aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2010-02-26V4L/DVB: dib0090: cleanup dib0090_dcc_freq()Márton Németh
'extern' is not needed at function definition. This will remove the following sparse warning (see "make C=1"): * function 'dib0090_dcc_freq' with external linkage has definition Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: stv0900: make more local functions staticMárton Németh
Some functions are only used locally so mark them static. This will remove the following sparse warnings (see "make C=1"): * symbol 'extract_mask_pos' was not declared. Should it be static? * symbol 'stv0900_initialize' was not declared. Should it be static? * symbol 'stv0900_get_mclk_freq' was not declared. Should it be static? * symbol 'stv0900_set_mclk' was not declared. Should it be static? * symbol 'stv0900_get_err_count' was not declared. Should it be static? Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: stv0900: make local functions staticMárton Németh
The functions stv0900_sw_algo() and stv0900_set_dvbs1_track_car_loop() are only used locally so mark them static. This will remove the following sparse warnings (see "make C=1"): * symbol 'stv0900_sw_algo' was not declared. Should it be static? * symbol 'stv0900_set_dvbs1_track_car_loop' was not declared. Should it be static? Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: dvb-core: remove unnecessary casting of kmallocThiago Farina
drivers/media/dvb/dvb-core/dvb_frontend.c | 6 ++---- Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: dm1105: use macro for read/write registersIgor M. Liplianin
This is for better readability and smaller size of code lines. Also it is for future improvements like GPIO handling. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvbIgor M. Liplianin
This is for better readability and smaller size of code. Also it is similar to other drivers. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: dm1105: connect splitted else-if statementsIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: Add Support for DVBWorld DVB-S2 PCI 2004D cardIgor M. Liplianin
The PCI card contains dm1105 PCI bridge and ds3000 demod. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: 22-kHz set_tone fix for NetUP Dual DVB-S2-CI card. 22kHz logic ↵Abylay Ospan
controlled by demod 22-kHz tone can be driven in two ways: 1. LNBH24 can produce 22kHz continuous tone when TEN=1 ( 22 KHz tone output is always activated ). 2. LNBH24 can reproduce 22kHz tone timings from DSQIN or EXTM pin's when TEN=0. From LNBH24 datasheet: "In order to improve design flexibility an external tone input pin is available (EXTM). The EXTM is a Logic input pin which activates the 22 kHz tone output, on the VoTX pin, by using the LNBH24 integrated tone generator (similar to the DSQIN pin function). In fact, the output tone waveform characteristics will always be internally controlled by the LNBH24 tone generator and the EXTM signal will be used as a timing control for DiSEqC tone data encoding on the VoTX output." In NetUP Dual DVB-S2-CI card 22kHz tone timings on EXTM pin produced by STV0900 demod: .set_tone = stv0900_set_tone redefine to "set_tone = lnbp21_set_tone" is not correct for "NetUP Dual DVB-S2-CI card". Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13989): [TDA8261] Fix TDA8261 I2C read bugArvo Järve
The TDA8261 driver would crash when reading more than a byte as described. ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 8.430350] KNC1-2: MAC addr = 00:09:d6:65:2d:91 [ 8.610008] saa7146 (1) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 8.734457] stb0899_attach: Attaching STB0899 [ 8.768481] tda8261_attach: Attaching TDA8261 8PSK/QPSK tuner [ 8.768485] DVB: registering adapter 2 frontend 0 (STB0899 Multistandard)... Once I launch scan-s2: scan-s2 -vvvv -a 2 -s 1 -l UNIVERSAL /usr/share/dvb/dvb-s/Hotbird-13.0E I see the following via dmesg: [ 435.040017] saa7146 (1) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 435.778648] tda8261_get_bandwidth: Bandwidth=40000000 [ 435.781781] tda8261_get_bandwidth: Bandwidth=40000000 [ 435.783311] tda8261_set_state: Step size=1, Divider=1000, PG=0x793 (1939) [ 435.783512] tda8261_set_state: Waiting to Phase LOCK [ 435.810134] tda8261_get_status: Tuner Phase Locked [ 435.810137] tda8261_set_state: Tuner Phase locked: status=1 [ 435.810139] tda8261_set_frequency: Frequency=1939000 [ 435.810141] tda8261_get_frequency: Frequency=7574 [ 435.830008] tda8261_get_bandwidth: Bandwidth=40000000 [ 436.402814] tda8261_get_bandwidth: Bandwidth=40000000 [ 436.405946] tda8261_get_bandwidth: Bandwidth=40000000 [ 436.407458] general protection fault: 0000 [#1] SMP [ 436.407527] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor [ 436.407560] CPU 0 [ 436.407601] Modules linked in: tda8261 stb0899 dvb_pll mt352 lnbp21 budget_av saa7146_vv snd_hda_codec_realtek videodev stv0299 v4l1_compat coretemp snd_hda_intel v4l2_compat_ioctl32 i915 videobuf_dma_sg b2c2_flexcop_pci snd_hda_codec budget_ci videobuf_core b2c2_flexcop ir_common w83627ehf drm snd_hwdep cx24123 budget_core hwmon_vid snd_pcm cx24113 dvb_core iptable_filter snd_timer i2c_algo_bit ip_tables saa7146 s5h1420 snd ttpci_eeprom soundcore intel_agp video serio_raw pcspkr lp snd_page_alloc x_tables output parport pata_it8213 e1000e [ 436.408757] Pid: 1410, comm: kdvb-ad-2-fe-0 Not tainted 2.6.31-14-server #48-Ubuntu C2SBC-Q [ 436.408818] RIP: 0010:[<ffffffffa00241a1>] [<ffffffffa00241a1>] tda8261_set_state+0x51/0x250 [tda8261] [ 436.408903] RSP: 0018:ffff88013649bc70 EFLAGS: 00010283 [ 436.408945] RAX: 00000000000f1748 RBX: ffff880138870680 RCX: 0000000000000018 [ 436.408990] RDX: ffff88013649bcd0 RSI: 0000000000000001 RDI: ffff880135273010 [ 436.409035] RBP: ffff88013649bcc0 R08: 0000000000000001 R09: 0000000000000002 [ 436.409081] R10: ffff88013649bc40 R11: 0000000055555556 R12: 00000000001d9638 [ 436.409126] R13: 38ffffffa0261568 R14: 0000000000000000 R15: ffff880135273010 [ 436.409172] FS: 0000000000000000(0000) GS:ffff880028022000(0000) knlGS:0000000000000000 [ 436.409232] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 436.409274] CR2: 00007fff925e4cd8 CR3: 000000013642a000 CR4: 00000000000406f0 [ 436.409320] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 436.409365] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 436.409411] Process kdvb-ad-2-fe-0 (pid: 1410, threadinfo ffff88013649a000, task ffff88013658ad60) [ 436.409473] Stack: [ 436.409508] ffff880136ee2af1 00000000bcd5d166 ffff000200000068 0000000035273000 [ 436.409608] <0> 0000000000000001 ffff880135273000 ffffffffa0265260 00003473bc000000 [ 436.409758] <0> 0000000000000000 ffff88013a4e05e0 ffff88013649bd00 ffffffffa025f133 [ 436.409938] Call Trace: [ 436.409978] [<ffffffffa025f133>] tda8261_set_frequency+0x23/0x70 [budget_av] [ 436.410027] [<ffffffffa026ed09>] ? stb0899_i2c_gate_ctrl+0x49/0xf0 [stb0899] [ 436.410074] [<ffffffffa026e259>] ? stb0899_write_reg+0x19/0x20 [stb0899] [ 436.410121] [<ffffffffa02716e2>] stb0899_dvbs_algo+0x3a2/0x13c8 [stb0899] [ 436.410170] [<ffffffff813cdd0d>] ? i2c_transfer+0xbd/0x100 [ 436.410215] [<ffffffffa026e13c>] ? stb0899_write_regs+0xac/0x1b0 [stb0899] [ 436.410262] [<ffffffffa026f239>] stb0899_search+0x489/0x750 [stb0899] [ 436.410308] [<ffffffff8107d153>] ? down_interruptible+0x33/0x60 [ 436.410360] [<ffffffffa00c34ec>] dvb_frontend_thread+0x57c/0x720 [dvb_core] [ 436.410407] [<ffffffff81078620>] ? autoremove_wake_function+0x0/0x40 [ 436.410457] [<ffffffffa00c2f70>] ? dvb_frontend_thread+0x0/0x720 [dvb_core] [ 436.410504] [<ffffffff81078236>] kthread+0xa6/0xb0 [ 436.410547] [<ffffffff810130aa>] child_rip+0xa/0x20 [ 436.410589] [<ffffffff81078190>] ? kthread+0x0/0xb0 [ 436.410631] [<ffffffff810130a0>] ? child_rip+0x0/0x20 [ 436.410672] Code: 00 03 00 00 4c 8b 6b 10 c7 45 cc 00 00 00 00 0f 84 e8 01 00 00 44 8b 22 41 8d 84 24 10 81 f1 ff 3d 80 4f 12 00 0f 87 af 01 00 00 <41> 8b 75 04 31 d2 48 c7 c7 d8 46 02 a0 89 f0 8b 0c 85 f0 45 02 [ 436.411950] RIP [<ffffffffa00241a1>] tda8261_set_state+0x51/0x250 [tda8261] [ 436.412015] RSP <ffff88013649bc70> [ 436.412064] ---[ end trace c1d7ae4d9e05c51b ]--- Signed-off-by: Arvo Järve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13988): [STV090x] Configuration parameters adc1_range, adc2_range, ↵Oliver Endriss
