aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2008-11-24V4L/DVB (9732): sms1xxx: use new firmware for Hauppauge WinTV MiniStickMichael Krufky
New firmware image brings enhanced tuning performance. Firmware is available for download at the following location: http://www.steventoth.net/linux/sms1xxx Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-20V4L/DVB (9664): af9015: don't reconnect device in USB-busJose Alberto Reguero
Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9639): Make dib0700 remote control support work with firmware v1.20Devin Heitmueller
The format for reading the IR controller changed in firmware 1.20. It now provides the events on bulk endpoint 1 instead of using a control request. Support the new format, providing backward compatibility for users who might be using older firmware. Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing the required information on how the version 1.20 firmware works. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9634): Make sure the i2c gate is open before powering down tunerDevin Heitmueller
It is not safe to assume that the i2c gate will be open before issuing the command to power down the tuner. In fact, many demods only open the gate long enough to issue the tuning command. This fix allows power management to work properly for those tuners behind an i2c gate (in my case the problem was with the HVR-950Q) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9631): Make s2api work for ATSC supportDevin Heitmueller
ATSC should be considered a legacy delivery system, or else fields such as p->u.vsb.modulation do not get populated (resulting in set_frontend failures) Cc: Steven Toth <stoth@linuxtv.org> Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9608): Fix section mismatch warning for dm1105 during makeIgor M. Liplianin
-- Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9605): usb-urb: fix memory leakDouglas Schilling Landgraf
Free allocated memory Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9604): ttusb_dec: fix memory leakDouglas Schilling Landgraf
Free allocated memory Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9603): dvb-ttusb-budget: Add validation for ttusb_alloc_iso_urbsDouglas Schilling Landgraf
Added validation for ttusb_alloc_iso_urbs Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9602): dvb-ttusb-budget: Add NULL pointer validationDouglas Schilling Landgraf
Added validation for NULL pointer Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16V4L/DVB (9601): ttusb_dec: Add NULL pointer validationDouglas Schilling Landgraf
Added validation for NULL pointer Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9527): af9015: fix compile warningsAntti Palosaari
- use static to avoid compile warnings Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9524): af9013: fix bug in status readingroel kluin
- ! has a higher precedence than & Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9494): anysee: initialize anysee_usb_mutex staticallyAkinobu Mita
anysee_usb_mutex is initialized at every time the anysee device is probed. If the second anysee device is probed while anysee_usb_mutex is locked by the first anysee device, the mutex is broken. This patch fixes by initialize anysee_usb_mutex statically rather than initialize at probe time. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9492): unplug oops from dvb_frontend_init...Daniel J Blueman
When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with 2.6.24, I was met with an oops [1]. The problem is relevant to 2.6.25/26-rc also. dvb_frontend_init() was called either from re-creation of the kdvb-fe0 thread - seems unlikely, or someone called dvb_frontend_reinitialise(), causing this path in the thread - really unlikely, as I can't find any call-site for it. Either way, quite a number of drivers call dvb_usb_generic_rw() [2] without checking the validity of the relevant member in the dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw() sanity-check and fail (rather than loading from 0x120) seems reasonable defensive programming [3], in light of it being called in this way. The problem with this, is that drivers don't check the return code of the init call [4]. Does it make sense to cook a patch which allows the failure to be propagated back up, or am I missing something else? Thanks, Daniel <whoops, hot unplug> [83711.538485] dvb-usb: bulk message failed: -71 (1/0) [83711.538875] dvb-usb: bulk message failed: -71 (1/0) [83711.538899] usb 7-5: USB disconnect, address 3 [83711.538905] dvb-usb: bulk message failed: -22 (1/0) [83711.538924] dvb-usb: bulk message failed: -22 (1/0) [83711.538943] dvb-usb: bulk message failed: -22 (1/0) [83711.588979] dvb-usb: bulk message failed: -22 (1/0) [83711.589031] dvb-usb: bulk message failed: -22 (1/0) [83711.589078] dvb-usb: bulk message failed: -22 (1/0) [83711.589122] dvb-usb: bulk message failed: -22 (1/0) [83711.589167] dvb-usb: bulk message failed: -22 (1/0) [83711.639233] dvb-usb: bulk message failed: -22 (1/0) [83711.639282] dvb-usb: bulk message failed: -22 (1/0) [83711.639330] dvb-usb: bulk message failed: -22 (1/0) [83711.639374] dvb-usb: bulk message failed: -22 (1/0) [83711.639421] dvb-usb: bulk message failed: -22 (1/0) [83711.658391] dvb-usb: bulk message failed: -22 (1/0) [83768.174281] dvb-usb: bulk message failed: -22 (2/-32512) [83768.174350] Unable to handle kernel NULL pointer dereference<6>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully deinitialized and disconnected. [83768.174459] at 0000000000000120 RIP: [83768.174459] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.174580] PGD 0 [83768.174643] Oops: 0000 [1] SMP [83768.174723] CPU 0 [83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6 button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore e1000 thermal processor fan fbcon tileblit font bitblit softcursor fuse [83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1 [83768.177009] RIP: 