aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/cx18
AgeCommit message (Collapse)Author
2008-07-27V4L/DVB (8534): remove select's of FW_LOADERAdrian Bunk
After commit d9b19199e4894089456aaad295023263b5225c1a (always enable FW_LOADER unless EMBEDDED=y) we can remove the FW_LOADER select's and corresponding dependencies on HOTPLUG. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27V4L/DVB (8523): v4l2-dev: remove unused type and type2 field from video_deviceHans Verkuil
The type and type2 fields were unused and so could be removed. Instead add a vfl_type field that contains the type of the video device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8482): videodev: move all ioctl callbacks to a new v4l2_ioctl_ops ↵Hans Verkuil
struct All ioctl callbacks are now stored in a new v4l2_ioctl_ops struct. Drivers fill in a const struct v4l2_ioctl_ops and video_device just contains a const pointer to it. This ensures a clean separation between the const ops struct and the non-const video_device struct. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8462): cx18: Lock the aux PLL to the video pixle rate for analog ↵Andy Walls
captures cx18: Lock the aux PLL to the video pixel rate for analog captures. The datasheet for the CX25840 says this is important for MPEG encoding applications. To ensure the PLL locking was correct, also fixed the aux PLL's multiplier to be computed based on a precise crystal freq of 4.5 MHz/286 * 455/2 * 8 = 28636363.6363... instead of the imporperly rounded 28636363. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8461): cx18: Fix 32 kHz audio sample output rate for analog tuner ↵Andy Walls
SIF input cx18: Fix 32 kHz audio sample output rate for analog tuner SIF input so it works. The AUX_PLL VCO was being operated at 196.6 MHz out of the spec'ed 200-600 MHz range. Fixed the multipler and post dividers to operate the VCO within specification and added comments on how magic numbers are derived. Thanks to Hans Verkuil for pointing out this interesting problem to solve. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to ↵Hans Verkuil
v4l2-common.h or v4l2-ioctl.h The functions in a header should not belong to another module. The prio functions belong to v4l2-common.c, so move them to v4l2-common.h. The ioctl functions belong to v4l2-ioctl.c, so create a new v4l2-ioctl.h header and move those functions to it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8428): videodev: rename 'dev' to 'parent'Hans Verkuil
The field 'dev' is not the video device, but the parent of the video device. Rename accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8423): cx18: remove firmware size checkHans Verkuil
This check was an ivtv leftover that served no purpose for the cx18. Removed it, as this allows the user to load different firmware versions. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-upsHans Verkuil
Fix a bug in get_index that was introduced earlier. Also fix two error handling lock-ups in videodev and cx18 that where found thanks to that bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to ↵Hans Verkuil
cx18_av_std_setup Same issue as for cx25840: this function sets up the standard timings and has nothing to do with VBI setup. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8377): ivtv/cx18: ensure the default control values are correctHans Verkuil
For several MPEG controls and the volume control the default as returned by VIDIOC_QUERYCTRL was incorrect and did not match the actual initial value. This is now fixed for cx18 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8332): cx18: Suport external reset of the Z8F0811 IR controller on ↵Andy Walls
HVR-1600 for lirc cx18: added in cx18_ir_reset_gpio function for lirc_pvr150 like module. Also added the ability to reset the IR chip via ioctl like ivtv. This needs the mutex to protect gpio_dir and gpio_val in struct cx18 as gpio changes can come from a few different asynchronous sources now. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8331): cx18: Add locking for struct cx18 GPIO state variablesAndy Walls
cx18: Add locking for struct cx18 GPIO state variables in anticpation of adding IR microcontroller reset support for use by external IR modules. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20v4l-dvb: remove legacy checks to allow support for kernels < 2.6.10Hans Verkuil
Also remove some blank lines that were used to split compat code at -devel tree. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8189): cx18: Use correct GPIO pin for resetting Xceive 3028 tuner ↵Andy Walls
on Yuan MPC718 Change the Yuan MPC718 cards entry to use the correct GPIO pin for resetting the Xceive 3028 tuner. Thanks to Brian Hope <brian@hopefamily.info> for taking the time and figuring out which pin to use. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8188): cx18: Add missing reset recovery delay in cx18-i2c.cAndy Walls
cx18: Add a missing reset recovery delay in cx18-i2c.c after the final deassert. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8169): cx18: enable TS supportHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8168): cx18: Upgrade to newer firmware & update cx18 documentation.Hans Verkuil
Conexant graciously gave us permission to redistribute the firmware. Update the documentation where the firmware can be downloaded. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8167): cx18: set correct audio inputs for tuner and line-in 2.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8165): cx18: fix v4l-cx23418-dig.fw firmware load.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8164): cx18/ivtv: choose a better initial TV standard for cards ↵Hans Verkuil
without eeprom. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8162): cx18: fix PAL/SECAM supportHans Verkuil
Reverted the 'Fix unintended auto configurations in cx18-av-core' patch, instead disable the auto config completely. Fix a bug in cx18_av_vbi_setup() where the standard tests were done in the wrong order. Tested with NTSC-M, PAL-BG, PAL-I, PAL-DK, PAL-M, PAL-Nc, SECAM-DK, SECAM-L and SECAM-BG. The last one does not work at the moment due to a tda9887.c bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8114): cx18: Improve Raptor card audio input routing defintionsAndy Walls
cx18: Improved Raptor card audio input routing defintions, so that muxer values matched cx18_gpio() values for tuner, line in 1, and radio and added LED indication of selected audio input. Audio line in 2 doesn't work as it uses the not yet supported 2nd I2S port. Tuner/FM Radio AF is mono until SIF support is fixed. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8113): ivtv/cx18: remove s/g_ctrl, now all controls are handled ↵Hans Verkuil
