aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/bt8xx
AgeCommit message (Collapse)Author
2007-07-03V4L/DVB (5808): Bttv: fix v4l1 breaking the driverTrent Piepho
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as the first user after the driver is loaded, the driver wedges itself and will never capture properly. Even if one uses a V4L2 application later, it still won't work. If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2 driver, then the driver will be ok. One can then run a V4L1 application, and it will work. It turns out the problem is with norm changing and the crop support that was added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was set too across opens. If one changes the norm via V4L1, the cropping parameters are not reset like they should be, and they'll remain broken across device opens. This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl VIDIOCSCHAN handler. The norm is set via the existing call to set_input(), which calls set_tvnorm(), which will reset the cropping values now that it is able to detect the norm change. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5497): Additional card support for bttv driverScott Alfter
SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5482): Bttv: automatically load dvb-bt8xx for bttv cards with dvbJarod Wilson
This patch causes the bttv driver to automatically load the dvb-bt8xx module for bttv/dvb hybrid cards. Successfully tested with a pcHDTV HD-2000 card. This patch is based on the recent patches to enable autoloading of cx88-dvb, cx88-blackbird and saa7134-dvb. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5479): Use ARRAY_SIZE instead of a magic numberMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.cMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5476): Fix gpiomux array sizeMauro Carvalho Chehab
there were several "magic" for loops, addressing gpiomux array size (4). Adrian Bunk showed that one of the loops were wrong, going from 0 to 4. This patch provides the right fix for this trouble, by using ARRAY_SIZE on all places where we have a for loop using gpiomux. Thanks to: Adrian Bunk <bunk@stusta.de> for pointing me about this trouble. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5278): Bt8xx/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - remove the following unused global functions: - bttv-if.c: bttv_get_cardinfo() - bttv-if.c: bttv_get_id() - bttv-if.c: bttv_get_gpio_queue() - bttv-if.c: bttv_i2c_call() - remove the following unused EXPORT_SYMBOL's: - bttv-gpio.c: bttv_sub_bus_type - bttv-gpio.c: bttv_gpio_inout - bttv-gpio.c: bttv_gpio_read - bttv-gpio.c: bttv_gpio_write - bttv-gpio.c: bttv_gpio_bits Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5156): Fix: dma free is being called with wrong argumentsMichael Schimek
Functions buffer_release() in bttv-driver.c and vbi_buffer_release() in bttv-vbi.c are ending with: bttv_dma_free(&fh->cap,fh->btv,buf); For vbi it seems to be wrong. Both functions should end with: bttv_dma_free(q,fh->btv,buf); Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5077): Bttv cropping supportMichael Schimek
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting applications to capture or overlay a subsection of the picture or to extend the capture window beyond active video, into the VBI area and the horizontal blanking. VBI capturing can start and end on any line, including the picture area, and apps can capture different lines of each field and single fields. For compatibility with existing applications, the open() function resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP call is necessary to actually enable cropping. Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image width will increase from 640 and 768 to 747 and 923 pixels respectively. Like the VBI changes however, this should only affect applications which depend on former driver limitations, such as never getting more than 640 pixels regardless of the requested width. Also, new freedoms require additional checks for conflicts and some applications may not expect an EBUSY error from the VIDIOC_QBUF and VIDIOCMCAPTURE ioctls. These errors should be rare though. So far, the patch has been tested on a UP machine with a bt878 in PAL- BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/ libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2 I'd be grateful about comments or bug reports. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5061): Bt8xx: add support for Ultraview DVB-T LiteMichael Krufky
Ultraview DVB-T Lite is a clone of DViCO FusionHDTV DVB-T Lite Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5025): Cleanup: switch to using msecs_to_jiffies() on bttvDmitry Torokhov
PS.: Part of the changes at the original patch were removed due to the changes done at commit 52c14e794f6ce345343a6b8fc98ea4e0ba2dfce4 Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5017): DVB: fix compile errorAdrian Bunk
