aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/cx88
AgeCommit message (Collapse)Author
2006-11-13V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP ExpertHermann Pitton
fix remote control on WinFast 2000XP Expert by setting timing back to 1 ms, like it was in the original patch by Robert Reid. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14V4L/DVB (4692): Add WinTV-HVR3000 DVB-T supportSteven Toth
The WinTV-HVR3000 is currently defined for analog support only. This patch adds full DVB-T support. (DVB-S support will be added soon) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits) Add missing maintainer countries in CREDITS Fix bytes <-> kilobytes typo in Kconfig for ramdisk fix a typo in Documentation/pi-futex.txt BUG_ON conversion for fs/xfs/ BUG_ON() conversion in fs/nfsd/ BUG_ON conversion for fs/reiserfs BUG_ON cleanups in arch/i386 BUG_ON cleanup in drivers/net/tokenring/ BUG_ON cleanup for drivers/md/ kerneldoc-typo in led-class.c debugfs: spelling fix rcutorture: Fix incorrect description of default for nreaders parameter parport: Remove space in function calls Michal Wronski: update contact info Spelling fix: "control" instead of "cotrol" reboot parameter in Documentation/kernel-parameters.txt Fix copy&waste bug in comment in scripts/kernel-doc remove duplicate "until" from kernel/workqueue.c ite_gpio fix tabbage fix file specification in comments ... Fixed trivial path conflicts due to removed files: arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c
2006-10-03Still more typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03V4L/DVB (4689): Adding support for Nova-T-PCI PCI ID 0070:9000Steven Toth
Adding support for Nova-T-PCI PCI ID 0070:9000 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4684): Drivers/media/video/cx88: Remove unused defined FALSE/TRUERichard Knutsson
Remove defines of FALSE/TRUE because they are not used. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4683): Norm_notchfilter is used on just one point and argument is bogusMauro Carvalho Chehab
Removed norm_notchfilter function. All the code is bound to 4 x FSC, so, any other filter won't work fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4681): Cx88: fix analog capture notch filterLars Gjesse Kjellberg
This patch changes the setting of the cx2388x notch filter to match that of the video capture sample frequency, removing some annoying interference lines THAT would appear when capturing composite video. This has been tested in PAL and NTSC TV norms. It sets the Y/C separation luma notch filter, which removes the chroma signal from the luma signal when using a composite input. The luma notch filter operates at the video decoder's frequency, not the ADC's frequency or at the frequency of the scaled video. Y/C separation happens after the sample rate converter, before video scaling. The datasheet provides plots of the filter response for three _video decoder_ frequencies, 4x Fsc, square pixel, and ccir601. These are the same three frequencies for the notch filter control. It seems pretty clear that this filter should be set based on the video decoder frequency. The cx88 driver always uses a video decoder frequency of 4xFsc. Signed-off-by: Lars Gjesse Kjellberg <lars.g.kjellberg@get2net.dk> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4679): Fix for NULL pointer dereference oops during boot.Steven Toth
A fix for intermittent oops's during boot which occurs in cx88_call_i2c_clients when dvb_attach is bringing up the frontend. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4674): Use NULL instead of 0 for ptrsRandy Dunlap
Use NULL instead of 0 for pointer value, eliminate sparse warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4669): Cx88: autodetect Club3D Zap TV2100 by subsystem id 12ab:2300Michael Krufky
The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and KWorld/VStream XPert DVB-T with cx22702 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4668): Cx88: rename mpeg capability flags from CX88_BOARD_FOO to ↵Michael Krufky
CX88_MPEG_FOO The flags for mpeg capabilities are sub-optimally named as CX88_BOARD_DVB and CX88_BOARD_BLACKBIRD, which creates some confusion. This patch renames the above to CX88_MPEG_DVB and CX88_MPEG_BLACKBIRD. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4667): Changed cx88_board .dvb and .register to an enum.Steven Toth
Some basic cleanup in preperation for a future patch where the cx88-mpeg functions have to deal with the port being used by multiple frontends in (mpeg2 hw encoder and dvb demod). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4666): Ensure the WM8775 driver is loaded generically for any board.Steven Toth