tuner_bbgain Add parameters adc1_range, adc2_range and tuner_bbgain to the config struct. Defaults: adc1_range = adc2_range = 2Vpp, tuner_bbgain = 10db Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13987): [STV090x] Quit processing if the tuner did not lockOliver Endriss
Exit stv090x_algo() if the tuner did not lock. This might happen due to missing signal or invalid/incomplete tuning parameters. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13986): [STV090x] Disable I2C gate on errorOliver Endriss
The I2C gate must also be disabled, if a tuner command failed. Otherwise the tuner mutex would be locked forever. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13985): [STV090x] reset mclk and dev_ver of internal structure ↵Andreas Regel
after allocating When mclk is not 0 then it will never be set to the correct value and the Demodulator will not work. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13984): [BUDGET] Use a tuner clock output divider of 2 for TT S2-1600.Andreas Regel
This gives the STV090x and improved clock signal (rectangle instead of sine). Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13983): [STV6110x] add clk_div member to stv6110x_config structureAndreas Regel
Using clk_div member of stv6110x_config structure the tuner's clock output divider can be configured. It is set in stv6110x_attach. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13982): [STV090x] setup master clock in stv090x_init instead of ↵Andreas Regel
stv090x_setup. This is needed when clock input is driven from tuner and an output divider different from 1 is used. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13981): [STV6110x] Add a local register map for each instance of ↵Andreas Regel
the driver. Before there was used a static register map that could lead to issues when there are are multiple adapters with the STV6110(A). Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13980): [STV6110x] Added function stv6110x_write_regsAndreas Regel
The function stv6110x_write_regs is used to write several registers at once. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13979): [STV090x] Added possibility to set a fixed TS output clock.Andreas Regel
This could be useful for p.e. Common Interface applications where data rate is limited. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13978): [STV090x] set FE_HAS_SIGNAL flag in stv090x_read_status ↵Andreas Regel
when locked. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13977): [STV090x] Test for valid frequency before starting to tuneAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13976): [STV090x] Added mutex protection around tuner I2C access.Andreas Regel
With this change it is possible to have the same I2C address for both tuners. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13975): [STV090x] Added internal structure with shared settings and ↵Andreas Regel
data. As the STV0900 features two demodulation paths in one chip there is some information used by both instances of the driver when used in dual mode. This information is now shared in an internal structure referenced by I2C adapter and address. Do initialisation of the demodulator only once when used in dual mode. Moved global mutex demod_lock to internal structure. Moved dev_ver and mclk to internal structure. Removed unused tuner_refclk from stv090x_state. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13974): [STV090x] Fix locking reliabilty issues in automatic mode.Andreas Regel
In automatic S/S2 detection mode, locking of a DVB-S transponder could fail when coming from a DVB-S2 transponder. This change fixes the issue by first disabling DVB-S and DVB-S2 mode before enabling it again. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13936): 22-kHz set_tone fix for NetUP Dual DVB-S2-CI cardAbylay Ospan