through s/g_ext_ctrl videodev converts old-style controls to an extended control so the ivtv and cx18 drivers no longer have to handle both. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8111): ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is ↵Hans Verkuil
not defined. Thanks to Randy Dunlap for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8107): cx18: improve support for the Raptor board.Hans Verkuil
- add radio definition - reset the audio firmware (required for this board, harmless for the others) Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8106): ivtv/cx18: improve tuner std check in card definitions.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8105): cx2341x: add TS capabilityHans Verkuil
The cx18 can support transport streams with newer firmwares. Add a TS capability to the generic cx2341x module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8104): cx18/ivtv: ioctl debugging improvementsHans Verkuil
Completely rely on the video_ioctl2 debugging facilities rather than doing it ourselves. Fill in some missing fields in ivtv with VIDIOC_G_FBUF. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8093): cx18: fix prefix typoHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8091): cx18: show GPIO pins when VIDIOC_LOG_STATUS is called.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM cardSri Deevi
Patch provided courtesy of Conexant http://www.conexant.com. Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8087): cx18: make sure all v4l2_format fields are filled inHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8086): ivtv/cx18: fix video_temporal_filter handlingHans Verkuil
If the capture is scaled, then the video_temporal_filter is set to 0 by the cx2341x.c module since otherwise you would get ghosting. However, this was also done in the VIDIOC_S_FMT ioctl which meant that the video_temporal_filter control was reset to 0 or 8 each time S_FMT was called. This was old code that should have been removed a long time ago. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8084): ivtv/cx18: remove unnecessary memsets & KERNEL_VERSION testsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8082): cx18: convert to video_ioctl2()Andy Walls
cx18: convert driver to use video_ioctl2(). Pushed down ioctl debug messages and priority checks as well. Still left serialization lock in place for now. #if 0'ed out sliced vbi ioctl code for now. Patch heavily based on similar changes made to ivtv by Hans Verkuil. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7924): ivtv/cx18: snprintf fixesJean Delvare
snprinf() takes the trailing \0 into account in its length calculations, so there is no need to subtract 1 to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-10Fix a const pointer error in the Conexant cx23418 MPEG encoder driverDavid Howells
Fix a const pointer to non-const pointer assignment error in the Conexant cx23418 MPEG encoder driver. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-06-26V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 ↵Andy Walls
and enable card entry cx18: Fix S-Video and Compsite input settings for the Yuan MPC718 per user reports from Yuri Warczynski <Yuri.Warczynski@gmail.com> and Brian Hope <brian@hopefamily.info> and enable the card entry. The tuner reset GPIO pin is likely incorrect as the tuner firmware cannot be reloaded without a reboot. It is likely the audio routing is done via GPIO which is not implemented yet, as users report audio doesn't work for some inputs. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initializationAndy Walls
cx18: Add I2C slave reset via GPIO upon initialization. One user, Michael <msd4824@yahoo.com>, has reported this allows his HVR-1600 EEPROM to be consistently recognized when using (long,) 100 msec delays. The delays in this commit are nominal (10 & 40 msec) and need testing/tuning on boards with I2C problems to find the right values. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8067): cx18: Fix firmware load for case when digital capture ↵Andy Walls
happens first This is a fix for the case when a digital capture from dvr0 happens first after modprobe, before access to any cx18 v4l2 device nodes. The initial dvb feed start has been changed to load the firmware if not already loaded. Also fixed a use counter to correct dvb feed accounting if starting the transport DMA fails. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 ↵Andy Walls
and FM radio Fix the cx18-cards.c structures for the HVR-1600 to reflect that audio Line In 2 and FM radio audio go to AIN3 and AIN4 of the CS5345 mux respectively. Verified by physical inspection of an HVR-1600MCE, by listening to FM broadcasts with the HVR-1600MCE, and by comparing with the card definition for a PVR-150 in ivtv. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-coreAndy Walls
Change the cx18-av-core code so that accesses to cx23418 av core that cause auto-configuration will be adjusted to emulate the auto-configuration behavior of the cx25843. This fixes the VBI displayed as video at the top of the frame for NTSC and probably other things. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISEMichael Krufky
The automatic Kconfig selection for tuners and frontends should be conditional, based on !DVB_FE_CUSTOMISE. This patch corrects the selection for VIDEO_CX18 on MEDIA_TUNER_MXL5005S and DVB_S5H1409 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8008): cx18: remove duplicate audio and video input enumsHans Verkuil
cx18-cards.h had a copy of the audio and video input enums from cx18-av-core.h, but with different prefixes. Removed that copy and used the ones from cx18-av-core.h. Thanks to Andy Walls <awalls@radix.net> for the report. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputsHans Verkuil
The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7978): cx18: explicitly test for XC2028 tunerHans Verkuil
Testing whether xceive_pin is non-zero is not good enough as 0 is a valid value. Instead explicitly test whether the Xceive tuner is used. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7977): cx18: fix init order and remove duplicate open_on_first_use.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7966): cx18: direct dereferencing of iomemAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7964): cx18 iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 14:56:05 +0000