This patch fixes the following compile error: <-- snip --> ... LD drivers/media/video/built-in.o drivers/media/video/saa7134/built-in.o:(.data+0x85ec): multiple definition of `ir_rc5_remote_gap' drivers/media/video/bt8xx/built-in.o:(.data+0x734c): first defined here drivers/media/video/saa7134/built-in.o:(.data+0x85f0): multiple definition of `ir_rc5_key_timeout' drivers/media/video/bt8xx/built-in.o:(.data+0x7350): first defined here make[4]: *** [drivers/media/video/built-in.o] Error 1 <-- snip --> Since this variables were needlessly global, this patch implements the trivial fix of making them static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5012a): Remove some unused code from kernel mainstreamMauro Carvalho Chehab
There are some long time unused code under some media driver source files. There's no need of keeping it at mainstream. Those unused code will remain available at V4L/DVB master tree and also at kernel history. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (4961): Add support for the ASUS P7131 remote controlHermann Pitton
Besides adding the board specific code, this patch moves the RC5 decoding code from bt8xx to ir-functions.c to make it available for all drivers. Signed-off-by: Marc Fargas <telenieko.telenieko.com> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct file_operations const 4Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-27V4L/DVB (4997): Bttv: delete duplicated ioremap()Akinobu Mita
ioremap() is called twice to same resource. The returen value of first one is not error-checked. second one is complely ignored. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-12Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix OMAP clock prescaler to match the comment i2c: Refactor a kfree in i2c-dev i2c: Fix return value check in i2c-dev i2c: Enable PEC on more i2c-i801 devices i2c: Discard the i2c algo del_bus wrappers i2c: New ARM Versatile/Realview bus driver i2c: fix broken ds1337 initialization i2c: i2c-i801 documentation update i2c: Use the __ATTR macro where possible i2c: Whitespace cleanups i2c: Use put_user instead of copy_to_user where possible i2c: New Atmel AT91 bus driver i2c: Add support for nested i2c bus locking i2c: Cleanups to the i2c-nforce2 bus driver i2c: Add request/release_mem_region to i2c-ibm_iic bus driver i2c: New Philips PNX bus driver i2c: Delete the broken i2c-ite bus driver i2c: Update the list of driver IDs i2c: Fix documentation typos
2006-12-10i2c: Discard the i2c algo del_bus wrappersJean Delvare
They are all only calling i2c_del_adapter, so we may as well do it directly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-10V4L/DVB (4854): Handle errors from input_register_device()Dmitry Torokhov
Also sprinkled some input_sync() throughout the code. Acked-by: Ricardo Cerqueira <v4l@cerqueira.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4825): FIX bug 5760: audio were not working on some bttv driversMauro Carvalho Chehab
This fixes a bug introduced by the -git commit: bbf7871e1cd58b89f77b1152f457250c6e94b614 It seems that some bttv apps can't work fine when audioset=0. Thanks to Christian Casteyde <casteyde.christian@free.fr> for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4817): Fix uses of "&&" where "&" was intendedJean Delvare
Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03V4L/DVB (4698): Fix S-Video configuration for Pinnacle PCTV-SatMauro Carvalho Chehab
Thanks to Edgar Toernig <froese@gmx.de> for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-30Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (180 commits) V4L/DVB (4641): Trivial: use lowercase letters in hex subsystem ids V4L/DVB (4639): Cx88: add autodetection for alternate revision of Leadtek PVR V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300. V4L/DVB (4637): Add a default method for VIDIOC_G_PARM V4L/DVB (4635): Extend bttv and saa7134 to check for both AGP and PCI PCI failure case V4L/DVB (4634): Zr36120: implement pcipci checks V4L/DVB (4632): Zoran: Implement pcipci failure check V4L/DVB (4631): Av7110: remove V4L2_CAP_VBI_CAPTURE flag V4L/DVB (4630): Av7110: FW_LOADER depemdency fixed V4L/DVB (4629): Saa7134: add card support for Proteus Pro 2309 V4L/DVB (4628): Fix VIDIOC_ENUMSTD ioctl in videodev.c V4L/DVB (4627): Vivi crashes with mplayer V4L/DVB (4626): On saa7111/7113, LUMA_CTRL need a different value V4L/DVB (4624): Tvaudio: Replaced kernel_thread() with kthread_run() V4L/DVB (4622): Copy-paste bug in videodev.c V4L/DVB (4620): Fix AGC configuration for MOD3000P-based boards V4L/DVB (4619): Fixes some I2C dependencies on V4L devices V4L/DVB (4617): Problem with dibusb-mb.c USB IDs V4L/DVB (4616): [PATCH] Nebula DigiTV USB RC support V4L/DVB (4614): Export symbol saa7134_tvaudio_setmute from saa7134 for saa7134-alsa ...
