: fail table lookups if frequency is out of rangeMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6930): xc5000: Removed erroneous definesSteven Toth
Basic cleanup. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6928): tda18271: break calculation functions out of tda18271_tuneMichael Krufky
Break out the following new functions from tda18271_tune: tda18271_calc_bp_filter tda18271_calc_km tda18271_calc_rf_band tda18271_calc_gain_taper tda18271_calc_ir_measure tda18271_calc_rf_cal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6927): tda18271: improve printk macrosMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6926): tda18271: consolidate table lookup functionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6925): tda18271: move state structures to tda18271-priv.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6924): tda18271: fix whitespace in tda18271_ir_measureMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6923): tda18271: remove extraneous debugMichael Krufky
We don't need to do a dbg_info during tda18271_attach anymore, since the tda18271_get_id function will call dbg_info with the same information and more. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6907): tda18271: create separate calc_pll functionsMichael Krufky
Consolidate duplicated code by creating functions: tda18271_calc_main_pll tda18271_calc_cal_pll Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6906): tda18271: rename tda18271_calc_* functions to tda18271_lookup_*Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 17:14:29 +0000