aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/saa7134
AgeCommit message (Collapse)Author
2008-07-20V4L/DVB (7976): I2S on for MPEG of saa7134_empressDmitri Belimov
Rework saa7134_enable_i2s function. Add vendor specific data. Add definition for I2S audio output control register. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7949): videodev: renamed the vidioc_*_fmt_* callbacksHans Verkuil
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match the v4l2_buf_type name. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8108): Fix open/close race in saa7134Arjan van de Ven
The saa7134 driver uses a (non-atomic) variable in an attempt to only allow one opener of the device (how it deals with sending the fd over unix sockets I don't know). Unfortunately, the release function first decrements this variable, and THEN goes on to disable more of the device. This allows for a race where another opener of the device comes in after the decrement of the variable, configures the hardware just to then see the hardware be disabled by the rest of the release function. This patch makes the release function use the same lock as the open function to protect the hardware as well as the variable (which now at least has some locking to protect it). Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506Tim Farrington
Also, adds IR table for Avermedia A16d Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8028): Improve error messages for tda1004x attachMauro Carvalho Chehab
A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input ↵Matthias Schwarzott
are working Describe exactly that only s-video and composite input are working on Avermedia A700 Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recoveredMauro Carvalho Chehab
On some alsa versions, it seems that snd_pcm_substream_chip(substream) is returning a NULL pointer. This causes an OOPS, as reported by: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.24/+bug/212271 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/212960 This patch avoids the OOPS by not letting and open() succeed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8022): saa7134: fix race between opening and closing the deviceMarcin Slusarz
decrementing dev->empress_users should be done as last action of ts_release, because it sleeps and write access to dev->empress_started is not protected in any way (additionally closing thread could mute audio after opening thread unmuted it) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8020): Fix callbacks functions of saa7134_empressDmitri Belimov
If I try v4l2-ctl --all -d /dev/video1 or v4l2-ctl --streamon -d /dev/video1 modules crashed: *pde = 00000000 Modules linked in: ac battery loop saa7134_empress(F) saa6752hs(F) tuner_simple(F) tuner_types(F) tea5767(F) tda9887(F) tda8290(F) tea5761(F) tuner(F) snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib saa7134(F) snd_mpu401 parport_pc parport snd_timer snd_hwdep snd_mpu401_uart floppy rtc psmouse videodev(F) v4l1_compat(F) compat_ioctl32(F) v4l2_common(F) videobuf_dma_sg(F) videobuf_core(F) snd_rawmidi snd_seq_device via_ircc pcspkr snd ir_kbd_i2c(F) irda soundcore ir_common(F) crc_ccitt tveeprom(F) i2c_viapro i2c_core button via_agp agpgart evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk 8139cp via82cxxx ide_core 8139too mii ehci_hcd uhci_hcd usbcore thermal processor fan EIP is at __mutex_lock_slowpath+0x29/0x7b DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process v4l2-ctl (pid: 2742, ti=ced7e000 task=cf325260 task.ti=ced7e000) d08e5411 00000000 ced7fed4 00000000 d0975acb 40045612 cfa86ee0 ffffffcd cf2b7000 ced7febc c03858d6 00000019 00000292 d089e4ec cf37b2a0 d089e4a0 Call Trace: [<c028b52b>] mutex_lock+0xa/0xb [<d08e5411>] videobuf_streamon+0xf/0x9a [videobuf_core] [<d0975acb>] __video_do_ioctl+0x136a/0x2d68 [videodev] [<d088f789>] task_end_request+0x40/0x51 [ide_core] [<d088c4aa>] ide_intr+0x187/0x192 [ide_core] [<c016a551>] mntput_no_expire+0x11/0x64 [<c0160b1c>] path_walk+0x90/0x98 [<d0977738>] video_ioctl2+0x173/0x239 [videodev] [<c0140936>] filemap_fault+0x202/0x370 [<c014930a>] __do_fault+0x2c3/0x2fe [<c014ab03>] handle_mm_fault+0x22a/0x49f [<c0162737>] vfs_ioctl+0x47/0x5d [<c0162992>] do_vfs_ioctl+0x245/0x258 [<c01629e6>] sys_ioctl+0x41/0x5b [<c01036a6>] sysenter_past_esp+0x5f/0x85 ======================= After this fix all of that commands works without problem: v4l2-ctl --all -d /dev/video1 Driver Info: Driver name : saa7134 Card type : Beholder BeholdTV M6 Extra Bus info : PCI:0000:00:0d.0 Driver version: 526 Capabilities : 0x05000001 Video Capture Read/Write Streaming Format Video Capture: Width/Height : 720/576 Pixel Format : MPEG Field : Any Bytes per Line: 0 Size Image : 58656 Colorspace : Unknown (00000000) Video input : 0 (CCIR656) Video Standard = 0x000000ff PAL-B/B1/G/H/I/D/D1/K P.S. data from /dev/video1 is not correct :(( . Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8005): Fix OOPS if frontend is nullMauro Carvalho Chehab
Thanks to timf <timf@iinet.net.au> and Mike Galbraith <efault@gmx.de> to report this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7975): saa7134_empressDmitri Belimov
