aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2010-02-26V4L/DVB (13945): Add lost config and PCI ID for card of BeholderDmitri Belimov
Add lost configuration for our TV card. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13944): vivi: Fix test of unsigned in vivi_create_instance()Roel Kluin
video_nr is unsigned so the test did not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: use correct size in put_v4l2_window32()Roel Kluin
Although these sizes may be the same it is better to calculate the size of the source, than the destiny. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13932): em28xx: add PAL support for VBIDevin Heitmueller
Make the VBI support work for PAL standards in addition to NTSC. This work was sponsored by EyeMagnet Limited. Thanks go out to Andy Walls for providing a CD containing test PAL/VBI captures and to Steven Toth for providing a PVR-350 to do signal generation with. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13927): gspca - sonixj: Fix bad video mode for all webcams.Jean-Francois Moine
The bug was introduced when adding the sensor adcm1700. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13926): gspca - pac7302: Fix a random USB error.Jean-Francois Moine
When loading the register 0x49 of the page 3, the usb_control_msg() sometimes fails with error -71 or -62. This change skips loading the register 0x48. Tested-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13925): gspca - main: Change the check of the USB video interface.Jean-Francois Moine
Some webcams have many interfaces with the same interface class, so the previous interface check did not work. The new code checks if the interface number is zero or the only one. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13924): gspca - sunplus: Optimize and remove unused sequences.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13923): gspca - zc3xx: Simplify code.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13922): gspca - zc3xx: Switch off the LED on resume.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13921): gspca - zc3xx: Remove unuseful register write.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13920): gspca - zc3xx: Let default sharpness for sensor pas202b.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13919): gspca - zc3xx: Fix hdcs2020 probe.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13918): gspca - zc3xx: Rename the USB sequences.Jean-Francois Moine
The new names tell the image resolution: 'Scale' is the smaller image. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13917): gspca - zc3xx: Cleanup code.Jean-Francois Moine
- update copyright and module author - change __u8/16 to u8/16 - set unsigned the sd sensor - initialize the controls by macros Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13915): em28xx: fix a typo on RC6 modesMauro Carvalho Chehab
Thanks to: Devin Heitmueller <dheitmueller@kernellabs.com> for double checking it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13913): saa7127: Add support for generating SECAM output for the ↵Andy Walls
SAA712[89] chips This change fixes up saa7127_s_std() generate SECAM out, if the user has requested a 50 Hz video standard set that only contains a request for SECAM standards and not PAL. Only the SAA712[89] chips can generate SECAM, the SAA712[67] chips cannot. I was unclear on the burst start and end values - I couldn't figure out the units - so I left them the same as for the PAL systems. A the video decoders on both a PVR-350 (SAA7115) and an HVR-1600 (CX23418) identify the SECAM signal generated by a SAA7129 with this patch as SECAM. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13912): cx18: Fix tuner reset pin in card entry for the Leadtek PVR2100Sergey Bolshakov
Fix the "xceive_pin" setting from "15" to "1" for the PVR2100 -- the same as the PVR3100H. This properly resets the XC2028 tuner on the PVR2100. Sergey's original email report: Hi. Seems cx18 module has incorrect .xceive_pin value for card, as i see lots of i2c errors in dmesg from xc2028. i'm using 2.6.32.2, my hardware is: 00:09.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a] Subsystem: LeadTek Research Inc. Device [107d:6f27] Flags: bus master, medium devsel, latency 64, IRQ 17 Memory at f0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: cx18 Kernel modules: cx18 Following fixes this problem for me, the rest seems working: Reported-by: Sergey Bolshakov <sbolshakov@altlinux.ru> Tested-by: Sergey Bolshakov <sbolshakov@altlinux.ru> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13910): cx18: Fix set indextable command to properly select I/P/B ↵Andy Walls
