aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/ivtv/ivtv-driver.c
AgeCommit message (Collapse)Author
2010-02-26V4L/DVB: ivtv: Add initial entry for Sony VAIO Giga Pocket (Kikyou) cardsEric Anderson
This is a slightly modified version of Eric Anderson's original patch for the Sony Giga Pocket board. It has been updated to apply to the latest ivtv driver version by Hans Verkuil <hverkuil@xs4all.nl> and Andy Walls <awalls@radix.net>. Also Andy Walls modified the patch to use a new Sony BTF-Pnx01Z tuner entry based on Eric Anderson's experimental findings for the bandswitch. >From Eric Anderson's original email: 1. The tuner on the card doesn't seem to match any standard ones. I modified an existing tuner entry. Ideally a new tuner entry should be created. (The only difference from the one I modified is that the low-to-mid range frequency cut-off is slightly different, as are the bit config settings.) 2. It wasn't obvious how to choose a second audio input other than using "radio" as an option. Basically there's two GPIO audio inputs. Using radio allowed me to avoid major restructuring to the code. (perhaps other cards don't have this often...) 3. It's not clear that there's a mute setting that works. Not sure why. 4. I haven't had a chance to test the two Svideo inputs. I set them to COMPOSITE1 and SVIDEO2, but I'm not sure those are the correct settings. The standard composite video inputs seem to work. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13446): ivtv: Add more explicit detection of known IR devices for ↵Andy Walls
Hauppauge cards Avoid legacy IR I2C probing for PVR-150, PVR-500, and PVR-350 cards. This still probes, but restricts the possbile addresses probed per card. Also removed legacy probe addresses for the KNC and PixelView cards which are not supported by ivtv as far as I know. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13443): ivtv: Defer legacy I2C IR probing until after setup of ↵Andy Walls
known I2C devices This avoids collisions of legacy IR controller probing with known I2C devices in the card definitions in ivtv-cards.c. I2C driver modules for device listed explicitly in a card definition should always take precedence over a probe guessing where and IR controller may be. Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13442): ivtv: Add module parameter to adjust I2C SCL clock period ↵Andy Walls
per board Add a module parameter to adjust I2C SCL clock period per board. This allows some experimental fine tuning by end users to overcome quirky I2C device problems. Reported-by: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13288): adding __init/__exit macros to various driversPeter Huewe
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following drivers in media video: drivers/media/video/ivtv/ivtv-driver.c drivers/media/video/cx18/cx18-driver.c drivers/media/video/davinci/dm355_ccdc.c drivers/media/video/davinci/dm644x_ccdc.c drivers/media/video/saa7164/saa7164-core.c drivers/media/video/saa7134/saa7134-core.c drivers/media/video/cx23885/cx23885-core.c Cc: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Andy Walls <awalls@radix.net> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12723): ivtv/cx18: replace 'kernel number' with 'device node number'.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12209): ivtv: Add card entry for AVerMedia UltraTV 1500 MCE (M113 ↵Andy Walls
variant) Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12198): ivtv-driver.c: Remove unnecessary semicolonsJoe Perches
Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11932): ivtv: Add missing newlineAndy Walls
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11672): ivtv: use v4l2_device_set_name.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11668): ivtv: fix compiler warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11377): v4l: increase version numbers of drivers converted to ↵Hans Verkuil
v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing ↵Hans Verkuil
core->init. The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10488): ivtv: cleanup naming conventionsHans Verkuil
Use consistent naming for pci_dev, v4l2_device and video_device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10229): ivtv: fix memory leakHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil
instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9835): ivtv/ivtvfb: convert to v4l2_device/v4l2_subdev.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9326): ivtv: avoid green flashing when loading ivtvMartin Dauskardt
When loading ivtv the TV-out of the PVR-350 will flash green since the saa712x is activated before the MPEG decoder has been initialized. Deactivate the saa712x until the MPEG decoder has been initialized. Signed-off-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9162): ivtv: fix raw/sliced VBI mixupHans Verkuil
The service_set field was used in saa7115 and cx25840 to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead these drivers should checked on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated ivtv accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9133): v4l: disconnect kernel number from minorHans Verkuil
The v4l core creates four different video devices (video, vbi, radio, vtx) and each has its own range of minor numbers. However, modern devices keep increasing the number of devices that they need so a maximum of 64 video devices will not be enough in the future. In addition this scheme makes it very hard to add new device types. This patch disconnects the kernel number allocation (e.g. video0, video1, etc.) from the actual minor number (just pick the first free minor). This allows for much more flexibility in the future. However, it does require the use of udev. For those who cannot use udev a new CONFIG option was created that changes the allocation scheme back to the old behavior. Thanks to Greg KH for suggesting this approach during the 2008 LPC. In addition, several bugs were fixed in the ivtv and cx18 drivers: these drivers try to allocate specific kernel numbers but that scheme contained a bug which caused what should have been e.g. video17 to appear as e.g. video2. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB: follow lspci device/vendor styleBjorn Helgaas
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8648): ivtv: improve CC supportHans Verkuil
- change the work-queue to a single threaded high prio workqueue - use DMA instead of PIO for the sliced VBI data. - remove some incorrect tests - increase the internal VBI capture queue size for sliced VBI packets - ignore duplicate VBI lines With these changes it should finally be possible to get reliable closed captions. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8479): tveeprom/ivtv: fix usage of has_ir fieldHans Verkuil
has_ir was set to and compared to -1 in several cases, even though it is an u32. ivtv also contained a FIXME for an old kernel that could be removed. Thanks to Roel Kluin for creating an initial patch for this. Although I chose a different solution here it did help in pointing out the problem. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8164): cx18/ivtv: choose a better initial TV standard for cards ↵Hans Verkuil
without eeprom. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8079): ivtv: Convert to video_ioctl2.Hans Verkuil
Based on an initial conversion patch from Douglas Landgraf. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7926): ivtv: add support for the Buffalo PC-MV5L/PCI card.Hans Verkuil
Thanks to Peter Brandt for doing the necessary tests to fill out the card definition! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7924): ivtv/cx18: snprintf fixesJean Delvare
snprinf() takes the trailing \0 into account in its length calculations, so there is no need to subtract 1 to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7854): cx18/ivtv: improve and fix out-of-memory handlingHans Verkuil
- don't show kernel backtrace when the allocation of the buffers fails: the normal ivtv/cx18 messages are clear enough and the backtrace scares users. - fix cleanup after the buffer allocation fails (caused kernel panic). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7853): ivtv/cx18: fix compile warningsHans Verkuil
Fix compile warnings if MODULE is not defined. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30V4L/DVB (7792): ivtv: correct misspelled "HIMEM4G" to "HIGHMEM4G" in error ↵Robert P. J. Day
message Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab
namespace for all of them.