This is patch for fix data structure in querycap syscall. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7881): saa7134: fixed a compile warning in saa7134-core.cHartmut Hackmann
patch 779169257208 made the variable mask unnecessary. This patch just removes the declaration. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7880): saa7134: remove explicit GPIO initializationHartmut Hackmann
This causes a problem with the audio mute on some cards and is done implictly in the audio initialization code. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7851): Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7846): Re-creates VIDEO_TUNERMauro Carvalho Chehab
VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the previous behaviour before the creation of MEDIA_TUNER. Before this patch, tuner.ko were created even for drivers that don't need a tuner (like webcam drivers). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7805): saa7134: dvb_unregister_frontend() shouldn't be called, if ↵Mauro Carvalho Chehab
not registered yet Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14V4L/DVB (7801): saa7134: detach frontend, if tuner or Diseqc attach failsMauro Carvalho Chehab
Before this patch, an error at tuner or diseqc were discarded by the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-08fix irq flags in saa7134Steven Rostedt
Some files in the drivers/media/video/saa7134 directory uses "int" for flags. This can cause hard to find bugs on some architectures. This patch converts the flags to use "long" instead. This bug was discovered by doing an allyesconfig make on the -rt kernel where checks are done to ensure all flags are of size sizeof(long). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab
namespace for all of them.
2008-04-29V4L/DVB(7767): Move tuners to common/tunersMauro Carvalho Chehab
There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7766): saa7134: add another PCI ID for Beholder M6Igor Kuznetsov
Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7765): Add support for Beholder BeholdTV H6Igor Kuznetsov
Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7753): saa7134: fix tuner setupMauro Carvalho Chehab
Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when saa7134 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from saa7134-i2c, moving it to the proper place, after taking eeprom into account. Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits) V4L/DVB (7731): tuner-xc2028: fix signal strength calculus V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800 V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2 V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure V4L/DVB (7719): pvrusb2: Implement input selection enforcement V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx V4L/DVB (7716): pvrusb2: clean up global functions V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__ V4L/DVB (7714): pvrusb2: Fix hang on module removal V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown V4L/DVB (7712): pvrusb2: Close connect/disconnect race V4L/DVB (7711): pvrusb2: Fix race on module unload V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices ...
2008-04-24V4L/DVB (7677): saa7134: Add/fix Beholder entriesDmitry Belimov
Beholder TV/FM tuners: Changes: Add support Beholder Columbus PCMCIA card. Add key map for remote control of Beholder Columbus PCMCIA card. Fix gpiomask for all Beholder tuners. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7676): saa7134: fix: Properly handle busy states on i2c busDmitry Belimov
There are two conditions, reported by saa7134 that indicates that the I2C bus is busy: TO_SCL and TO_ARB. On both states, it needs to wait for I2C release, before using the bus. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7654): tda10086: make the xtal frequency a configuration optionHartmut Hackmann
Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7538): Adds selectable adapter numbers as per module optionJanne Grunau
The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7537): cx88/saa7134: Fix: avoid OOPS on module unloadMauro Carvalho Chehab
If frontend is not attached, both cx88-dvb and saa7134-dvb don't register DVB. However, dvb unregister were inconditionally called. Due to that, an OOPS is generated. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7526): media/video/saa7134 replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7507): saa7134: add analog support for Avermedia A700 cardsMatthias Schwarzott
Add support for composite and s-video inputs on Avermedia DVB-S Pro and DVB-S Hybrid+FM cards (both labled A700) to the saa7134 driver. XC2028 support for Hybrid+FM is still missing. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7458): saa7134: Adds analog support for Avermedia A16DMauro Carvalho Chehab
Thanks to timf <timf@iinet.net.au>, "Richard (MQ)" <osl2008@googlemail.com> and gian luca rasponi <lucarasp@inwind.it> for their tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7441): kconfig fixes for tuner-simpleMichael Krufky
