aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2006-09-26V4L/DVB (4479): LNB voltage control was inverted for the benefit of ↵Yeasah Pell
geniatech cards on Kworld 1) It sets LNBDCPol differently based on the card type. Now it should work properly for both the kworld and geniatech cards. 2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command (the cx88-dvb level handles the actual voltage on/off, but it still passes the ioctl down to the cx24123 level, which previously rejected the OFF as invalid so the ioctl would report failure) Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Yeasah Pell <yeasah@schwide.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4475): Fix most Compat32 stuff on V4L2Mauro Carvalho Chehab
Tested on x64 with a bttv board. Most Get ioctls are fixed. The only non-completely working one is VIDIOCGAUDIO. All other IOR ioctls give the same results on x86_64 and i386 architectures. Thanks to Alastair Poole <netstar@gatheringofgray.com> for part of this patch and tests on ppc64. Signed-off-by: Alastair Poole <netstar@gatheringofgray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4474): On some cases, depth were not returned.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4439): Whitespace cleanups for cx88-dvb and saa7134-dvbMichael Krufky
This patch cleans up some whitespace problems after the dvb_attach changes in cx88-dvb.c and saa7134-dvb.c, and converts some capitalized i2c address constants to lowercase. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4438): Fix dvb_pll_attach for nxt2004-based cardsMichael Krufky
The test in dvb-pll to see if a tuner's PLL responds when attaching fails on NXT2004 based boards before the firmware is loaded. This patch allows us to avoid this test by not passing an I2C bus handle to the dvb_pll_attach routine, just as Chris Pascoe has done for MT352 and ZL10353 based boards when used in cx88-dvb. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4436): Dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4422): Improved comment for AR device and fix some typosMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4421): V4L2 Conversion: saa5246a, saa5249, vino, hexium_orion, ↵Mauro Carvalho Chehab
hexium_gemini Just a few adjustments were required on those drivers to be V4L2 compliant. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4417): Add support for PAL-Nc in cx24850.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4413): Konicawc - handle errors from input_register_device()Dmitry Torokhov
Compile-tested only (no hardware) Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4398): Add support for Acorp TV134DS + FlyDVB-S cards.Igor M. Liplianin
Add support for Acorp TV134DS and FlyDVB-S cards (both based on tda10086+tda826x) Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4391): Refactor dvb_detach calls into a single dvb_frontend_detach ↵Andrew de Quincey
function. Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4388): Remove frontend selection from cx88/saa7134 driversAndrew de Quincey
Replaced with dvb_attach() Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4387): Add Kconfig infrastructure for dvb_attachAndrew de Quincey
Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4377): Force horizontal resolution limits in the pvrusb2 driverMike Isely
This change causes the pvrusb2 driver to limit horizontal resolution to be only 720 if 24xxx device hardware is being used. This is a workaround for an unsolved problem in the driver where if the resolution is set to something other than 720 the video quality will be _seriously_ degraded. It only happens on 24xxx devices (29xxx are unaffected by the problem and unaffected by this change). Once the problem is finally solved, this small change can be removed. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4376): Make it possible for run-time calculation of control min/max ↵Mike Isely
in pvrusb2 The internal control implementation in the pvrusb2 driver normally encodes integer range limits using literal values in a const structure. This change adds two function pointers, which if not null will be called through in order to determine integer min / max values. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4375): Eliminate hardcoded limits in VIDIOC_[S|TRY]_FMT for pvrusb2Mike Isely
The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding limits on the range for allowed resolution, but it would be much better if we instead just queried the internal control for these values. This then opens the door for the driver to adjust these limits based on the detected hardware. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4372): Clean up some post mpeg-controls issues in pvrusb2Mike Isely
Fix a few miscellaneous issues in the pvrusb2 driver related to use of the new mpeg controls. This also should fix problems involving update of the saa7115 / cx25840 configuration as control changes are made. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4366): Remove of couple of useless linesTrent Piepho
A buffer was set just before an if block, and then again in both branches of the if. Obvious coding error. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4362): Cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV ↵David Bussenschutt
Tuner card support Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: David Bussenschutt <buzz@oska.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4361): Cx88: add support for Norwood PCI TV Tuner (non-pro)Peter Naulls
This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: Peter Naulls <peter@chocky.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4360): Cx88: add autodetection support for AverMedia M150-DMichael Krufky
This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4359): Cx88: add initial support for Hauppauge HVR3000 trimode cardEric Thomas
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: Eric Thomas <ethomas@claranet.fr> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4339): Removed the remaining config.h stuffMauro Carvalho Chehab
Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4309): Added PCI ID of the Genius VideoWonder Dual CardbusHartmut Hackmann
It is just another Lifeview clone Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4308): Added PCI ID for AverMedia DVB-T 777 with SAA7133Hartmut Hackmann
The change is just an additional PCI ID Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4307): Added support for the md8800 quadro boardHartmut Hackmann
