aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/gspca
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13303): gspca - sonixj: Change sensor and om6802 exchanges.Jean-Francois Moine
- the sensors are now initialized sooner - om6802: . set some parameters in factory mode . lack of some parameters . gpio adjustments Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13302): gspca - sonixj: Fix some bad values of sensor om6802.Jean-Francois Moine
- sensor address is 0x34 - sensor i2c is 100 kHz Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13301): gspca - sonixj: Simplify the sensor init exchanges.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13300): gspca - pac7302/pac7311: Separate the two subdrivers.Marton Nemeth
All PAC7311 specific functions remain in pac7311.c. All PAC7302 specific functions are moved to pac7302.c. The USB device table is also divided into two parts. This makes it possible to remove the sensor specific decisions from different functions and also remove sensor infromation from the USB device table. The common functions are just copied to both subdrivers. These common functions can be separated later to a common file or helper module. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13299): gspca - pac7311: Extract pac_start_frame.Marton Nemeth
Creating the start of the frame is done in the same way for pac7302 and for pac7311. Extract this common part to the pac_start_frame() function. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13298): gspca - pac207/pac7311/mr97310a: Simplify pac_find_sof.Marton Nemeth
Remove struct sd dependency from pac_find_sof() function implementation. This step prepares separation of pac7302 and pac7311 specific parts of struct sd. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13267): gspca_mr97310a: Change brightness for VGA type 1 cameras ↵Theodore Kilgore
downward gspca_mr97310a: Change brightness for VGA type 1 cameras downward Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13266): gspca_mr97310a: Fix / update some commentsTheodore Kilgore
gspca_mr97310a: Fix / update some comments Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13265): gspca_mr97310a: Partly back off red gain change for Sakar ↵Theodore Kilgore
Digital VGA camera gspca_mr97310a: Partly back off red gain change for Sakar Digital VGA camera Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13251): gspca - sonixj: Cleanup code and change some comments.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13250): gspca - zc3xx: Add some delays and warn on i2c errors.Jean-Francois Moine
This patch fixes the kernel bug 14195 (random errors - bad images - with the webcam 10fd:8050 - sensor tas5130cxx). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13249): gspca - pac7311: Webcam 093a:2628 added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13245): gspca_mr97310a: Change blue gain setting for Sakar Digital ↵Theodore Kilgore
VGA camera gspca_mr97310a: Change blue gain setting for Sakar Digital VGA camera Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13244): gspca_mr97310a: Fix / update some commentsTheodore Kilgore
gspca_mr97310a: Fix / update some comments Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13243): gscpa_mr97310a: Add Trust Spyc@m 100 USB IDAurelien Jacobs
gscpa_mr97310a: Add Trust Spyc@m 100 USB ID Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13242): gspca_mr97310a: Add minimum clock divider controlHans de Goede
When "shooting" certain (quite rare) scenes, the mr97310's compression is not effective and it cannot keep up with the data stream. This patch adds a minimum clock divider control, which influences the maximum framerate, libv4l will automatically increase this minimum clockdiv control when it detect the cam cannot keep up. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13198): gspca - ov519: Bad frame pointer in ovfx2 packet scan.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13197): gspca - sonixj: Adjust colors and autogain for sensor om6802.Amauri Magagna
- set correct colors at startup time - autogain was too slow (4-5 mn - now 15-30 s)) Signed-off-by: Amauri Magagna <amaurimagagna@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13196): gspca - gl860: add flip/mirror for OV2640Olivier Lorin
- add flip/mirror support for OV2640 - fix for backlight value range - fix for red-blue inversion hue mode with V4L1 applications Signed-off-by: Olivier Lorin <o.lorin@laposte.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13195): gspca - gl860: comment changes and naming scheme egalizationOlivier Lorin
- small changes in comments - unified naming scheme for subdriver variables Signed-off-by: Olivier Lorin <o.lorin@laposte.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13194): gspca - gl860: improvement of the main driver partOlivier Lorin