Update Kconfig for the hybrid devices recently converted to use tuner-simple rather than dvb-pll. dvb-bt8xx no longer uses dvb-pll at all, so remove all references to dvb-pll within that driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7415): use tuner-simple for Philips TUV1236D digital tuning supportMichael Krufky
Convert cx88-dvb and saa7134-dvb to use tuner-simple instead of dvb-pll for Philips TUV1236D Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7414): use tuner-simple for Philips TD1316 digital tuning supportMichael Krufky
Convert saa7134-dvb to use tuner-simple instead of dvb-pll for Philips TD1316 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7413): use tuner-simple for Philips FMD1216ME digital tuning supportMichael Krufky
Convert cxusb, cx88-dvb and saa7134-dvb to use tuner-simple instead of dvb-pll for Philips FMD1216ME Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7404): saa7134.h: Remove unnecessary validationDouglas Schilling Landgraf
Removed unnecessary VIDIOC_G_PRIORITY validation. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7398): Adds an error if priv argument of tuner_callback is NULLMauro Carvalho Chehab
Adds a consistency check to avoid OOPS, if tuner_callback priv argument is NULL. Also, simplifies callback codes on cx88. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7396): saa7134: fixed pointer in tuner callbackHartmut Hackmann
The pointer transferred directly points to the saa7134_dev structure Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7395): saa7134: start 2nd LND supply of Medion cards only if neededHartmut Hackmann
The ISL6405 LNB supply is used on several Creatix / Medion cards. But only the MD8800 needs its second section. So don't start it unless it is needed. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7394): saa7134: add number of devices checkAlan McIvor
This patch fixes reported problems when trying to add a 9th device into a system. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7393): tda827x: fixed support of tuners with LNAHartmut Hackmann
Tuner refactoring broke support of tuners with LNA configurations 1 and 2 for both, analog TV and DVB-T. Additionally, this patch initializes the saa713x gpios defined by the gpiomask at driver init to avoid undefined stated at dvb. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7392): saa7134: support 2nd DVB-S section of the MD8800Hartmut Hackmann
There are some restrictions: - The 2nd DVB-S section will only work if the 1st is configured for DVB-S too. so "options saa7134-dvb use_frontend=0,1" won't work. - Currently it is not possible to set the higher LNB supply voltages, so 14V instead of 13V in the 2nd section. - It is not possibe to turn off the 2nd LNB supply independently. This comes from the problem that the 2nd section can't access the i2c interface of the LNB supply chip. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7391): saa7134: Add DVB-S support for the MD 1734 cards with 2 saa7134Hartmut Hackmann
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7390): saa7134: clear audio DSP interface after access errorHartmut Hackmann
In the case of an access error to the high latency registers of the audio DSP, the interface needs to be cleared, otherwise a cascade of errors occurs. This patch is closely modeled after a proposal by Mirek Slugen Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7388): saa7134: fix radio entry for xc2028/3028 boardsMauro Carvalho Chehab
If left in blank, the driver will use value 0 (Temic PAL) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7387): saa7134: Fix xc3028 entriesMauro Carvalho Chehab
Tuner addresses were incorrect. Fix the entries. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7381): tuner: rename TUNER_PHILIPS_ATSC to TUNER_PHILIPS_FCV1236DMichael Krufky
TUNER_PHILIPS_ATSC is an ambiguous name for a tuner. Rename it to TUNER_PHILIPS_FCV1236D to be more descriptive. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7375): cx88/saa7134: fix magic number for xc3028 reusage detectionMauro Carvalho Chehab
tuner-xc2028 needs to know when a DVB module is sharing the same analog tuner. This is done by comparing a magic number that needs to be the same on analog and on digital. To make easier, this magic number is a pointer to some data struct. With the previous code, two different pointers were using, causing a miss-detection. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7262): Add support for xc3028-based boardsMauro Carvalho Chehab
This patch adds support for the following saa7134 xc3028 based boards: 132 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436] 133 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936] 134 -> Avermedia M115 [1461:a836] 135 -> Compro VideoMate T750 [185b:c900] This is based on a original patch thanks to Markus Rechberger that added xc3028 gpio init code for the above boards. This patch moves saa7134_tuner_callback to saa7134-cards, originally used only by tda8290 DVB-S boards. The callback was made more generic to support other tuners. Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the basis for xc5000 tuner callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-20 12:22:15 +0000