index entries The CX18_CPU_SET_INDEXTABLE command was being called with the wrong number of arguments causing the index table frame type selection mask to be set wrong. Now the IDX stream properly sends entries for I, P, and B frames. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13909): cx18: Clean up dead code from ivtv once used for IDX processingAndy Walls
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13908): cx18: Add initial working VIDIOC_G_ENC_INDEX ioctl() supportAndy Walls
VIDIOC_G_ENC_INDEX support see the light of day. Some notes: 1. With default capture parameters, the CX23418 seems to transfer 192 index entries (4.5 kB worth) at 10 second intervals. 2. Index streams don't seem to be supported for MPEG 2 TS streams 3. The index entries seem to claim every frame is a B-Frame. Possible firmware bug. 4. The cx18 driver does not try to capture an index stream when inserting sliced VBI into the MPEg stream as the offsets would need fixup. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13907): cx18: Perform automatic rotation of very old, unread IDX ↵Andy Walls
buffers According to the v4l2 spec, very old MPEG index entries needs to be discarded in favor of newer index entries. This change ensures the firmware always has buffers for index entries at the expense of the oldest unread buffers. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13906): cx18: Start IDX streams automatically as an internal ↵Andy Walls
associated stream This change starts the IDX stream along with the MPG stream as an internal use (only) stream much like the VBI stream can be started as an internal use stream for inserting sliced VBI packets. The IDX stream is not started automatically with an MPEG strem if the IDX stream is disabled (no buffers allocated) or if sliced VBI insertion is being performed by the cx18 driver. The cx18 driver doing sliced VBI insertion makes the offsets in the IDX stream inaccurate for the final MPEG stream presented to user space. Since fixing the IDX offsets ourselves is not easy and we cannot easily do what ivtv does to fix the offsets, we'll make sliced VBI insertion and MPEG Index capture mutually exclusive for now. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13905): cx18: Allow MPEG index streams to be started and stopped ↵Andy Walls
internally This change allows the IDX stream to be started and stopped as any other stream even though it has no associated device node. This is needed for cx18 driver internal use. Also always tell the CX23418 to generate index entries when an analog capture starts and the IDX stream has had buffers allocated (i.e. is enabled). Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13904): cx18: Fix TS and IDX stream buffer memory leak on module unloadAndy Walls
Fix a long standing memory leak of stream buffers for streams that did not have a struct video_device allocated: namely the TS and IDX streams. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13903): cx18: Encapsulate check for a stream being enabled into an ↵Andy Walls
inline function Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13902): cx18: Update MPEG Index stream buffers module option processingAndy Walls
Update the module options related to INDEX stream buffer allocation. A single CX2341[5678] index entry is only 24 bytes. Large buffers for the IDX stream will prevent the CX23418 from transferring index data over at all. Buffers of around 1.5 kB or 64 index entries seem to be just fine. We'll default to 63 buffers/MDLs as that is the firmware limit per stream and IDX stream buffers are not high rate. There is no reason on earth to allocate the previous 1 MB default of buffer space for the IDX stream. This is in anticipation of implementing the G_ENC_INDEX ioctl() in the cx18 driver. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13899): gspca - all subdrivers: Make control descriptors constant.Marton Nemeth
The ctrls field of struct sd_desc is declared as const in gspca.h. It is worth to initialize the content also with constant values. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13898): gspca - some subdrivers: Make sd_desc const.Márton Németh
The function callbacks in sd_desc are defined at compile time and they do not change at runtime. Make the sd_desc initializations const. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13897): gspca - main: Check the interface class at probe time.Jean-Francois Moine
The USB video interface was checked as having the number zero, but some webcams have other values. The test is now done on the interface class which may be either 255 (vendor spec) or 0 (class per interface). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13896): gspca - zc3xx: Adjust the pas202b exchanges.Jean-Francois Moine
- adapt the start sequences from the info file of the ms-win driver of the webcams 046d:08a2/046d:08aa (lvWIMv.inf) - disable the brightness for this sensor Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13895): gspca - zc3xx: Fix the contrast control.Jean-Francois Moine