22-kHz tone can be driven in two ways: 1. LNBH24 can produce 22kHz continuous tone when TEN=1 ( 22 KHz tone output is always activated ). 2. LNBH24 can reproduce 22kHz tone timings from DSQIN or EXTM pin's when TEN=0. From LNBH24 datasheet: "In order to improve design flexibility an external tone input pin is available (EXTM). The EXTM is a Logic input pin which activates the 22 kHz tone output, on the VoTX pin, by using the LNBH24 integrated tone generator (similar to the DSQIN pin function). In fact, the output tone waveform characteristics will always be internally controlled by the LNBH24 tone generator and the EXTM signal will be used as a timing control for DiSEqC tone data encoding on the VoTX output." In NetUP Dual DVB-S2-CI card 22kHz tone timings on EXTM pin produced by STV0900 demod: .set_tone = stv0900_set_tone redefine to "set_tone = lnbp21_set_tone" is not correct for "NetUP Dual DVB-S2-CI card". Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13947): add __init/__exit macros to drivers/media/dvb/bt8xx/bt878.cPeter Huewe
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of drivers/media/dvb/bt8xx/bt878.c Please have a look at the small patch and either pull it through your tree, or please ack' it so Jiri can pull it through the trivial tree. Patch against linux-next-tree, 22. Dez 08:38:18 CET 2009 but also present in linus tree. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13969): frontends/si21xx.c: Remove #define TRUE/FALSE, use boolJoe Perches
And a little code refactoring/neatening around the removals Reduces object size a little bit: new: $ size drivers/media/dvb/frontends/si21xx.o text data bss dec hex filename 8984 56 1816 10856 2a68 drivers/media/dvb/frontends/si21xx.o old: $ size drivers/media/dvb/frontends/si21xx.o text data bss dec hex filename 9084 56 1792 10932 2ab4 drivers/media/dvb/frontends/si21xx.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13965): zl10039, jump to error on errorJiri Slaby
Stanse found an unreachable statement in zl10039_attach. There is a `break' followed by `goto error'. Remove that break, so that it can handle the error. Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13963): siano, fix memory leakJiri Slaby
Stanse found a memory leak in smscore_gpio_configure. buffer is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13956): fix weird array index in zl10036.cDan Carpenter
I was initially concerned about the weird array index (the 2 bumps into the next row of the array). Matthias Schwarzott look at the datasheet and it turns out it should be zl10036_init_tab[1][0] |= 0x01; Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13953): firedtv: add missing NULL pointer checkStefan Richter
If there is ever going to be a FireDTV or FloppyDTV firmware which does not provide a minimal ASCII textual descriptor for Model_Id --- or if the descriptor is provided indirectly in a descriptor directory --- the ieee1394 variant of the device probe of firedtv would dereference a NULL pointer. The firewire variant of firedtv's device probe is not affected. The fix makes sure that such an unexpected firmware is safely recognized by fdtv_alloc as an unknown firmware. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13950): usb-friio: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13949): Move a dereference below a NULL testJulia Lawall
If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13946): proc_fops: convert av7110Alexey Dobriyan
Drop S_IRUGO, proc entry doesn't contain read hooks. Drop S_IFREG, simply unnecessary. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13930): dib0700: rework IR logic for firmware 1.20Devin Heitmueller