A generic change to cards to allow any board to specify whether it needs the wm8775 module loaded (by the core) or not. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-30Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (180 commits) V4L/DVB (4641): Trivial: use lowercase letters in hex subsystem ids V4L/DVB (4639): Cx88: add autodetection for alternate revision of Leadtek PVR V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300. V4L/DVB (4637): Add a default method for VIDIOC_G_PARM V4L/DVB (4635): Extend bttv and saa7134 to check for both AGP and PCI PCI failure case V4L/DVB (4634): Zr36120: implement pcipci checks V4L/DVB (4632): Zoran: Implement pcipci failure check V4L/DVB (4631): Av7110: remove V4L2_CAP_VBI_CAPTURE flag V4L/DVB (4630): Av7110: FW_LOADER depemdency fixed V4L/DVB (4629): Saa7134: add card support for Proteus Pro 2309 V4L/DVB (4628): Fix VIDIOC_ENUMSTD ioctl in videodev.c V4L/DVB (4627): Vivi crashes with mplayer V4L/DVB (4626): On saa7111/7113, LUMA_CTRL need a different value V4L/DVB (4624): Tvaudio: Replaced kernel_thread() with kthread_run() V4L/DVB (4622): Copy-paste bug in videodev.c V4L/DVB (4620): Fix AGC configuration for MOD3000P-based boards V4L/DVB (4619): Fixes some I2C dependencies on V4L devices V4L/DVB (4617): Problem with dibusb-mb.c USB IDs V4L/DVB (4616): [PATCH] Nebula DigiTV USB RC support V4L/DVB (4614): Export symbol saa7134_tvaudio_setmute from saa7134 for saa7134-alsa ...
2006-09-26i2c-algo-bit: Discard the mdelay data struct memberJean Delvare
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26V4L/DVB (4641): Trivial: use lowercase letters in hex subsystem idsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4639): Cx88: add autodetection for alternate revision of Leadtek PVRMichael Krufky
Add autodetection for PCI subsystem ID 107d:6632, to detect as a Leadtek PVR 2000 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300.Steven Toth
This is the first in a series of patches to add full WinTV-HVR1300 support to Linux. This first patch will enable analog TV support and DVB-T support. Later patches will add the hardware MPEG encoder support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4609): Improved i2c performance on software bitbang algoritmMauro Carvalho Chehab
Software I2C were using a very conservative value of udelay=16, meaning about 20Kbps. According with Philips I2C datasheet, the i2c should answer well for times at the order of 4.7 us. So, using udelay=5 should work for all devices. After this patch, the speed should be close to 66,67 Kbps, with the current kernel software bitbang, with 30/60 duty cycle. Anyway, added a new parameter (i2c_udelay) that would allow using conservative values, if eventually a hardware doesn't support the datasheet values. Thanks to Jean Delvare <khali@linux-fr.org> for pointing this improvement. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4509): Added missing copyrightMauro Carvalho Chehab
Several changes at register stuff were done since commit b45009b0288a96a3458f4f8e93cb776678d41875, but I've forgot to add the copyright line for this. Those changes allowed cx88 to have multiple tuners, allowing it to support hardware with separated radio and video tuners. It also allows binding a tuner to an specific i2c address. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4504): Enable audio DMA restart on channel change even when ↵Ricardo Cerqueira
cx88-alsa is compiled cx88-alsa can be compiled in (in distro built kernels, for example), but not used. In those cases, the audio DMA restart is needed for proper sound on NICAM channels. This patch enables the DMA restart even with ALSA, but the functions now check if cx88-alsa is really active. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4499): CONFIG_PM=n slim: drivers/media/video/*Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4497): Reset USB part of DViCO Dual Digital during PCI driver attachChris Pascoe
If the FX2 does not reset properly during reboot, it can present an invalid USB device ID and fail to attach. Prevent this situation from occuring by resetting the USB part of the card when the PCI part probes. Also fix the GPIO configurations so that analog capture will not inadvertantly reset the USB part. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4479): LNB voltage control was inverted for the benefit of ↵Yeasah Pell
geniatech cards on Kworld 1) It sets LNBDCPol differently based on the card type. Now it should work properly for both the kworld and geniatech cards. 2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command (the cx88-dvb level handles the actual voltage on/off, but it still passes the ioctl down to the cx24123 level, which previously rejected the OFF as invalid so the ioctl would report failure) Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Yeasah Pell <yeasah@schwide.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4439): Whitespace cleanups for cx88-dvb and saa7134-dvbMichael Krufky
