aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2009-09-19V4L/DVB (12940): SAA7164: IRQ / message timeout related changeSteven Toth
In some cases we're seeing large timeouts on commands. I'm changing the implementation so that the deferred worker checks the PCI bus for any messages and signals the waiting caller accordingly. The previous mechanism was too unreliable. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12939): SAA7164: Removed a duplicate call to address any PCI quirks.Steven Toth
Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12938): SAA7164: Increase the firmware command timeout to avoid ↵Steven Toth
firmware errors. The firmware typically responds in < 50ms and, via the interrupts and deferred work queue the caller (blocked in the driver) is signalled very efficiently. In a highly stressed system this can take many multiples of seconds. So, we need a larger maximum timeout for busy systems. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12937): SAA7164: Cleanup a printkSteven Toth
Cleanup a printk and output two helpful driver params in debug mode. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12936): SAA7164: Added waitsecs module parameterSteven Toth
Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12935): SAA7164: Ensure we specify I/F's for all bandwidthsSteven Toth
Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12934): SAA7164: Fix i2c eeprom read errors during load (some boards).Steven Toth
Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12933): SAA7164: Fix IRQ related system hang when firmware is not ↵Steven Toth
found. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12932): SAA7164: Fixed the missing eeprom parse on a specific board.Steven Toth
Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12931): SAA7164: Fix the 88021 definition to work with production ↵Steven Toth
boards. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12930): SAA7164: Removed spurious I2C errors during driver load ↵Steven Toth
with DVB-T boards. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12929): SAA7164: OOPS avoidance during interrupt handlingSteven Toth
Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12928): SAA7164: Increase firmware load toleranceSteven Toth
It's timing out and aborting firmware load too quickly on some platforms, this increases the upper limit. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12927): SAA7164: Remove volatiles for PCI writes (coding style ↵Steven Toth
violation) Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12926): SAA7164: Email address changeSteven Toth
SAA7164: Email address change Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12925): SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lockSteven Toth
SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12924): SAA7164: Fix some 32/64bit compile time warningsSteven Toth
SAA7164: Fix some 32/64bit compile time warnings Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 siliconSteven Toth
This patch adds support for all of the known shipping Hauppauge HVR-2200 and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this time. Both tuners are supported. Volatiles and typedefs need rework, the rest is coding style compliant. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12884): cx18: Eliminate warning about discarding 'const' is ↵Andy Walls
assignment for IR init i2c-kbd-i2c allows a bridge driver to pass information about IR configuration, but uses a "void *" to pass along what is essentially constant data. This change casts a const * to a void * to remove the warning. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12882): em28xx: remove text editor tags from em28xx-vbi.cDevin Heitmueller
Remove some emacs tags from em28xx-vbi.c, which were copied from cx88-vbi.c, per Mauro Carvalho Chehab's request. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12881): em28xx: fix codingstyle issues in em28xx-video.cDevin Heitmueller
Fix some codingstyle issues introduced during the addition of em28xx VBI support. The patch makes no functional changes other than converting a few debug printk() statements to em28xx_isocdbg. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12880): em28xx: fix codingstyle issues introduced with VBI supportDevin Heitmueller
Fix a few codingstyle issues introduced when I was adding the VBI support to the em28xx driver. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12878): gspca - m5602-s5k4aa: Add vflip quirk for the GX700Brian Kloppenborg
The MSI GX700 is a tricky machine to support. Some revisions do need the sensor flipped, but not all. Add another quirk, distinguished by its BIOS date. Signed-off-by: Brian Kloppenborg <bkloppenborg@gmail.com> Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12877): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo Pa 2548Erik Andrén
Add vflip quirk for the Fujitsu Siemens Amilo Pa 2548 Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12875): cx23885: disable tda18271 slave tuner output / loop thru in ↵Michael Krufky
standby mode Enable the standby mode optimization to disable the tda18271 slave tuner output / loop thru options when in low power mode Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12874): pvrusb2: disable tda18271 slave tuner output / loop thru in ↵Michael Krufky
standby mode Enable the standby mode optimization to disable the tda18271 slave tuner output / loop thru options when in low power mode Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12873): saa7134: disable tda18271 slave tuner output / loop thru in ↵Michael Krufky
standby mode Enable the standby mode optimization to disable the tda18271 slave tuner output / loop thru options when in low power mode Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12750): em28xx: fix unused variable warningDevin Heitmueller
Remove unused variable from when I introduced the g_std() function. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12749): em28xx: remove unneeded code that set VINCTRL registerDevin Heitmueller
