aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/Makefile
AgeCommit message (Collapse)Author
2009-04-06V4L/DVB (11366): v4l: remove obsolete header and sourceHans Verkuil
v4l2-subdev.c and v4l2-i2c-drv-legacy.h were used to support the old i2c API. All v4l drivers are now converted to v4l2_subdev, so these two files can be removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (10954): Add cx231xx USB driverSri Deevi
Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> [mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11350): Add camera (CSI) driver for MX1Paulius Zaleckas
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture deviceJanne Grunau
The device encodes component video up to 1080i to a MPEG-TS stream with H.264 video and stereo AAC audio. Newer firmwares accept also AC3 (up to 5.1) audio over optical SPDIF without reencoding. Firmware upgrade is unimplemeted but rather unimportant since the firmware sits on a flash chip. The I2C adapter to drive the integrated infrared receiver/sender is currently disabled due to a conflict with cx18-based devices. Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10909): tvmixer: remove last remaining references to this deleted ↵Hans Verkuil
module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10714): zoran et al: convert zoran i2c modules to V4L2.Hans Verkuil
The zoran i2c modules were still using V4L1 internally. Replace this with V4L2. Also deleted saa7111.c and saa7114.c, we use saa7115.c instead. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> [mchehab@redhat.com: fix v4l2_ctrl_query_fill_std merge conflict] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10674): soc-camera: camera host driver for i.MX3x SoCsGuennadi Liakhovetski
Tested with 8 bit Bayer and 8 bit monochrome video. create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h create mode 100644 drivers/media/video/mx3_camera.c Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10137): v4l2-compat32: only build if neededHans Verkuil
Add CONFIG_COMPAT check in Makefile. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10099): soc-camera: add support for MT9T031 CMOS camera sensor from ↵Guennadi Liakhovetski
Micron This camera is rather similar to MT9M001, but also has a couple of enhanced features, like pixel binning. create mode 100644 drivers/media/video/mt9t031.c Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10094): Add tw9910 driverKuninori Morimoto
This patch adds tw9910 driver that use soc_camera framework. It was tested on SH Migo-r board and mplayer. create mode 100644 drivers/media/video/tw9910.c create mode 100644 include/media/tw9910.h Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9820): v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 ↵Hans Verkuil
framework. Start implementing a proper v4l2 framework as discussed during the Linux Plumbers Conference 2008. Introduces v4l2_device (for device instances) and v4l2_subdev (representing sub-device instances). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Andy Walls <awalls@radix.net> Reviewed-by: David Brownell <david-b@pacbell.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driverVaibhav Hiremath
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Hardik Shah <hardik.shah@ti.com> Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: R Sivaraj <sivaraj@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Karicheri Muralidharan <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: David Brownell <david-b@pacbell.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9815): omap2: add OMAP2 camera driver.Sakari Ailus
Add a driver for the OMAP2 camera block. OMAP2 is used in e.g. Nokia N800/N810 internet tablet. This driver uses the V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI cardIgor M. Liplianin
The card based on stv0299 or stv0288 demodulators. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9488): Add ov772x driverKuninori Morimoto
This patch adds ov772x driver that use soc_camera framework. It was tested on SH Migo-r board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9484): v4l: rename compat_ioctl32.c to v4l2-compat-ioctl32.cHans Verkuil
All core v4l sources should start with 'v4l2-' This file was the last one for which this was not the case. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9129): zoran: move zoran sources into a zoran subdirectoryHans Verkuil
Prevent the zoran driver sources from cluttering the video directory. This changeset only moves the drivers and it does not fix any of the checkpatch warnings/errors to keep the changeset clean. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8690): tuner-3036: remove driverHans Verkuil
This driver is for VERY old i2c-over-parallel port teletext receiver boxes. Rather then spending effort on converting this driver to V4L2, and since it is extremely unlikely that anyone still uses one of these devices, it was decided to drop it (after discussing this as well with the original author, Phil Blundell). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8689): dpc7146: remove dpc7146 demonstration board driverHans Verkuil