This patch cleans up some whitespace problems after the dvb_attach changes in cx88-dvb.c and saa7134-dvb.c, and converts some capitalized i2c address constants to lowercase. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4438): Fix dvb_pll_attach for nxt2004-based cardsMichael Krufky
The test in dvb-pll to see if a tuner's PLL responds when attaching fails on NXT2004 based boards before the firmware is loaded. This patch allows us to avoid this test by not passing an I2C bus handle to the dvb_pll_attach routine, just as Chris Pascoe has done for MT352 and ZL10353 based boards when used in cx88-dvb. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4436): Dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4388): Remove frontend selection from cx88/saa7134 driversAndrew de Quincey
Replaced with dvb_attach() Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4387): Add Kconfig infrastructure for dvb_attachAndrew de Quincey
Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4362): Cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV ↵David Bussenschutt
Tuner card support Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: David Bussenschutt <buzz@oska.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4361): Cx88: add support for Norwood PCI TV Tuner (non-pro)Peter Naulls
This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: Peter Naulls <peter@chocky.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4360): Cx88: add autodetection support for AverMedia M150-DMichael Krufky
This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4359): Cx88: add initial support for Hauppauge HVR3000 trimode cardEric Thomas
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: Eric Thomas <ethomas@claranet.fr> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4339): Removed the remaining config.h stuffMauro Carvalho Chehab
Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey
Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4399): Fix a typo that caused some compat stuff to not workMauro Carvalho Chehab
Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4365): OVERLAY flag were enabled by mistakeMauro Carvalho Chehab
A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video, together with several cx88-blackbird cleanups. This makes the cx88 driver to report: /dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument instead of: /dev/video0 [v4l2]: no overlay support Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4343): Fix for compilation without V4L1 or V4L1_COMPATMauro Carvalho Chehab
Removed usage of HAVE_V4L1 Including videodev.h will just include videodev2.h if V4L1 is not supported V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4313): Bugfix for keycode calculation on NPG remotesRicardo Cerqueira
Fix keycode calculations (all codes for this remote were wrong due to a lost + sign) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-10[PATCH] release_firmware() fixesMagnus Damm
Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[PATCH] irq-flags: media: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103gSaqeb Akhter
This patch adds support for the Geniatech Digistar, aka Digiwave 103g DVB-S card. Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Saqeb Akhter <johoja@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4267): Remove all instances of request_module("tda9887")Michael Krufky
We should no longer try to load the tda9887 module, because it no longer exists. The tda9887 driver has been merged into the tuner module. This patch removes all instances of request_module("tda9887") from the following video4linux drivers: bttv, cx88, em28xx and saa7134. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4264): Cx88-blackbird: implement VIDIOC_QUERYCTRL and VIDIOC_QUERYMENUMichael Krufky
This patch implements the newer v4l2 control features to make the standard user controls and mpeg encoder controls of cx88-blackbird video encoder boards available to userspace. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-29Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-27[PATCH] 64bit resource: fix up printks for resources in video driversGreg Kroah-Hartman
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27V4L/DVB (4259): Pass an explicit log prefix to cx2341x_log_statusHans Verkuil
A card number is not unique enough. Instead, let the caller specify the prefix of the status messages. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 13:20:08 +0000