Remove redundant call to set the vinctrl register. This eliminates any ambiguity as to how the register is configured (since it is now always set in em28xx_set_outfmt). This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12748): em28xx: implement g_std v4l callDevin Heitmueller
We need to implement the g_std call, or else the default norm always gets returned, which breaks VBI capturing if you had changed the standard to NTSC using s_std. I had temporarily changed the default norm to NTSC so that zvbi-ntsc-cc wouldn't choke, so now that we are returning the correct value, switch it back to PAL as the default. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12747): em28xx: only advertise VBI capability if supportedDevin Heitmueller
Change the code so we only claim to support VBI if the underlying chipset actually has the support. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12746): em28xx: do not create /dev/vbiX device if VBI not supportedDevin Heitmueller
Do not create the VBI device in cases where VBI is not supported on the target em28xx chip. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12745): em28xx: remove unreferenced variableDevin Heitmueller
Remove an unreferenced variable introduced during the VBI introduction. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12744): em28xx: restructure fh/dev locking to handle both video and vbiDevin Heitmueller
The current locking infrastructure didn't support having multiple fds accessing the device (such as video and vbi). Rework the locking infrastructure, borrowing the design from cx88. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12743): em28xx: fix mmap_mapper with vbiDevin Heitmueller
When adding support for both video and VBI, I missed the mmap ioctl. Add the missing call. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12742): em28xx: add raw VBI support for NTSCDevin Heitmueller
Add support for raw VBI capture for the em28xx bridge, currently only for NTSC. Support for PAL capture to follow shortly (including the removal of numerous hard-coded NTSC-specific sizes for capture buffers, etc). Note that the code currently changes the default current norm from PAL to NTSC (so that zvbi-ntsc-cc works properly). The default norm really should be moved into a board-level parameter. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12741): em28xx: make video isoc stream work when VBI is enabledDevin Heitmueller
Add code enabling the VBI registers for variants of the em28xx chip that support VBI, and make sure the isoc streaming code continues to work for the video component of the stream (note the video and vbi data arrive intermixed on the same isoc pipe). Note that this version just drops the actual VBI data onto the floor as opposed to processing it. The "#ifdef 0" tags are for the videobuf code that appears in the next patch in this series. We created a separate version of the isoc_copy version for parsing the version of the stream that includes VBI data. In theory, they might be able to be merged at some point in the future, but the initial goal is to ensure that we do not cause any regressions with devices that do not have VBI support. This work was sponsored by EyeMagnet Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18V4L/DVB (12740): em28xx: better describe vinctrl registersDevin Heitmueller
Properly document the video input control register, in preparation for the addition of VBI support. Note this patch makes no functional changes. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-16Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/kernel/vmlinux.lds.S
2009-09-14V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2Douglas Schilling Landgraf
Added Kworld DVD Maker 2 Thanks to C Western <l@c-m-w.me.uk> for reporting this board. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12713): em28xx: Cleanups at ir_i2c handlerMauro Carvalho Chehab
There are some extra parenthesis at the clauses, and some switch() tests for boards that don't have i2c ir. Remove those extra code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when neededMauro Carvalho Chehab
Currently, the logic to load ir i2c ancillary module is broken. It is associated to Hauppauge devices with IR flag on their eeprom, no matter if the device uses i2c or em28xx direct IR support. That's wrong. Instead, add a flag to the boards that use i2c IR chips and load the module only for those devices and if ir is not disabled. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent objectMauro Carvalho Chehab
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to rise this question. Before this patch, if ir-kbd-i2c were probed after SAA7134, trash data were used. Compile tested only, but the patch is identical to em28xx one. So, it should work properly. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a ↵Andy Walls
persistent object ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers for pointing out a solution, and Dustin Mitchell for testing against a 2.6.30 kernel. Reported-by: Dustin Mitchell <soxslayer@gmail.com> Reported-by: Brian Rogers <brian@xyzw.org> Tested-by: Dustin Mitchell <soxslayer@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent objectMauro Carvalho Chehab
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to rise this question. Before this patch, if ir-kbd-i2c were probed after em28xx, trash data were used. After the patch, no matter what order, it is properly reported as tested by me: input: i2c IR (i2c IR (EM2840 Hauppaug as /class/input/input10 ir-kbd-i2c: i2c IR (i2c IR (EM2840 Hauppaug detected at i2c-4/4-0030/ir0 [em28xx #0] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111Brian Johnson
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 ↵Brian Johnson
sensors. Using the MT9M111's IFP to handle exposure/gain gives better results. Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968Brian Johnson
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12703): gspca - sn9c20x: Reduces size of objectJoe Perches
Use s16 instead of int where possible. Use struct instead of arrays Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensorsBrian Johnson
Fixes broken exposure on SOI968 webcams that was causing the camera to display a black screen Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-14 20:05:00 +0000