When firmware 1.20 was introduced, the dib0700 switched from a polling model using a USB control message, to the messages being delivered on a USB bulk pipe. The code I originally added would do a blocking read on the pipe with a 50ms timeout. Because the dvb-usb-remote code makes use of the global workqueue, this resulted in the global workqueue being blocked 50% of the time. Also, the synchronous urb_bulk_msg() call would burn excess CPU time (reflected as an abnormal increase in the system's load average when devices were connected). Rework the logic so that we now setup an asynchronous callback on the bulk pipe, so that we now only handle RC data when it arrives on the pipe. Note that we provide a stub function for the RC polling callback so that we can continue to leverage the shared code in dvb-usb-rc for the setting up of the input device. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13879): dvb_frontend: report what ioctl were called on debug modeMauro Carvalho Chehab
When printing that an iocl were called, report the ioctl number. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13878): dvb_frontend: Print dump on get after filling the dataMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13848): smsdvb: Add the proper status for IsRfLockedMauro Carvalho Chehab
Now, if RF is locked but demod is not locked, it will report: >>> tuning status == 0x03 This happens, for example, if the device is on DVB-T, and the video standard is ISDB-T. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13847): smsdvb: Remove a wrong debug messageMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13846): smsdvb: Properly implement stats for both DVB and ISDB-TMauro Carvalho Chehab
After taking a look at the driver's history and doing some tests with DVB and ISDB-T, it was noticed that the stats were incomplete, for ISDB-T, and weren't working for DVB. Fixed the code and added a debug code to print the complete stats at dmesg. This debug is useful to improve the stats of this driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13845): smsdvb: Fix the frequency switch that broke with v5 API ↵Mauro Carvalho Chehab
conversion Bandwidth is in Hz, not in kHz. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13844): smsdvb: Properly report the Delivery SystemMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13843): dib8000: Properly report Delivery System as SYS_ISDBTMauro Carvalho Chehab
Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13842): smsdvb: Convert it to use DVB API v5 (S2API)Mauro Carvalho Chehab
Based on a patch originally written by Michael Krufky <mkrufky@linuxtv.org> for a preliminar S2API spec. The patch were ported to the S2API and had the ISDB-T API additions to honor the auto mode, while keep allowing manual tuning. Tested with both the original dvb-apps and the new dvb-apps-isdbt scan, that uses a different channel.conf and uses S2API with ISDB-T extensions. Thanks-to: Michael Krufky <mkrufky@linuxtv.org> for his first version Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13841): smsdvb: Make stats to workMauro Carvalho Chehab
Siano series of patches seemed to cause a regression on reporting DTV statistics. Due to that, signal indication weren't received, preventing applications like scan to work. Tested with ISDB-T signals and got the same scan result as with a dib0700/dib8000 device. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13840): smsusb: Add ISDB-T firmware for Hauppauge ↵Michael Krufky
WinTV-Nova-T-MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13839): smsdvb: add ISDB-T as DVB-T tuning support hackMichael Krufky
Activate ISDB-T mode using module option default_mode=6. hack: use 4 lower bits in frequency for segment number [mchehab@redhat.com: fix merge conflicts and CodingStyle] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13838): atbm8830: use AGC setting from configDavid Wong
Improves ATBM8830 reception by using per card AGC configuration rather than register default. Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13818): Add Prof 7500 DVB-S2 USB cardIgor M. Liplianin
The card based on stv0903 demod, stb6100 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-25 04:47:20 +0000