aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/gspca/sonixb.c
AgeCommit message (Collapse)Author
2008-09-04V4L/DVB (8874): gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's.Hans de Goede
- Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is the same change as done for the other initdata tables in a previous patch. - Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102 drivers are both enabled. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8870): gspca: Fix dark room problem with sonixb.Hans de Goede
When using the sonixb driver in a dark room and given that the autoexposure algorithm starts with a setting most suitable for daylight, the picture produced by the cam may actually be 100% black leading to a avg_lum value of 0, so an avg_lum value of 0 does not always signal an exposure settings change (which it normally does). This patch adds a check for the really black image case and stops dropping all frames as invalid in this case. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8869): gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 ↵Hans de Goede
to gspca. This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca). It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8868): gspca: Support for vga modes with sif sensors in sonixb.Hans de Goede
- Add documentation for some known registers - Add support for vga modes (320x240, 160x120) for sif sensors - Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge only thing and keeping the flag was becoming awkward. - Fixup ov6650 and pas106 auto exposure window settings Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8835): gspca: Same pixfmt as the sn9c102 driver and raw Bayer added ↵Hans de Goede
in sonixb. 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8834): gspca: Have a bigger buffer for sn9c10x compressed images.Hans de Goede
Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8833): gspca: Cleanup the sonixb code.Hans de Goede
-the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8831): gspca: Resolve webcam conflicts between some drivers.Hans de Goede
-remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8830): gspca: Move some probe code to the new init function.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8829): gspca: Have a clean kmalloc-ated buffer for USB exchanges.Jean-Francois Moine
The USB buffer may be used for DMA and there may be a caching problem if the buffer is part of the device structure. Thanks to Alan Stern. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8822): gspca: Change some subdriver functions for suspend/resume.Jean-Francois Moine
- new function 'init' called on probe and resume - remove the functions 'open' and 'closed' - 'stopN' and 'stop0' are optional Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8817): gspca: LED and proble changes in sonixb.Hans de Goede
- turn the led of the cam off after plugging in the cam - move the probe code from open to config, so that if the probe fails we never register Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8816): gspca: Set disabled ctrls and fix a register pb with ovxxxx ↵Hans de Goede
in sonixb. - set some controls as disabled instead of copying the device descr. - in the ov6650 / 7650 exposure code clamp reg 11 before (instead of after) using it to calculate reg 10. - disable brightness (instead of ignoring it) for the TAS5110. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8718): gspca: suspend/resume added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-08-06V4L/DVB (8571): gspca: Don't use CONFIG_VIDEO_ADV_DEBUG as a compile option.Jean-Francois Moine
This option is changed to GSPCA_DEBUG and it is set by default in gspca.h. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27V4L/DVB (8521): gspca: Webcams with Sonix bridge and sensor ov7630 are VGA.Jean-Francois Moine
This fixes a bug introduced in c503a6f8332a (thanks to Hans de Goede). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27V4L/DVB (8519): gspca: Set the specific per webcam information in ↵Jean-Francois Moine
driver_info for sonixb. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8458): gspca_sonixb remove one more no longer needed special case ↵Hans de Goede
from the code gspca_sonixb remove one more no longer needed special case from the code Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8457): gspca_sonixb remove some no longer needed sn9c103+ov7630 ↵Andoni Zubimendi
special cases gspca_sonixb remove some no longer needed sn9c103+ov7630 special cases Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8456): gspca_sonixb remove non working ovXXXX contrast, hue and ↵Hans de Goede
saturation ctrls gspca_sonixb remove non working ovXXXX contrast, hue and saturation ctrls Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8455): gspca_sonixb sn9c103 + ov7630 autoexposure and cleanupHans de Goede
