aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/ir-kbd-i2c.c
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (10939): ir-kbd-i2c: Prevent general protection fault on rmmodJean Delvare
The removal of the timer which polls the infrared input is racy. Replacing the timer with a delayed work solves the problem. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10632): Added support for AVerMedia Cardbus Hybrid remote controlOldřich Jedlička
Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b that provides remote control key reading support for AVerMedia Cardbus Hybrid card, possibly for other AVerMedia Cardbus cards. The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was disabled. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), ↵Kay Sievers
dev_set_name() This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9168): Add support for MSI TV@nywhere Plus remoteBrian Rogers
The IR controller has a couple quirks. It won't respond until some other device on the bus is probed. To work around that, probe 0x50 first. Then, since it won't respond to a zero-byte read, probe with a one-byte read. Signed-off-by: Brian Rogers <brian_rogers@comcast.net> [mchehab.redhat.com: Fix merge conflicts and remove an unused var] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9016): HVR3000/4000 Hauppauge related IR cleanupsDarron Broad
From the author: This patch-set fixes remote control issues I have experienced with hauppauge drivers in Linux since the PVR-350 and now with both a NOVA-S+ and HVR-4000. It has also been confirmed to work with an HVR-1300 user who had exactly the same issue. Hauppage remote controls use RC5. RC5 has a bit-field which represents the target device. The hauppauge windows drivers have a registry key which can enable filtering, but the linux drivers will accept any target device in this bit field for internal processing. This causes problems with setups such as mythtv where remote control key presses destined for the TV (target = 0) are interpreted by the kernel and subsequenctly LIRC then mythtv. Of the remote controls I have to hand (wintv black, pvr/hvr silver) the hauppauge remotes send one of two device targets ids, these are interpreted by the patch which then filters out any non hauppauge addresses. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-20V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2cMauro Carvalho Chehab
Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is defined there. However, as this symbol is used only on saa7134, there's no sense on keeping it defined there (or on ir-commons). So, let's move it to saa7134 and remove one symbol for being exported. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26V4L/DVB (7751): ir-kbd-i2c: Save a temporary memory allocation in ir_probeJean Delvare
Using i2c_transfer instead of i2c_master_recv in ir_probe saves a temporary memory allocation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7518): media/video/ replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7332): ir-kbd-i2c: Minor optimization in ir_probeJean Delvare
This saves an initialization and a comparison. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7286): limit stack usage of ir-kbd-i2c.cMarcin Slusarz
ir_probe allocated struct i2c_client on stack; it's pretty big structure, so allocate it with kzalloc make checkstack output without this patch: x059d ir_probe [ir-kbd-i2c]: 1000 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7094): static memoryDouglas Schilling Landgraf
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-01-25V4L/DVB (6973): Add Beholder TV 401/405/407/409/505/507/609/M6 supportAndrey J. Melnikoff (TEMHOTA)
This patch updates cardlist for Beholder TV tuners: old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507 and add support for 607, 609, M6 cards with new i2c-ir. Signed-off-by: Igor Kuznetsov <igk72@yandex.ru> Signed-off-by: Andrey J. Melnikov <temnota@kmv.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6352): ir-kbd-i2c: Missing break statementTrent Piepho
Someone added a new case without adding a break to the one before it. Thanks to Margus <b-berski at mbox200 dot swipnet dot se> for spotting this. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6196): cx23885: add support for DViCO FusionHDTV 5 ExpressMichael Krufky
This patch adds digital ATSC / QAM support for the DViCO FusionHDTV5 Express. Remote control is supported by ir-kbd-i2c, RTC is supported by rtc-isl1208. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6179): Clean up FusionHDTV ir codeMichael Krufky
- fixed missing buttons in keymap. - make function names & descriptions more generic, since this same ir receiver and remote is used in many FusionHDTV products. - miscellaneous cleanups. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6178): add IR remote support for FusionHDTV 5 RT GoldChaogui Zhang
This patch adds support for the built-in IR receiver of the DViCO Fusion HDTV5 RT GOLD PCI card, using FusionHDTV MCE remote controller. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6079): Cleanup: remove linux/moduleparam.h from drivers/media filesMauro Carvalho Chehab
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5786): Ir-kbd-i2c: add support for Hauppauge HVR1300 remoteJan Frey
- add support for the I2C based IR transceiver of the Hauppauge HVR-1300 - remove bad code from cx88-input.c Signed-off-by: Jan Frey <jfrey@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5684): V4L: ir-kbd-i2c - switch to using msecs_to_jiffies()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5479): Use ARRAY_SIZE instead of a magic numberMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-10V4L/DVB (4898): Saa7134: add support for remote control of Hauppauge HVR1110Thomas Genty
This patch adds support for the remote control bundled with the Hauppauge HVR1110 Signed-off-by: Thomas Genty <tomlohave@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4854): Handle errors from input_register_device()Dmitry Torokhov
Also sprinkled some input_sync() throughout the code. Acked-by: Ricardo Cerqueira <v4l@cerqueira.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-03V4L/DVB (4670): Allow RC5 codes 64 - 127 in ir-kbd-i2c.cDavid Hardeman