- fix for warning compilation about sd_ctrls - trace improvement while probing the sensor Signed-off-by: Olivier Lorin <o.lorin@laposte.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13193): gspca - zc3xx.c: Change init sequences of sensor tas5130c.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13192): gspca - pac_common: redesign function for finding Start Of ↵Marton Nemeth
Frame The original implementation of pac_find_sof() does not always find the Start Of Frame (SOF) marker. Replace it with a state machine based design. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13185): gspca: Don't resubmit error status URB's when suspendingHans de Goede
gspca: Don't resubmit error status URB's when suspending Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13184): gspca: Don't forget to resubmit URB's in case of an errorHans de Goede
The gscpa core was not resubmitting URB's when the URB status was an error, this means we will loose URB's (potentially all stopping the stream) in case of sporadic USB issues. I've seen this with an Aiptek stv0680 based PenCam connected through an USB 2.0 hub. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13183): gspca: add stv0680 subdriverHans de Goede
This patch adds a new subdriver to gspca supporting cams with the stv0680 bridge (replacing the old in kernel v4l1 driver). Many thanks to Hans Verkuil for providing me with one of the 2 cams used in testing this new sub driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13182): gspca w9968cf: slight tweak to vstart and hstartHans de Goede
gspca w9968cf: slight tweak to vstart and hstart to get rid of black borders in 640x480 mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13181): gspca w9968cf: Add support for JPEG compressionHans de Goede
gspca w9968cf: Add support for JPEG compression, this enables much higher framerates at 320x240 / 352x288 and also allows for 640x480 mode for cams which can do this. The w9968cf uses planar JPEG, which libv4l until now did not support, so this requires atleast version 0.6.3 of libv4l. And something important I forgot to mention in my earlier w9968cf commits: Many thanks to Hans Verkuil for giving me a w9968cf based cam, which has allowed me to develop the gspca w9968cf support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13180): gspca-w9968cf: Don't add an extra packet to the buffer ↵Hans de Goede
after the EOF gspca-w9968cf: Don't add an extra packet to the buffer after the EOF, this makes the frame data size bigger then it should be which makes gstreamer discard it. This patch also fixes an unrelated compiler warning. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13179): gspca_ov519: cache sensor regs to avoid unnecessary slow ↵Hans de Goede
i2c reads / writes Cache sensor regs to avoid unnecessary slow i2c reads / writes, this speeds up sd_start a bit with most bridges and a lot (from 5 seconds down to 0.3 seconds) with W996xCF cams, as this avoids very slow bit bang IO over USB i2c reads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13178): gspca: Add support for Winbond W9967CF and W9968CF camera'sHans de Goede
This patch adds support to gspca for the Winbond W9967CF and W9968CF camera's. This is mostly a port of the existing v4l1 driver to gspca (making it v4l2). But this also features fixes to the bitbanging i2c code (send a nack not an ack after reading the last byte of a transfer), which gets rid of the weird errors which were being seen there, and of the smbus_refresh() hack to get around these errors. Also the vstart settings have been tweaked to work with different frequency filter settings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13146): gspca_ov519: cleanup sensor handlingHans de Goede
There were various "if (sensor == foo)" pieces of code inside ov519.c, move these bits to the sensor specific init functions, where they belong. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13145): gscpa_ov519: add support for the ovfx2 bridgeHans de Goede
gscpa_ov519: add support for the ovfx2 bridge Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13144): gspca_ov519: Add support for OV2610 and OV3610 sensorsHans de Goede
This patch adds support for the OV2610 and OV3610 sensors to the gspca ov519 subdriver. This is a preparation patch for adding ovfx2 bridge support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13143): gspca_ov519 cleanup sensor detectionHans de Goede
gspca_ov519 cleanup sensor detection Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13142): gspca_mr97310a: small tweak to CIF sensor type 1 exposure ↵Hans de Goede
setting The CIF sensor type 1 exposure setting got clamped at 300, as settings below 300 do not work well (and do work for the other sensors). This patch scales the 0-4095 range to 300-4095 instead of ignoring changes between 300, avoiding have a part of the control range where nothing happens. This is esp. important for software autogain as done by libv4l. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13141): gspca_sq905c: once one frame is discarded it keeps ↵Hans de Goede
