aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/saa7134
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6623): remove saa7134-ossAdrian Bunk
The saa7134-oss is deprecated for quite some time, it's the only remaining OSS user outside of sound/oss/, and considering how few and what kind of soundcards are left supported by OSS I hardly see any use cases left. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6620): kconfig: VIDEO_SAA7134 must select VIDEO_TVEEPROMMichael Krufky
The ability to read Hauppauge eeprom's was recently added to saa7134, so we must build the tveeprom module. Thanks to Matthias Schwarzott for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6617): drivers/media/video: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6607): saa7134: add support for reading Hauppauge eepromMichael Krufky
Increased size of dev->eedata from 128 to 256, since the Hauppauge data begins at byte 128. This has been tested on boards with smaller eeproms, and caused no problems. Added comments to distinguish between the various versions of the HVR1110. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6606): saa7134: add autodetection support for alternate subids of ↵Michael Krufky
Hauppauge HVR1110 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to ↵Brandon Philips
VIDEOBUF_ s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6399): saa7134/: make 2 functions staticAdrian Bunk
saa7134_buffer_requeue() and set_tvnorm() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6384): Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIGMauro Carvalho Chehab
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-17fix wrong sized spinlock flags argumentDaniel Walker
Correct wrong sized spinlock flags, form int to unsigned long. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-13V4L/DVB (6798): saa7134: enable LNA in analog mode for Hauppauge WinTV HVR-1110Michael Krufky
Thanks to Hermann Pitton for noticing that this was missing. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6746): saa7134-dvb: fix tuning for WinTV HVR-1110Benoit Istin
There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6690): saa7134: fix ignored interruptsHeikki Lindholm
The saa7134 video driver starts dropping frames when used together with the saa7134-alsa driver. Frames are dropped because when an audio event is waiting the driver simply ignores the interrupt and passes it on to the saa7134-alsa interrupt handler. The alsa interrupt handler in turn acknowledges all types of events thus clearing the pending video events as well. Fix by only masking out the audio event in the video interrupt handler and by only acknowledging the audio event in the alsa driver. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6686): saa7134: fix composite over s-video input on the Tevion MD 9717Hermann Pitton
The vmux for composite over s-video input was wrong. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6666): saa7134-alsa: fix period handlingHeikki Lindholm
The period handling in saa7134-alsa is broken in two ways. First, the minimum number of periods of two does not work, because the dma is setup two periods ahead in the irq handler. Fix the minimum to four periods. Second, the code assumes that the number of periods is divisible by two, which isn't always the case on ALSA. Fix by adding a constraint. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6602): V4L: Convert videobuf drivers to videobuf_stopBrandon Philips
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6506): saa7134-alsa: Fix mmap supportAlexander E. Patrakov
Trent Piepho wrote: > I do not think the saa7134-alsa driver supports mmap. The cx88-alsa driver > also claimed to support mmap, but it never worked until I fixed it. It's > pretty clear that the code in saa7134-alsa was based on the same code as > cx88-alsa, so it's likely it has the same bug. You are right. The patch below (based on your cx88 patch, but I don't really understand it) fixes mmap support in saa7134-alsa for me. Recording via mmap (arecord -M -f S16_LE -c 2 -r 32000 -D hw:1) didn't work at all before, works now, tested for at least 20 minutes (but, unfortunately, with one overrun at least 0.719 ms long). Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6479): use input functions, should depend on INPUTRandy Dunlap
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadrohermann pitton
saa7134: fix analog audio in on medion md8800 quadro, aka CTX944 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6382): saa7134: fix NULL dereference at suspend time for cards ↵Matthias Schwarzott
without IR receiver Calling saa7134_ir_stop at suspend is no good idea for saa7134 cards without remote control. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6379): patch which improves GotView Saa7135 remote controlPedro
improve GoTView PCI7135 remote control working under linux. Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Eugene M. Roginskii <roginovicci@nm.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6330): V4L: saa7134: Fix interaction between tvaudio thread and the ↵Maxim Levitsky
freezer make tvaudio thread freezeable, and add proper support for that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6329): Additional Fixes for saa7134 suspend/resumeMaxim Levitsky
Fixes few more problems I found in my saa7134 resume code: * Race between IRQ handler and .suspend()/.resume() functions * Removes timeout timers on active buffers - those buffers will be recaptured after resume * Adds suspend/resume for IR code - probably necessary if using polling mode * Adds #ifdef CONFIG_PM overs suspend code * Runs a quirk in set_tvnorm in suspend/resume too * Rearranges the order of calls in saa7134_resume to be exactly as in saa7134_initdev thus the card is initialized in exactly the same way * Since DMA audio capture suspend/resume isn't yet supported, avoid re-enabling it on resume for now Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6321): Remove obsolete VIDIOC_S/G_MPEGCOMP ioctlsHans Verkuil
Remove the obsolete VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP ioctls from the V4L2 API as per the removal schedule (October 2007). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6320): v4l core: remove the unused .hardware V4L1 fieldMauro Carvalho Chehab
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-13i2c: Remove NOP i2c_algorithm.algo_control() methodsDavid Brownell
This removes NOP implementations of i2c_algorithm.algo_control. With this change, there are no implementations of this hook in the kernel.org tree ... that hook seems about ripe to remove. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-10V4L/DVB (6314): saa7134: Replace list_for_each+list_entry with ↵Trent Piepho