2008-04-29V4L/DVB (7757): ivtv: add autodetect for the AVermedia M104 cardHans Verkuil
Note that this card is only detected and not yet working. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7755): ivtv: add support for card comments and detected but ↵Hans Verkuil
unsupported cards Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7754): ivtv: change initialization order to fix an oops when device ↵Hans Verkuil
registration failed Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7535): saa717x: add new audio/video decoder i2c driverHans Verkuil
Added the last remaining out-of-tree kernel driver from the ivtv project. The saa717x is used in several Japanese cards and a Russian card. The driver is not complete in that only NTSC is supported and no PAL/SECAM. Hopefully this will be added in the future. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7341): ivtv: rename tunerhz to tunertypeHans Verkuil
There are two tuner types: those for M/N standards and those for all others. However, M/N standards are not always 60 Hz (PAL-N/Nc are 50 Hz), so rename the module option accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7340): ivtv: fix tunerhz bug: PAL-N(c) is 50 Hz, not 60Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7338): ivtv: improve pal/secam module options, add tunerhz module ↵Hans Verkuil
option Allow options like pal=bgh, improve description of those options. Add tunerhz option: 50=card has 50Hz tuner, 60=card has 60Hz tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7243): ivtv: yuv framebuffer trackingIan Armstrong
The existing yuv code limits output to the display area occupied by the framebuffer. This patch allows the yuv output to be 'detached' via V4L2_FBUF_FLAG_OVERLAY. By default, the yuv output window will be restricted to the framebuffer dimensions and the output position is relative to the top left corner of the framebuffer. This matches the behaviour of previous versions. If V4L2_FBUF_FLAG_OVERLAY is cleared, the yuv output will no longer be linked to the framebuffer. The maximum dimensions are either 720x576 or 720x480 depending on the current broadcast standard, with the output position relative to the top left corner of the display. The framebuffer itself can be resized, moved and panned without affecting the yuv output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7094): static memoryDouglas Schilling Landgraf
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-20V4L/DVB (7279): ivtv: Add missing sg_init_table()Ian Armstrong
If a dma transfer is attempted for either yuv or framebuffer output, a missing sg_init_table() call causes a kernel BUG in scatterlist.h if CONFIG_DEBUG_SG is set. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-20V4L/DVB (7242): ivtv: fix for yuv filter table checkIan Armstrong
As the result of a previous change that delayed the loading of the firmware, the driver can sometimes report a bogus error regarding the yuv output filter table not being found in the firmware. This patch moves the filter table check to ensure it's only done after the firmware has been loaded. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6917): ivtv: small textual updateHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6896): ivtv: add XC2028 support for Club3D cardsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6776): ivtv: Some general fixesRichard Knutsson
Fix "warning: Using plain integer as NULL pointer". Convert 'x < y ? x : y' to use min() instead. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6765): ivtv: convert to bus-based i2c APIHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6763): ivtv: add AVerMedia EZMaker PCI Deluxe supportHans Verkuil
Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the ↵Ian Armstrong
IVTV_IOC_DMA_FRAME framework Previously, all yuv data written to /dev/video48 had only basic support with no double buffering to avoid display tearing. With this patch, yuv frames written to video48 are now handled by the existing IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to avoid tearing, and honour scaling mode & field order options. Unlike the proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the V4L2 API. Due to mpeg & yuv output restrictions being different, their V4L2 output controls have been separated. To control the yuv output, the V4L2 calls must be done via video48. If the ivtvfb module is loaded, there will be one side effect to this merge. The yuv output window will be constrained to the visible framebuffer area. In the event that a virtual framebuffer size is being used, the limit to the output size will be the virtual dimensions, but only the portion that falls within the currently visible area of the framebuffer will be shown. Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720 pixels wide. However the height must only be padded up the nearest multiple of 32. This would mean an image of 102 lines must be padded to 128. As long as the true source image size is given, the padding will not be visible in the final output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6713): ivtv: ivtv_yuv_prep_frame breakup and yuv hardware buffer ↵Ian Armstrong
changes ivtv_yuv_prep_frame is split in smaller code blocks. Modified yuv buffer handling on the PVR350 itself. We now cycle through all 8 hardware buffers. With this patch in place, driver behaviour should remain unchanged from the existing release. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-09 03:38:02 +0000