discarding all frames While checking all gspca sub drivers pkt_scan functions for a bug I found in 1 of them (and after checking also in another), I noticed a bug in the gspca_sq905c work queue function, once it has decided to start discarding a frame because the application is not reading fast enough (and thus returning buffers to fill fast enough), it never stops discarding. This patch fixes this by simply completely removing the "discarding" variable, if we need to discard the current frame because there is no buffer to store it, the "frame" pointer will be NULL, so that is all we need to check. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13140): gspca_jeilinj: once one frame is discarded it keeps ↵Hans de Goede
discarding all frames While checking all gspca sub drivers pkt_scan functions for a bug I found in 1 of them (and after checking also in another), I noticed a bug in the gspca_jeilinj work queue function, once it has decided to start discard a frame because the application is not reading fast enough (and thus returning buffers to fill fast enough), it never stops discarding. This patch fixes this by simply completely removing the "discarding" variable, if we need to discard the current frame because there is no buffer to store it, the "frame" pointer will be NULL, so that is all we need to check. I've also moved the gspca_get_i_frame() call and the writing of the jpg header to the buffer to after the first usb_bulk_msg() call, as we don't need it before that, and that will give the app slightly more time to queue a buffer for us to fill. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13139): gspca_mr97310a: Improve VGA sensor type detectionTheodore Kilgore
Improve (and also simplify :) gspca_mr97310a: VGA sensor type detection. As it was still failing on some machines (not with some cams, but on some machines interesting enough). Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13138): gspca_sq905: cleanup sq905_dostreamHans de Goede
-Remove use of unneeded discarding variable -Cleanup locking to only take usb_lock around access to the control endpoint, by no longer taking the lock around the bulk transfer (which takes most of the time) we can remove the msleep(1) which was needed to give the gspca core a chance to grab the usb_lock to signal us to stop. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13137): gspca_mr97310a: Add controls for vga cams with sensor type 0Theodore Kilgore
This patch adds controls for vga cams with sensor type 0, in order to correctly report the present controls, the probing of the sensor type has been moved from sd_start to sd_config, since this made the sensor type probing unreliable the detection method was changed. Note this requires the camera to enter streaming mode, so sd_config now briefly makes the camera stream. Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13121): gspca - pac7311: add comment about JPEG headerMarton Nemeth
Add comment about the meaning of the fixed JPEG header bytes used to create each image. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13120): gspca - pac7311: remove redundant register page switchingMarton Nemeth
Remove redundant register page switching to page 0 when changing the color control. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13119): gspca - pac7311: remove magic value for USB_BUF_SZMarton Nemeth
The length check in reg_w_var() function is because the buffer contents is copied to gspca_dev->usb_buf which has the size of USB_BUF_SZ bytes as defined in drivers/media/video/gspca/gspca.h. Replace the number with symbol for better readability and maintainability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13118): gspca - pac7311: remove magic values for END_OF_SEQUENCE ↵Marton Nemeth
and LOAD_PAGE. Change the magic values 0, 254 and 255 to END_OF_SEQUENCE, LOAD_PAGE4 and LOAD_PAGE3 respectively for better source code readability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13117): gspca - pac7311: remove magic value for SKIP.Marton Nemeth
Change the magic value 0xaa to SKIP for better understandability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13116): gspca - ov519: Webcam 041e:4067 added.Rafal Milecki
Signed-off-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13115): gspca - main: More information messages.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13114): gspca - zc3xx.c: Bad init sequences of sensor cs2102.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-11-07V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 camsTheodore Kilgore
gspca_mr97310a: Change vstart for CIF sensor type 1 cams This fixes the distortion at the end of the frame, and avoids the bad frame dropping done because of this distortion, trippling the framerate! Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-08 04:25:39 +0000