0010:[<ffffffff88339b4f>] [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286 [83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000 [83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000 [83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400 [83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000 [83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000) knlGS:0000000000000000 [83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0 [83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo ffff810021938000, task ffff81003bd1b7a0) [83768.177629] Stack: ffff81003e9b6828 0000000000000000 ffff8100378369f8 0000000000000000 [83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30 ffff81003c10b400 [83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0 ffffffff88342452 [83768.178054] Call Trace: [83768.178130] [<ffffffff88342452>] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30 [83768.178178] [<ffffffff88339f6a>] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50 [83768.178229] [<ffffffff88325c41>] :dvb_core:dvb_frontend_init+0x21/0x70 [83768.178278] [<ffffffff8832746b>] :dvb_core:dvb_frontend_thread+0x8b/0x370 [83768.178329] [<ffffffff883273e0>] :dvb_core:dvb_frontend_thread+0x0/0x370 [83768.178382] [<ffffffff80253e3b>] kthread+0x4b/0x80 [83768.178427] [<ffffffff8020d198>] child_rip+0xa/0x12 [83768.178473] [<ffffffff80253df0>] kthread+0x0/0x80 [83768.178514] [<ffffffff8020d18e>] child_rip+0x0/0x12 [83768.178557] [83768.178594] [83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0 0f 84 ad 00 [83768.179167] RIP [<ffffffff88339b4f>] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.179234] RSP <ffff810021939df0> [83768.179271] CR2: 0000000000000120 [83768.179419] ---[ end trace dba8483163cb1700 ]--- Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9358): CinergyT2: fix Kconfig typoThierry MERLE
config\tDVB_USB_CINERGY_T2 causes the make_kconfig.pl to forget to enable by default the compilation of cinergyT2 module. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9348): dtv5100: add dependency on zl10353Antoine Jacquet
Update Kconfig to add missing dependency on zl10353 for dtv5100 driver. Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9346): Optimization: Enable gate in a symmetric/disciplined way,Manu Abraham
rather than implementing different ways leading to confusion. This allows multiple gate_enable/disable's in the tuner_read/write functions, thereby lesser number of I/O operations throughout, eventually leading to better results. As a side effect demods that detect the STOP bit for auto closing of the gate can be avoided, thereby a very minimal gain in disabling the auto detect feature as well. Improves readability on the device control. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9316): s5h1411: Power down s5h1411 when not in useDevin Heitmueller
Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this brings idle power from 123ma down to 84ma). Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9315): s5h1411: Skip reconfiguring demod modulation if already at ↵Devin Heitmueller
the desired modulation If we are already at the desired modulation, there is no need to reconfigure the demod (at a tuning time cost) Note that this change revealed that although the datasheet says the demod starts out in VSB-8 mode, the first tuning was failing consistently unless we went through the work of setting the registers. So add a field to denote this case so we always do the enable_frontend call, even if the first tuning request is for VSB-8. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9314): s5h1411: Perform s5h1411 soft reset after tuningDevin Heitmueller
If you instruct the tuner to change frequencies, it can take up to 2500ms to get a demod lock. By performing a soft reset after the tuning call (which is consistent with how the Pinnacle 801e Windows driver behaves), you get a demod lock inside of 300ms Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9313): s5h1411: Add the #define for an existing supporting I/FSteven Toth
s5h1411: Add the #define for an existing supporting I/F Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9312): s5h1411: Remove meaningless codeSteven Toth
s5h1411: Remove meaningless code Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9311): s5h1411: bugfix: Setting serial or parallel mode could ↵Steven Toth
destroy bits Adding a serialmode function to read/and/or/write the register for safety. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9310): s5h1411: read_status() locking detection fixes.Steven Toth
This includes new bit definitions for previously unknown bits. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9309): s5h1411: I/F related bugfix for 3.25 and remove spurious defineSteven Toth
This should improve performance. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9308): s5h1411: Improvements to the default registersSteven Toth
s5h1411: Improvements to the default registers Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-20byteorder: remove direct includes of linux/byteorder/swab[b].hHarvey Harrison
A consolidated implementation will provide this generically through asm/byteorder, remove direct includes to avoid breakage when the changeover to the new implementation occurs. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-17V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilationIgor M. Liplianin
Remove warning message during cx88-dvb compilation. Also fixes double underline in function and struct names. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be constGeert Uytterhoeven
| drivers/media/dvb/frontends/cx24116.c:573: warning: passing argument 3 of 'cx24116_writeregN' discards qualifiers from pointer target type Make the `data' input pointer parameter of cx24116_writeregN() const to kill the warning. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9274): Remove spurious messages and turn into debug.Steven Toth