Andoni Zubimendi has been doing some testing with his sn9c103 cam with ov7630 sensor, and with this patch the exposure setting and autoexposure now work. This patch also removes some special cases in the shared ov6650 / ov7630 code which now are handled the same for both sensors and it adds a new special case which stops us from changing the hsync / vsync polarity settings from their default on the ov7630 (which we were doing as a side-effect of using the ov6650 exposure code for the ov7630). Last this patch removes the superficial difference between the OV7630 and OV7630_3 sensors. Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23V4L/DVB (8442): gspca: Remove the version from the subdrivers.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver.Hans de Goede
The sn9c102 driver claims to support usb-ID 0x0c45:0x6011, which is a sn9c102 with ov6650 sensor, but the sn9c102 driver does not support the ov6650 sensor (tested). Also the sn9c102 driver claims to support usb-ID 0x0c45:0x603f, which is a sn9c102 with CISVF10 sensor, but the sn9c102 driver does not support the CISVF10 sensor (not tested). Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8373): gspca: Hue, saturation and contrast controls added for ↵Hans de Goede
sn9c10x ovxxxx. (does not work with ov6650) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8372): gspca: Small ov6650 fixes.Hans de Goede
1) Don't change the red and blue pre-gain's from their defaults 2) Actually make the powerline freq ctrl available to userspace Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8370): gspca: Webcam 0461:0821 added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8369): gspca: Bad initialization of sn9c102 ov7630.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8367): gspca: Light frequency filter / exposure / clean-up for ↵Andoni Zubimendi
sn9c103 ov7630. Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8366): gspca: Better code for ov6650 and ov7630.Hans de Goede
sonixb: Common code between ov6650 and ov7630. Fix brightness oscillation with ov6650 sensor. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8364): gspca: Support of powerline frequency for ov6650.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8362): gspca: Bad offset of the brightness sum in sn9c103 packets.Hans de Goede
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8361): gspca: Bad check of i2c write to sn9c10x.Andoni Zubimendi
Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8360): gspca: Bad initialization of sn9c103 - ov7630.Andoni Zubimendi
Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8357): gspca: Perfect exposure for sn9c10x, sensor ov6650.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8356): gspca: 352x288 mode fix and source clean-up for Sonix bridges.Hans de Goede
sonixb: Bad initialization of sensor for 352x288 mode. (from Hans de Goede) sonixj: Clean-up source. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8354): gspca: Better gain for bridge sn9c10x - sensor ov6650.Hans de Goede
sonixb: Better gain for ov6650. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8353): gspca: 640x480 for bridge sn9c103 / sensor ov7630.Andoni Zubimendi
sonixb: 640x480 mode for sn9c103 - ov7630. Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8352): gspca: Buffers for USB exchanges cannot be in the stack.Jean-Francois Moine
gspca: Protect dq_callback() against simultaneous USB exchanges. Temporary buffer for USB exchanges added in the device struct. (all) Use a temporary buffer for all USB exchanges. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8349): gspca: SN9C103 OV7630 fixes in sonixb.Andoni Zubimendi
Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8348): gspca: Add auto gain/exposure to sonixb and tas5110 / ov6650 ↵Hans de Goede
sensors. sonixb: Do auto gain for tas5110 / ov6650 sensors. pac207: Move the auto_gain function to gspca. gspca: New function gspca_auto_gain_n_exposure(). Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8231): gspca: Do not declare the webcams declared by other drivers.Jean-Francois Moine
etoms: Do not declare the webcams declared by the driver et61x251. sonixb, sonixj: Do not declare the webcams declared by the driver sn9c102. zc3xx: Do not declare the webcams declared by the driver zc0301. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8205): gspca: Size of frame header adjusted according to sn9c10x in ↵Andoni Zubimendi
sonixb. Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8201): gspca: v4l2_pix_format in each subdriver.Jean-Francois Moine
main: Parameter comp_fac removed. main, pac207: get_buff_size op removed. (all) v4l2_pix_format in each subdriver. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8193): gspca: Input buffer may be changed on reg write.Jean-Francois Moine
Done for conex, etoms, pac7311, sonixj, t613 and tv8532. Code cleanup for some other subdrivers. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8192): Try to fix a reg_w() bugHans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8180): Source cleanup - compile error with VIDEO_ADV_DEBUG.Jean-Francois Moine
main, etoms, mars, pac207, pac7311, sonixb, sonixj, spca500, spca505: Cleanup source. sunplus: Compilation error when VIDEO_ADV_DEBUG set. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8157): gspca: all subdriversJean-Francois Moine
- remaning subdrivers added - remove the decoding helper and some specific frame decodings Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 03:52:09 +0000