The previous calculation gave bad gamma tables. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13894): gspca - sonixj: Add more controls.Jean-Francois Moine
- sharpness - brightness for adcm1700 - adjust brightness/exposure for adcm1700 - add some comments Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13893): gspca - vc032x: Change the sensor of 046d:0892 and 046d:0896.Jean-Francois Moine
- new sensor POxxxx (unknown ID) - no probe - new controls - table for the disabled controls Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13892): gspca - vc032x: Add the H and V flip controls for sensor ↵Jean-Francois Moine
mi1320. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13891): gspca - vc032x: Fix bad probe of the sensor mi1320.Jean-Francois Moine
- have 2 tables for sensor probe - with the same ID, the sensor mi1320 is found with the bridge vc0321, the sensor mi1320_soc with the bridge vc0323 - add some comments Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13885): zr364xx: fix support for Aiptek DV T300Antoine Jacquet
Added a new initialization method for Aiptek DV T300. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13708 Tested-by: Hámorszky Balázs <balihb@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13883): gspca - m5602: Be less verbose during sensor probeErik Andrén
Currently all probed sensor types are emitted in the kernel log, generating unnecessary noise. Be less verbose and only report what sensor is found (if any) Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13881): gspca - stv06xx: Clean up the dump bridge functionErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13872): gspca - sonixj: Add sensor adcm1700 and webcam 0c45:614a.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13871): gspca - benq: New subdriver for camera 04a5:3035.Jean-Francois Moine
Tested-by: Francesco Lavra <francescolavra@interfree.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13870): gspca - zc3xx: Bad detection of sensor HV7131R(c).Jean-Francois Moine
The webcam 0ac8:303b may have the sensors HV7131B or HV7131R(c). This changeset checks the HV7131 type. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13867): gspca - zc3xx: Add one more chipset ID of tas5130K.Luis Maia
This ID was found in a webcam 0ac8:301b. Signed-off-by: Luis Maia <lmaia@royalhat.org> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13866): gspca - main: Add the cam flag 'no_urb_create'.Jean-Francois Moine
This flag permits subdrivers to create specific transfer URBs. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13865): gspca - main: Optimize code.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13838): atbm8830: use AGC setting from configDavid Wong
Improves ATBM8830 reception by using per card AGC configuration rather than register default. Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13830): uvcvideo: add another YUYV format GUID for iSight camerasDaniel Ritz
For some unknown reason, on a MacBookPro5,3 the iSight sometimes report a different video format GUID. This patch add the other (wrong) GUID to the format table, making the iSight work always w/o other problems. What it should report: 32595559-0000-0010-8000-00aa00389b71 What it often reports: 32595559-0000-0010-8000-000000389b71 Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13828): uvcvideo: Make the quirks module parameter override the ↵Laurent Pinchart
built-in quirks The quirks module parameter is or'ed with the built-in quirks for the device being probed. This make it impossible to disable a built-in quirk without recompiling the driver. Replace the built-in quirks with the quirks module parameter instead of or'ing the values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13827): uvcvideo: Switch to a monotonic clock for V4L2 buffers ↵Laurent Pinchart
timestamps The realtime clock provided by do_gettimeofday() is affected by time jumps caused by NTP or DST. Furthermore, preliminary investigation showed that SMP systems the realtime clock is based on the CPU TSC, and those could get slightly out of sync, resulting in jitter in the timestamps depending on which processor handles the USB interrupts. Instead of the realtime clock, use a monotonic high resolution clock to timestamp the buffer. As this could in theory introduce a regression with some userspace applications expecting a realtime clock timestamp, add a module parameter to switch back to the realtime clock. Thanks to Paulo Assis for pointing out and investigating the issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13815): gspca - sunplus: Add webcam 052b:1507.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 17:17:23 +0000