Remove spurious messages and turn into debug. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9270): cx24116: optimise emulated auto-pilotChristophe Thommeret
Christophe divulged the following: "Since 8PSK (and higher mod) signals are very likely to have pilot symbols, pilot_auto should start with pilot_on for 8PSK. And since QPSK signals are unlikely to have pilot, pilot_auto should start with pilot_off for QPSK. Without the patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~900ms with patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~100ms " This patch does as Cristophe asks. In emulated auto-pilot we choose pilot-on for tuning PSK_8 and pilot-off for tuning QPSK. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9264): MFE: bugfix: multi-frontend mutual exclusion parallel openDarron Broad
When moving from one frontend to another an application could spawn multiple threads opening the same new frontend and in some circumstances all of these could become delayed waiting for the previous frontend readers or previous frontend writer thread to complete. In this scenario the first thread will succeed on open to bring the new frontend online but any others will return EBUSY. This is a fault. If the first succeeds and all others are on the same frontend then they should succeed also. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9260): cx24123: Checkpatch complianceSteven Toth
cx24123: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9259): s5h1411: Checkpatch complianceSteven Toth
s5h1411: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9258): s5h1409: Checkpatch complianceSteven Toth
s5h1409: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9257): cx24116: Checkpatch compliance #3Steven Toth
cx24116: Checkpatch compliance #3 Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9256): cx22702: Checkpatch complianceSteven Toth
cx22702: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9255): tda10048: Checkpatch complianceSteven Toth
tda10048: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9254): cx24116: Checkpatch compliance #2Steven Toth
cx24116: Checkpatch compliance #2 Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9253): cx24116: Checkpatch complianceSteven Toth
cx24116: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9248): sms1xxx: support two new revisions of the Hauppauge WinTV ↵Michael Krufky
MiniStick Autodetect 2040:5520 and 2040:5530 as Hauppauge WinTV MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9227): MFE: Add multi-frontend mutual exclusionDarron Broad
This add frontend R/W mutual exclusion. Prior to this point in time it was possible to open both frontends simultaneously which an MFE card cannot support. In order to stop this, a delayed open is performed which has the following function: - Return EBUSY after a configurable amount of time if a frontend is unavailable due to the other being in use. - Only allow opening of a frontend if the kernel thread of the other has stopped. This solution was chosen to allow switching between frontends to work as seamlessly as possible. When both frontends are actually opened simultaneously then one will only open, but if quick switching is performed between one of many then the new open will succeed in a clean fashion rather than interrupting a kernel thread. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9222): S2API: Add Multiple-frontend on a single adapter support.Steven Toth
A detailed description from the original patches 2 years ago: "The WinTV-HVR3000 has a single transport bus which is shared between a DVB-T and DVB-S modulator. These patches build on the bus acquisition cx88 work from a few weeks ago to add support for this. So to applications the HVR3000 looks like this: /dev/dvb/adapter0/fe0 (cx24123 DVB-S demod) /dev/dvb/adapter0/fe1 (cx22702 DVB-T demod) Additional boards continue as before, eg: /dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod) The basic change is removing the single instance of the videobuf_dvb in cx8802_dev and saa7134_dev(?) and replacing it with a list and some supporting functions. *NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so two or three current cx88 patches appear to be reversed by this tree, this will be cleaned up in the near future. The patches missing change the mutex handing to core->lock, fix an enumeration problem." It should be recognised that a number of people have been maintaining this patchset. Significant levels of Kudos to everyone one involved, including but not limited to: Darron Broad Fabio M. Di Nitto Carlo Scarfoglio Hans Werner Without the work of these people, and countless others, my two year old patches would of died on the Mercurial linuxtv.org vine a long time ago. TODO: Revise these patches a little further so that the need for demux1 and dvr0 is optional, not mandatory on the HVR3000. HISTORY (darron): This is the last update to MFE prepared by Hans which is based upon the `scratchpad' diff created by Carlo. All MFE work prior to that point must be attributed to Fabio who ported and maintained Steve's original patch up to that time. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9195): Frontend API Fix: 32APSK is a valid modulation for the ↵Manu Abraham
DVB-S2 delivery Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-16device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by ↵Steven Toth
default. cx24116: Change the default SNR units back to percentage by default. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.Steven Toth
S2API: Return error of the caller provides 0 commands. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9182): S2API: Added support for DTV_HIERARCHYSteven Toth
A user tuning DVB-T via the S2API reports that this was not implemented, and his tuning was failing. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and ↵Steven Toth
DTV_TRANSMISSION_MODE Tuning DVB-T via the S2API was failing, missing some essential items. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 22:56:54 +0000