aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (10274): cx18: Fix a PLL divisor update for the I2S master clockAndy Walls
A redundant PLL divisior update for the I2S master clock after AV core firmware load was missed in earlier PLL parameter changes. This one really doesn't matter because it's redundant and gets overwritten, but the driver should be self consistent in the values used. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10271): saa7146: convert to video_ioctl2.Hans Verkuil
The conversion to video_ioctl2 is the first phase to converting this driver to the latest v4l2 framework. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10269): Add support for DVBWorld DVBS2 PCI-e 2005.Igor M. Liplianin
DVBWorld DVBS2 PCI-e 2005 card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/DVBWorld_DVB-S2_2005_PCI-Express_Card The card tested by me (Igor). Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10267): Add support for TeVii S470 DVB-S2 PCI-e card.Igor M. Liplianin
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/TeVii_S470 The card tested by me (Igor). Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10266): Add support for TurboSight TBS6920 DVB-S2 PCI-e card.Igor M. Liplianin
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge and cx24116 demodulator. http://www.linuxtv.org/wiki/index.php/TBS_6920 The card tested by me (Igor). Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10263): zr364xx: add support for Aiptek DV T300Antoine Jacquet
Tested-by: Hámorszky Balázs <balihb@freepop.hu> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10259): pvrusb2: Code module name directly in printkMike Isely
The name of the pvrusb2 module is not likely to ever change, and there are plenty of other places where the name is directly coded, so there is little utility in using a macro to infer the module name here. In addition, using that macro complicates other uses of the driver involving older kernels where this macro works differently. Yes I know for many places we don't have to worry about that. But my alternative is that I have to build special logic in the pvrusb2 standalone driver to special-case what is otherwise costmetic and that is just plain nuts for something as trivial as this, especially since this change does not at all have any compile time or run time impact on the driver. I'm just removing a nicety that didn't have a lot of value here to begin with. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10258): pvrusb2: Issue VIDIOC_INT_INIT to v4l2 modules when they ↵Mike Isely
first attach It appears that various v4l-dvb drivers are changing to require explicit initialization before use. This change to the pvrusb2 driver implements an automatic issuance of VIDIOC_INT_INIT when a module is bound to the driver, thus conforming to the new behavior. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10255): em28xx: Clock (XCLK) CleanupRobert Krakora
Clock (XCLK) Cleanup Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10251): cx25840: add comments explaining what the init() does.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10249): v4l2-common: added v4l2_i2c_tuner_addrs()Hans Verkuil
Add v4l2_i2c_tuner_addrs() to obtain the various I2C tuner addresses. This will be used in several drivers, so make this a common function as we do not want to have these I2C addresses all over the place. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10247): saa7134: convert to the new v4l2 framework.Hans Verkuil
Register v4l2_device and switch to v4l2_subdev to access the i2c modules. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10246): saa6752hs: convert to v4l2_subdev.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10244): v4l2: replace a few snprintfs with strlcpyHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10242): pwc: add support for webcam snapshot buttonNam Phạm Thành
This patch adds support for Philips webcam snapshot button as an event input device, for consistency with other webcam drivers. Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10239): pvrusb2: Fix misleading comment caused by earlier commitMike Isely
Previous v4l-dvb changeset id 4cc8ed11e2e0 changed the pvrusb2-hdw internal API regarding i2c chip debug register access. However that change failed to also update the corresponding function comment describing the API. As driver maintained I never saw a request for an ack on that change; there probably should have been one especially since the manner in which this API operates was changed - its interface is now entangled with a v4l specific struct and I would have preferred to keep this API clear of moving-target v4l-isms such as this one if at all possible which is why I had done it the way I did before. But whatever. This commit at least fixes the comment issue. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10238): pvrusb2: Change sysfs serial number handlingMike Isely
Use the new pvrusb2 internal API to grab the device identifier, rather than generating it directly. This unifies some code and make possible use of that identifier in places other than sysfs. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10237): pvrusb2: Generate a device-unique identifierMike Isely