list_for_each_entry A couple loops weren't changed because they expected the loop iterator to be left as NULL if the list was empty. Maybe the code should just check for that first, then loop? Adjust some of the loop logic to be simpler. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6306): Few clenups for saa7134 resume codeMaxim Levitsky
*Disable DMA explictly on suspend *Enable DMA on resume, after all buffers were configured *Disable overlay on resume - apps should enable it when X is resumed Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6295): saa7134: add autodetection for KWorld ATSC-115Eric Sandeen
Recognize the KWorld ATSC115 PCI ID as a hardware clone of the ATSC110. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6286): Add support for MSI TV @nywhere A/D NBMauro Carvalho Chehab
This is a Lifeview hybrid OEM board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6283): videobuf: Remove references to old Kconfig option nameTrent Piepho
CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB. But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver. The reference in cx23885.h should just be removed, as the code there needs to be included if DVB is on or off. I do not think you can even compile the cx23885 driver without DVB. It's clearly just leftover from when the file was obvious copied from the cx88 driver (which is not mentioned in the copyright BTW). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6272): V4L: properly fix support for capturing interlaced video in ↵Maxim Levitsky
saa7134 By "capturing interlaced video" I mean that card ensures that top field is really top and vice versa (I think it takes the filed ID from signal) Properly turn on/off that support depending on signal state Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6271): V4L: Add basic support for suspend/resume for saa7134Maxim Levitsky
This adds support for suspend/resume for core of saa7134 Should fix bug#7220 Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6270): V4L: Honor dev->ctl_invert when setting up the decoder in ↵Maxim Levitsky
saa7134 When user sets dev->ctl_invert, driver writes negative values to SAA7134_DEC_LUMA_CONTRAST and SAA7134_DEC_CHROMA_SATURATION, but general code that initializes decorder ignores that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6269): V4L: Fix a "scheduling while atomic" bug in saa7134Maxim Levitsky
set_tvnorm can sleep in saa7134_i2c_xfer (it will be called through tuner code) but code calls it under spinlock. Fix that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6260): Fix Kconfig dependencyMauro Carvalho Chehab
Thanks to Michael Krufky for pointing this to me. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with ↵Mauro Carvalho Chehab
the other patches Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6252): Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6225): AverTV Studio 307 has only one composite inputStas Sergeev
AverTV Studio 307 has only one composite input. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6203): Fix SVideo input on KWorld DVB-T 220 boardsSimon Farnsworth
Fix SVideo input on KWorld DVB-T 220 boards. Without this patch, the luma pin on the SVideo input is treated as a composite in, and the chroma pin is ignored. Also, fix the radio, and provide a second composite input for people who are used to the existing composite on SVideo connector behaviour. Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6125): whitespace cleanup: replace leading spaces with tabsMichael Krufky
There were many instances of 7-space indents spread throughout the v4l-dvb tree. This patch replaces the 7-space indents with tabs. The whitespace cleaner script doesn't catch these, because it assumes that all indents are 8-space. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6079): Cleanup: remove linux/moduleparam.h from drivers/media filesMauro Carvalho Chehab
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6072): saa7134: add DVB-T support for Avermedia Super 007Edgar Simo
Add DVB-T support for Avermedia Super 007 Analog television is untested. The device lacks input adapters for radio, svideo & composite -- seems to be a DVB-T ONLY device. Signed-off-by: Edgar Simo <bobbens@gmail.com> Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6071): saa7134-dvb: add missing newlineEdgar Simo
This is a simple whitespace cleanup. Signed-off-by: Edgar Simo <bobbens@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307Stas Sergeev
Right now the composite sound input doesn't work on AverTV 307 because of the wrong mux setup. The composite sound is routed via an external 4channel multiplexer controlled by GPIO, while the code assumes an internal multiplexer instead. Presumably this was a copy/paste error, and noone have ever tested the functionality. With the attached patch it works properly, which gives me an ability to finally watch the cable TV under linux. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5821): Saa7134: add remote control support for LifeView FlyDVB-S LR300James Le Cuirot
It has been confirmed that the FlyDVB IR codes currently in the kernel work with the LifeView FlyDVB-S LR300. This one line addition adds it to the list of supported cards. Signed-off-by: James Le Cuirot <chewi@aura-online.co.uk> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5780): Dvb: Remove static dependencies on dvb-pllMichael Krufky
This patch removes all static dependencies on the dvb-pll module. All exported dvb_pll_desc's have been UNexported, and the caller will reference the individual dvb_pll_desc by it's index in the pll_list array. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5776): Hardware MPEG audio fix for SAA7134 based "KNC One ↵Rafael Bilski
TV-Station DVR" card With previous patch card is generating MPEG audio stream too. Unfortunatly I2S audio output is muted. Unmute it. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5775): Alsa fix for SAA7134 based "KNC One TV-Station DVR" cardRafał Bilski
Sound recording doesn't work for this card because ACNI and ACPF are not set before snd_card_saa7134_capture_prepare(). As a result timeout occurs. These registers aren't poked because thread never gets wake up signal. ACNI initialization is done in the thread. Sound is muted when capture stops. Shouldn't be because it may be used during TV playback. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5724): Saa7134-tvaudio: kthread conversionChristoph Hellwig
Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 23:08:45 +0000