Old driver for the dpc7146 demonstration board that is no longer relevant. The last time this was tested on actual hardware was probably around 2002. Since this is a driver for a demonstration board the decision was made (after discussing this with the original author, Michael Hunold) to remove it rather than spending a lot of effort continually updating this driver to stay in sync with the latest internal V4L2 or I2C API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Hunold <hunold@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8684): Add support for Micron MT9M111 camera.Robert Jarzmik
Adds support for Micron MT9M111 camera chip, with basic features : - view rectangle configurable - some output formats (bayer8, bayer10, rgb565, rgb555, ycbycr) - autoexposure - only highpower mode context used (ie. context B) create mode 100644 drivers/media/video/mt9m111.c Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8726): link tuner before saa7134Simon Arlott
If saa7134_init is run before v4l2_i2c_drv_init (tuner), then saa7134_board_init2 will try to set the tuner type for devices that don't exist yet. This moves tuner to before all of the device-specific drivers so that it's loaded early enough on boot. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8485): v4l-dvb: remove broken PlanB driverAdrian Bunk
The PlanB driver has been broken since around May 2004. No one stepped in to maintain it, so it is now being removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Michel Lanners <mlan@cpu.lu> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8427): videodev: split off the ioctl handling into v4l2-ioctl.cHans Verkuil
videodev.c became top-heavy so all the ioctl processing has been split off into v4l2-ioctl.c. This means videodev.c is back to its original purpose: creating and registering v4l devices. Since videodev.c and v4l2-ioctl.c should still remain one module (as least for now) I also had to rename videodev.c to v4l2-dev.c to prevent a circular dependency when building a videodev.ko module. This is not a bad thing, since the source and header now have the same name. And the v4l2- prefix is useful to see which sources are generic v4l2 support code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8343): soc_camera_platform: Add SoC Camera Platform driverMagnus Damm
This patch adds a simple platform camera device. Useful for testing cameras with SoC camera host drivers. Only one single pixel format and resolution combination is supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3Magnus Damm
This is V3 of the SuperH Mobile CEU soc_camera driver. The CEU hardware block is configured in a transparent data fetch mode, frames are captured from the attached camera and written to physically contiguous memory buffers provided by the newly added videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors. Changes since V2: - remove SUPERH Kconfig dependency - move sh_mobile_ceu.h to include/media - add board callback support with enable_camera()/disable_camera() - add support for declare_coherent_memory - rework video memory limit - more verbose error messages Changes since V1: - fixed the CEU driver to work with the newly updated patches Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8341): videobuf: Add physically contiguous queue code V3Magnus Damm
This is V3 of the physically contiguous videobuf queues patch. Useful for hardware such as the SuperH Mobile CEU which doesn't support scatter gatter bus mastering. Since it may be difficult to allocate large chunks of physically contiguous memory after some uptime due to fragmentation, this code allocates memory using dma_alloc_coherent(). Architectures supporting dma_declare_coherent_memory() can easily avoid fragmentation issues by using dma_declare_coherent_memory() to force dma_alloc_coherent() to allocate from a certain pre-allocated memory area. Changes since V2 - use dma_handle for physical address - use "scatter gather" instead of "scatter gatter" Changes since V1: - use dev_err() instead of pr_err() - remember size in struct videobuf_dma_contig_memory - keep struct videobuf_dma_contig_memory in .c file - let videobuf_to_dma_contig() return dma_addr_t - implement __videobuf_sync() - return statements, white space and other minor fixes Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8157): gspca: all subdriversJean-Francois Moine
- remaning subdrivers added - remove the decoding helper and some specific frame decodings Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.Dean Anderson
It was primarily developed by Dean Anderson with only a little bit of guidance and cleanup by Greg. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [mchehab@infradead.org: fixed renamed callbacks] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-30V4L/DVB (8145a): USB Video Class driverLaurent Pinchart
This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7846): Re-creates VIDEO_TUNERMauro Carvalho Chehab
VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the previous behaviour before the creation of MEDIA_TUNER. Before this patch, tuner.ko were created even for drivers that don't need a tuner (like webcam drivers). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chipHans Verkuil
Many thanks to Steve Toth from Hauppauge and Nattu Dakshinamurthy from Conexant for their support. I am in particular thankful to Hauppauge since without their help this driver would not exist. It should also be noted that Steve did the work to get the DVB part up and running. Thank you! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: G. Andrew Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab
namespace for all of them.