Implement a new internal function to create a string device identifier. This ID stays with the specific device, making it useful to user space to identify specific devices. We use the serial number if available; otherwise we give up and just spit out a unit/instance ID. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10236): pvrusb2: Stop advertising VBI capability - it isn't thereMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10231): v4l2-subdev: add v4l2_ext_controls supportHans Verkuil
The saa6752hs module needs this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10211): vivi: Implements 4 inputs on viviMauro Carvalho Chehab
This patch adds the capability of selecting between 4 different inputs on vivi driver. Input 0 is the normal color bar, while inputs 1-3 are modified color bars. This allows testing input selection on userspace applications and serves as an implementation model for other drivers. The current approach allows a maximum of 10 different inputs, since the input name generator assumes that we need just one digit to present the input. It shouldn't be hard to modify it to present a bigger name of inputs, but, in fact, it doesn't make much sense of doing it for this test driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-25Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2009-03-24v4l: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: mchehab@infradead.org Cc: linux-media@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24Merge branch 'topic/snd_card_new-err' into for-linusTakashi Iwai
2009-03-19Merge branch 'omap-clks3' into develRussell King
Conflicts: arch/arm/mach-omap2/clock.c
2009-03-13Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
Conflicts: arch/arm/mach-at91/gpio.c
2009-03-13V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fixAntti Palosaari
zl10353 i2c-gate was always closed and due to that devices having tuner behind i2c-gate were broken. Add module configuration which allows disabling i2c-gate only when really needed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09[ARM] pxa: move DMA registers definitions into <mach/dma.h>Eric Miao
1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into <mach/dma.h> and make relevant drivers include it instead of <mach/pxa-regs.h>. 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-05V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 EyesMauro Carvalho Chehab
AFAIK, the bt866 is only seen on AverMedia 6 Eyes. However, no module selects it. Adds a proper select for this driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-05V4L/DVB (10832): tvaudio: Avoid breakage with tda9874aVitaly Wool
The 'bytes' array is 64 bytes large but the easy standard programming (TDA9874A_ESP) has a number of 255, outside the shadow array size. This patch increases the size of the shadow array in order to accomodate this register. Signed-off-by: Vitaly Wool <vital@embeddedalley.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-05V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks.Gregory Lardiere
The previous probe rotine tried to read 6 bytes in one chunk which currently isn't allowed. This is the rev. 10346 243399e67c41 readded with a high priority. Signed-off-by: Gregory Lardiere <spmf2004-m560x@yahoo.fr> Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - touchpad driver miss-recognising logitech mice Input: synaptics - ensure we reset the device on resume Input: usbtouchscreen - fix eGalax HID ignoring Input: ambakmi - fix timeout handling in amba_kmi_write() Input: pxa930_trkball - fix write timeout handling Input: struct device - replace bus_id with dev_name(), dev_set_name() Input: bf54x-keys - fix debounce time validation Input: spitzkbd - mark probe function as __devinit Input: omap-keypad - mark probe function as __devinit Input: corgi_ts - mark probe function as __devinit Input: corgikbd - mark probe function as __devinit Input: uvc - the button on the camera is KEY_CAMERA Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86 Input: atkbd - make forced_release_keys[] static Input: usbtouchscreen - allow reporting calibrated data
2009-02-26V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperHGuennadi Liakhovetski
Recent format-negotiation patches caused S_CROP breakage in pxa_camera.c and sh_mobile_ceu_camera.c drivers, fix it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-26V4L/DVB (10659): em28xx: register device to soundcard for sysfsNicola Soranzo
As explained in "Writing an ALSA driver" (T. Iwai), audio drivers should set the struct device for the card before registering the card instance. This will add the correct /sys/class/sound/cardN/device symlink, so HAL can see the device and ConsoleKit sets its ACL permissions for the logged-in user. For em28xx audio capture cards found e.g. in Hauppauge WinTV-HVR-900 (R2), this patch fixes errors like: ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card Error opening audio: Permission denied when running mplayer as a normal user. Signed-off-by: Nicola Soranzo <nsoranzo@tiscali.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10626): ivtv: fix regression in get sliced vbi formatHans Verkuil
The new v4l2_subdev_call used s_fmt instead of g_fmt. Thanks-to: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10625): ivtv: fix decoder crash regressionHans Verkuil
The video_ioctl2 conversion of ivtv in kernel 2.6.27 introduced a bug causing decoder commands to crash. The decoder commands should have been handled from the video_ioctl2 default handler, ensuring correct mapping of the argument between user and kernel space. Unfortunately they ended up before the video_ioctl2 call, causing random crashes. Thanks to hannes@linus.priv.at for testing and helping me track down the cause! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time.Adam Baker