2006-09-26i2c-algo-bit: Discard the mdelay data struct memberJean Delvare
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26V4L/DVB (4635): Extend bttv and saa7134 to check for both AGP and PCI PCI ↵Alan Cox
failure case We could go and work out if the target object is AGP or PCI but the corner case of an Athlon 64 era box with PCI video is sufficiently unusual it doesn't seem worth the extra work, at least until other cases if any pop up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4609): Improved i2c performance on software bitbang algoritmMauro Carvalho Chehab
Software I2C were using a very conservative value of udelay=16, meaning about 20Kbps. According with Philips I2C datasheet, the i2c should answer well for times at the order of 4.7 us. So, using udelay=5 should work for all devices. After this patch, the speed should be close to 66,67 Kbps, with the current kernel software bitbang, with 30/60 duty cycle. Anyway, added a new parameter (i2c_udelay) that would allow using conservative values, if eventually a hardware doesn't support the datasheet values. Thanks to Jean Delvare <khali@linux-fr.org> for pointing this improvement. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4518): Allow manually selecting the proper helper driversMauro Carvalho Chehab
There are several boards on V4L that can work with several different helper modules for audio/video encoding/decoding and similar stuff. This patch adds the capability of choicing between autoselecting the pertinent helper modules for each driver, or to manually selecting them. Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4513): Split audio decoders from bttvMauro Carvalho Chehab
Several audio decoders were just bound as if they were part of bttv driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4499): CONFIG_PM=n slim: drivers/media/video/*Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4490): Whitespace cleanupTrent Piepho
from whitespace cleaning script Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4474): On some cases, depth were not returned.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900.Mauro Carvalho Chehab
Previously, this were reported: Ooops: IR config error [card=139] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works betterTrent Piepho
A previous patch changed VBI_OFFSET to match what the datasheets say it should be. However, the bt8x8 datasheets are wrong. The old value of 244 is closer to what is actually observed. The real value appears to not be constant and is different for different chip revisions. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4368): Bttv: use class_device_create_file and handle errorsTrent Piepho
Revert bttv-driver.c from video_device_create_file() to use class_device_create_file() again. video_device_create_file() is only available when V4L1 is on. Proper error checking is added for failure of class_device_create_file(). Will print error message and unroll partially created sysfs entries. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4344): Fix broken dependencies on media Kconfig Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4316): Check __must_check warningsMichael Krufky
Check __must_check warnings for class_device_register and class_device_create_file video_device_create_file was declared as a void, but instead should return the int value of class_device_create_file. Move the check from bttv-driver.c into v4l2-dev.h, because all other callers of video_device_create_file must also be checked. Replace the call to class_device_create_file in videodev.c with video_device_create_file, as defined in v4l2-dev.h, so that the return value of class_device_create_file will be checked. Check the return value of class_device_register in videodev.c and pvrusb2-sysfs.c Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4298): Check all __must_check warnings in bttv.Randy Dunlap
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-02[PATCH] irq-flags: media: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30V4L/DVB (4267): Remove all instances of request_module("tda9887")Michael Krufky
We should no longer try to load the tda9887 module, because it no longer exists. The tda9887 driver has been merged into the tuner module. This patch removes all instances of request_module("tda9887") from the following video4linux drivers: bttv, cx88, em28xx and saa7134. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30typo fixes: aquire -> acquireAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in video driversGreg Kroah-Hartman
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26spelling fixesAndreas Mohr
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card.Cameron Hutchinson
Signed-off-by: Cameron Hutchinson <camh@xdna.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4118): Whitespace cleanupsTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4068): Removed all references to kernel stuff from videodev.h and ↵Mauro Carvalho Chehab
videodev2.h The videodev.h and videodev2.h describe the public API for V4L and V4L2. It shouldn't have there any kernel-specific stuff. Those were moved to v4l2-dev.h. This patch removes some uneeded headers and include v4l2-common.h on all V4L driver. This header includes device implementation of V4L2 API provided on v4l2-dev.h as well as V4L2 internal ioctls that provides connections between master driver and its i2c devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4058): Bttv: add autodetection support for Osprey 230Michael Krufky
- use eeprom data to detect Osprey 230 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>