The RC5 coding has for a long time supported commands 64-127 in addition to 0-63. This is controlled by the second bit of the RC5 packet (see The attached patch modifies ir-kbd-i2c.c to allow for commands 64-127, tested with a PVR350 card in combination with a programmable remote. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4023): Subject: Pinnacle PCTV grey remote control supportSylvain Pasche
This adds support for the older (?) Pinnacle PCTV remotes (with all buttons colored in grey). There's no autodetection for the type of remote, though; saa7134 defaults to the colored one, to use the grey remote the "pinnacle_remote=1" option must be passed to the saa7134 module Signed-off-by: Sylvain Pasche <sylvain.pasche@gmail.com> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-02V4L/DVB (3696): Previous change for cx2341X boards broke the remote supportHans Verkuil
Partially revert previous change to fix IR support. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-02V4L/DVB (3605): Add support for I2C_HW_B_CX2341X board adapterHans Verkuil
- Add missing class check to tveeprom_attach_adapter. - Add CX2341X specific IR probe address list. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3393): Move all IR keymaps to ir-common moduleRicardo Cerqueira
- All the keymaps have the same structure, and can be shared between different chips, so it makes no sense having them scattered between the input files. This aggregates them all at ir-common module. - Added new Hauppauge remote (Hauppauge grey), contributed by J.O. Aho <trizt@iname.com> (with some small changes) Changed KEY_KPx (keypad numerals) references to KEY_x, to avoid problems when NumLock is off (suggested by Peter Missel <peter.missel@onlinehome.de>) - Some cleanups at IR code Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3395): Hauppauge Grey Remote supportJ.O. Aho
- For the Hauppauge PVR cards there are at least two different remotes, one completly black and one that is Grey and black, they keys differ in values eg Black remotes 'mute' has the same value as Grey remotes 'menu'. - This enables the user to select which keymapping to use by using the hauppauge parm. Unlike to the black remote keys, all keys are mapped for the grey remote and the ATi usb remote mappings has been followed. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3307): Some cleanups at I2C modulesMauro Carvalho Chehab
- i2c names shorten - removed obsoleted flags on newer modules - small cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3123b): syncs V4L subsystem tree with kernelMauro Carvalho Chehab
- This patch makes kernel in sync with v4l subsystem tree. - some lines reordered to be sync. - some reduntant codes removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-05[PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman
Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
2006-01-05[PATCH] i2c: Drop i2c_driver.{owner,name}, 5 of 11Laurent Riffard
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the drivers/media/video and usb/media drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05[PATCH] i2c: Drop i2c_driver.flags, 2 of 3Jean Delvare
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-12[PATCH] V4L/DVB: (3151) I2C ID renamed to I2C_DRIVERID_INFRAREDMauro Carvalho Chehab
I2C ID renamed to I2C_DRIVERID_INFRARED Acked-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 4Mauro Carvalho Chehab
Clean up whitespaces at v4l/dvb files Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 3Mauro Carvalho Chehab
Clean up whitespaces at v4l/dvb files Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-01[PATCH] V4L: Some funcions now static and I2C hw code for IRMauro Carvalho Chehab
- Some funcions are now declared as static - Added a I2C code for InfraRed. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] v4l: (935) Moved common IR stuff to ir-common.cRicardo Cerqueira
- The pinnacle handler & remote are common to saa7134 PCI boards and em28xx USB boards, so the keymap was moved to ir-common and the keyhandler is back to ir-kbd-i2c - request_module("ir-kbd-i2c") is no longer necessary at saa7134-core since saa7134.ko now depends on ir-kbd-i2c.ko to get the keyhandler Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 898: em2820 i2c fixMauro Carvalho Chehab
- Miscelaneous fixes for em28xx - I2C hardware named changed to wright value. - utsname included to em28xx-video.c - Makefile fixes. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 817: saa713x keymaps and key builders were moved from ir kbd i2c cRicardo Cerqueira
- SAA713x keymaps and key builders were moved from ir-kbd-i2c.c Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 812: supports the pinnacle pctv 110i board video inputs and remoteRicardo Cerqueira
- Supports the Pinnacle PCTV 110i board, video inputs, and remote. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 800: whitespace cleanupsMauro Carvalho Chehab
- Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 791: codingstyle fixesMauro Carvalho Chehab
- CodingStyle fixes Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 790: added support for terratec cinergy 250 usbMarkus Rechberger
- Added support for Terratec Cinergy 250 USB Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 784: several improvement on i2c ir handling for em2820Mauro Carvalho Chehab
- Several Improvement on I2C IR handling for em2820: - moved Pinnacle IR table (ir_codes_em2820) to em2820-input.c - IR struct renamed and moved to a header file. - New file to handle em2820-specific IR. - Some cleanups. - attach now detects I2C IR and calls em2820-specific IR code - IR compat code moved to compat.h - New header with struct IR_i2c there, to allow it to be used by board-specific input handlers. - Some improvements at em28xx board detection: - Board detection message improved to show interface and class. - Now it doesn't touch audio interfaces. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 783: fixed bad em2820 remote layout valuesMarkus Rechberger
- Fixed bad em2820 remote layout values - set KNC One and Purple TV layouts back to default - added pinnacle ir remote i2c address to the i2c scanner Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 782: ir-kbd-i2c.c updatesMarkus Rechberger
- fixed probe function - em2820 remote layout - disabled em2820 pinnacle ir support - whitespace cleanups Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 23:18:24 +0000