If a device using the gspca framework is unplugged while it is still streaming then the call that is used to free the URBs that have been allocated occurs after the pointer it uses becomes invalid at the end of gspca_disconnect. Make another cleanup call in gspca_disconnect while the pointer is still valid (multiple calls are OK as destroy_urbs checks for pointers already being NULL. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-08[ARM] omap: omap24xxcam: use short connection IDs for omap2 clocksRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-01V4L/DVB (10403): saa7134-alsa: saa7130 doesn't support digital audioMauro Carvalho Chehab
According with saa7130 public datasheet, saa7130 doesn't support digital audio. This is also confirmed by experimental tests. So, it doesn't make sense to let saa7134-alsa register for those chipsets. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10229): ivtv: fix memory leakHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10385): gspca - main: Fix memory leak when USB disconnection while ↵Jean-Francois Moine
streaming. Resetting the streaming flag on disconnection prevented the URBs to be freed when streaming was active. Also, USBs cannot be killed after disconnection (oops in [usbcore] unlink1). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10325): em28xx: Fix for fail to submit URB with IRQs and ↵Robert Krakora
Pre-emption Disabled Trace: (Provided by Douglas) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:558 in_atomic():0, irqs_disabled():1 Pid: 4918, comm: sox Not tainted 2.6.27.5 #1 [<c04246d8>] __might_sleep+0xc6/0xcb [<c058c8b0>] usb_kill_urb+0x1a/0xd8 [<c0488e68>] ? __kmalloc+0x9b/0xfc [<c0488e85>] ? __kmalloc+0xb8/0xfc [<c058cd5a>] ? usb_alloc_urb+0xf/0x31 [<f8dd638c>] em28xx_isoc_audio_deinit+0x2f/0x6c [em28xx_alsa] [<f8dd6573>] em28xx_cmd+0x1aa/0x1c5 [em28xx_alsa] [<f8dd65e1>] snd_em28xx_capture_trigger+0x53/0x68 [em28xx_alsa] [<f8aa8674>] snd_pcm_do_start+0x1c/0x23 [snd_pcm] [<f8aa85d7>] snd_pcm_action_single+0x25/0x4b [snd_pcm] [<f8aa9833>] snd_pcm_action+0x6a/0x76 [snd_pcm] [<f8aa98f5>] snd_pcm_start+0x14/0x16 [snd_pcm] [<f8aae10e>] snd_pcm_lib_read1+0x66/0x273 [snd_pcm] [<f8aac5a3>] ? snd_pcm_kernel_ioctl+0x46/0x5f [snd_pcm] [<f8aae4a7>] snd_pcm_lib_read+0xbf/0xcd [snd_pcm] [<f8aad774>] ? snd_pcm_lib_read_transfer+0x0/0xaf [snd_pcm] [<f89feeb6>] snd_pcm_oss_read3+0x99/0xdc [snd_pcm_oss] [<f89fef9c>] snd_pcm_oss_read2+0xa3/0xbf [snd_pcm_oss] [<c064169d>] ? _cond_resched+0x8/0x32 [<f89ff0be>] snd_pcm_oss_read+0x106/0x150 [snd_pcm_oss] [<f89fefb8>] ? snd_pcm_oss_read+0x0/0x150 [snd_pcm_oss] [<c048c6e2>] vfs_read+0x81/0xdc [<c048c7d6>] sys_read+0x3b/0x60 [<c04039bf>] sysenter_do_call+0x12/0x34 ======================= The culprit in the trace is snd_pcm_action() which invokes a spin lock which disables pre-emption which disables an IRQ which causes the __might_sleep() function to fail the irqs_disabled() test. Since pre-emption is enabled then it is safe to de-allocate the memory if you first unlink each URB. In this instance you are safe since pre-emption is disabled. If pre-emption and irqs are not disabled then call usb_kill_urb(), else call usb_unlink_urb(). Thanks to Douglas for tracking down this bug originally!!! [dougsland@redhat.com: Fixed codyingstyle] Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10314): cx25840: ignore TUNER_SET_CONFIG in the command callback.Hans Verkuil
These days TUNER_SET_CONFIG is broadcast to the other i2c devices and that triggers a fw load on the cx25840. Ignore this command since cx25840 isn't a tuner and you really do not want to load the firmware that early. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10261): em28xx: fix kernel panic on audio shutdownDevin Heitmueller
Revert a change made in change 9743 which resulted in a kernel panic in some cases on shutdown of the audio stream. First discovered when working on the Pinnacle 880e support, and later reproduced by a user on the mailing list with the HVR-900 as well. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10257): em28xx: Fix for KWorld 330U BoardRobert Krakora
Fix for KWorld 330U Board Many thanks to Devin and Mauro!!! Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10256): em28xx: Fix for KWorld 330U AC97Robert Krakora
Fix for KWorld 330U AC97 Many thanks to Devin and Mauro again!!! Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10254): em28xx: Fix audio URB transfer buffer race conditionRobert Krakora
em28xx: Fix audio URB transfer buffer memory leak and race condition/corruption of capture pointer Leak fix kindly contributed by Pádraig Brady. Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10250): cx25840: fix regression: fw not loaded on first useHans Verkuil
With the conversion to v4l2_subdev one bit of code was accidentally dropped: on receiving the first command the driver has to load the fw. A new init() command was introduced to do that explicitly for bridge drivers that are converted to use v4l2_subdev, but old drivers that are not yet converted no longer worked. This patch fixes this regression for these old drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 18:23:58 +0000