2008-04-29V4L/DVB(7767): Move tuners to common/tunersMauro Carvalho Chehab
There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USBSteven Toth
Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7535): saa717x: add new audio/video decoder i2c driverHans Verkuil
Added the last remaining out-of-tree kernel driver from the ivtv project. The saa717x is used in several Japanese cards and a Russian card. The driver is not complete in that only NTSC is supported and no PAL/SECAM. Hopefully this will be added in the future. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7483): tuner-simple: fix broken build dependencyMichael Krufky
tuner-simple is the only module that uses tuner-types - these will be merged to a single module in the future. For now, build both of them if TUNER_SIMPLE is selected. This fixes the following build warning, if tuner-simple is selected without tuner-types: WARNING: "tuner_count" [tuner-simple.ko] undefined! WARNING: "tuners" [tuner-simple.ko] undefined! Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7174): Add support for the MT9V022 cameraGuennadi Liakhovetski
This driver supports Micron MT9V022 colour camera. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7173): Add support for the MT9M001 cameraGuennadi Liakhovetski
This driver supports Micron MT9M001 monochrome and colour cameras. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7578a): V4L: V4L2 soc_camera driver for PXA270Guennadi Liakhovetski
This patch adds a driver for the Quick Capture Interface on the PXA270. It is based on the original driver from Intel, but has been re-worked multiple times since then, now it also supports the V4L2 API. This patch depends on a complementary patch, submitted to the ARM tree, providing PXA270 camera platform bindings. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7170): soc_camera V4L2 driver for directly-connected SoC-based camerasGuennadi Liakhovetski
This driver provides an interface between platform-specific camera busses and camera devices. It should be used if the camera is connected not over a "proper" bus like PCI or USB, but over a special bus, like, for example, the Quick Capture interface on PXA270 SoCs. Later it should also be used for i.MX31 SoCs from Freescale. It can handle multiple cameras and / or multiple busses, which can be used, e.g., in stereo-vision applications. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7125): tuner: build tuner-types independently of tuner-coreMichael Krufky
tuner-types is needed for tuner-simple, and does not need to be bound to tuner-core. Any caller of tuner-simple, including tuner-core, needs to pass a structure from tuner-types into tuner-simple at attach-time. Export the two needed symbols from tuner-types for now, so that card-level drivers can attach tuner-simple for hybrid dvb_frontend devices. We will remove this dependency altogether as tuner refactoring phase 3 progresses. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7115): Fix bug #9833: regression when compiling V4L without I2CMauro Carvalho Chehab
Adrian Bunk reported: > > Commit 8ffbc6559493c64d6194c92d856196fdaeb8a5fb causes the following > > compile error with CONFIG_VIDEO_DEV=y/m, CONFIG_I2C=n: > > > > <-- snip --> > > > > ... > > MODPOST 26 modules > > ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined! > > make[2]: *** [__modpost] Error 1 > > > > <-- snip --> ... And what should happen if CONFIG_VIDEO_DEV=y, CONFIG_I2C=m? CC: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-06scheduled OSS driver removalAdrian Bunk
This patch contains the scheduled removal of OSS drivers whose config options have been removed in 2.6.23. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-25V4L/DVB (7019): V4L: add support for Syntek DC1125 webcamsJaime Velasco Juan
This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6869): cs5345: new i2c driverHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB(6548a) Fix compilation for TDA8290Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> drivers/media/video/tda8290.c:27:21: error: tda827x.h: No such file or directory drivers/media/video/tda8290.c:28:22: error: tda18271.h: No such file or directory drivers/media/video/tda8290.c:52: error: field 'cfg' has incomplete type drivers/media/video/tda8290.c: In function 'tda829x_find_tuner': drivers/media/video/tda8290.c:590: error: implicit declaration of function 'tda18271_attach' drivers/media/video/tda8290.c:598: error: implicit declaration of function 'tda827x_attach' Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6486): m52790: add new Mitsubishi A/V switch i2c driverHans Verkuil
This driver is used by the ASUS Falcon2 cx23416-based cards. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6443): make tda9887 build selectable via KconfigMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6430): Convert tuner-xc2028 driver to the newer hybrid approachMauro Carvalho Chehab
This changeset converts tuner-xc2028 to the newer hybrid approach. It also prevents creating twice the xc3028 private struct by both DVB and V4L parts. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6423): Add tuner-xc2028 driverMauro Carvalho Chehab
Add support for Xceive XC2028/XC3028 tuner driver Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 10:47:29 +0000