Analog TV, CVBS, S-video and DVB-T are working, DVB-S not yet Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-25[PATCH] VIDIOC_ENUMSTD bugJonathan Corbet
The v4l2 API documentation for VIDIOC_ENUMSTD says: To enumerate all standards applications shall begin at index zero, incrementing by one until the driver returns EINVAL. The actual code, however, tests the index this way: if (index<=0 || index >= vfd->tvnormsize) { ret=-EINVAL; So any application which passes in index=0 gets EINVAL right off the bat - and, in fact, this is what happens to mplayer. So I think the following patch is called for, and maybe even appropriate for a 2.6.18.x stable release. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-10V4L/DVB (4608c): Fix I2C dependencies for saa7146 modulesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey
Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4605): Fixes an issue with V4L1 and make headers-installMauro Carvalho Chehab
V4L1 support should be disabled when no CONFIG_VIDEO_V4L1_COMPAT is defined, to allow checking for broken V4L2 ports. This is very important during the migration phase for V4L2 API. However, userspace apps should be capable of using both APIs, since they need to test at runtime, via VIDIOCGCAP ioctl, if V4L1 is supported. So, when __KERNEL__ is not defined, those ioctls and corresponding structs should be visible. This patch also removes the obsolete defines HAVE_V4L1 and HAVE_V4L2, that where causing some confusion, and were replaced by CONFIG_VIDEO_V4L1_COMPAT and CONFIG_VIDEO_V4L2. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900.Mauro Carvalho Chehab
Previously, this were reported: Ooops: IR config error [card=139] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF ↵Hermann Pitton
switch functionality The tena_9533_di_pal_ranges use 0x04 instead the original 0x08 for the UHF (range 2) switching. This is wrong and therefore nothing happens. Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to make the UHF switch working again. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4430): Quickcam_messenger compilation fixDiego Calleja
In bugzilla #6943, Maxim Britov reported: "I can enable Logitech quickcam support in .config, but it want be compile. I have to add into drivers/media/video/Makefile: obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/" He's right, just enable that driver as module while disabling every other driver that gets into that directory, nothing will get compiled. This patch fixes the Makefile. Signed-off-by: Diego Calleja <diegocg@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4427): Fix V4L1 Compat for VIDIOCGPICT ioctlMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4419): Turn on the Low Noise Amplifier of the Samsung tuners.Hans Verkuil
Without the LNA these tuners perform very poorly (read 'unwatchable') when the signal is weak. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4418): Fix broken msp3400 module option 'standard'Hans Verkuil
Due to a wrong statement order the 'standard' module option didn't work for 'G' model chips. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4416): Cx25840_read4 has wrong endianness.Hans Verkuil
cx25840_read4 assembled the bytes in the wrong order. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4411): Fix minor errors in build filesTrent Piepho
In pwc Kconfig, change 'depends' to 'depends on' In dvb-core Makefile, change '=' to ':=' Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one!Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4399): Fix a typo that caused some compat stuff to not workMauro Carvalho Chehab
Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4395): Restore compat_ioctl in pwc driverLuc Van Oostenryck
The compat_ioctl support of the pwc driver was dropped during the last update of the driver. I suppose it was by mistake. If yes here is the patch to restore the support. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4371a): Fix V4L1 dependencies on compat_ioctl32Mauro Carvalho Chehab
Compat32 should be able to handle V4L1 ioctls if the old API support were selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works betterTrent Piepho
A previous patch changed VBI_OFFSET to match what the datasheets say it should be. However, the bt8x8 datasheets are wrong. The old value of 244 is closer to what is actually observed. The real value appears to not be constant and is different for different chip revisions. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4379): Videodev: Check return value of class_device_register() ↵Trent Piepho
correctly Errors are return values < 0, not != 0. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4373): Correctly handle sysfs error leg file removal in pvrusb2Mike Isely
Take note of which sysfs files / groups that the pvrusb2 successfully creates and only delete those specific items when tearing things down. (Previously we just blindly tore everything down every time.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4368): Bttv: use class_device_create_file and handle errorsTrent Piepho
Revert bttv-driver.c from video_device_create_file() to use class_device_create_file() again. video_device_create_file() is only available when V4L1 is on. Proper error checking is added for failure of class_device_create_file(). Will print error message and unroll partially created sysfs entries. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4367): Videodev: Handle class_device related errorsTrent Piepho
Add proper error checking and roll-back for failure of class_device_create_file() in videodev.c. Print error messages and unroll partially created sysfs entries. Also, failure of class_device_register() in video_register_device() is handled correctly. It was failing to de-allocate the minor number. This must be done in video_register_device(), since the caller has no way of knowing if failure occurred before or after the class device was registered. Also added an error message if video_register_device() is called with an unknown type, which should never happen. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4365): OVERLAY flag were enabled by mistakeMauro Carvalho Chehab
A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video, together with several cx88-blackbird cleanups. This makes the cx88 driver to report: /dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument instead of: /dev/video0 [v4l2]: no overlay support Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 11:27:48 +0000