aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2009-05-09V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value at a varMauro Carvalho Chehab
/home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init': /home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11679): cafe_ccic: fix sensor detectionHans Verkuil
Due to an uninitialized chip.ident field the chip identification failed. Thanks-to: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusionHans Verkuil
V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have been used. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11674): ivtv: fix incorrect bit testsHans Verkuil
Found the coccinelle tool. Thanks-to: Julia Lawall <julia@diku.dk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11669): uvc: fix compile warningHans Verkuil
The 2.6.30 kernel generates this warning: uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function I guess some new warning flag must have been turned on since this warning didn't appear with older kernels (gcc version 4.3.1). It's also a bogus warning, but since this code didn't comply to the coding standard anyway I've modified it to 1) remove the warning and 2) conform to the coding standard. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11668): ivtv: fix compiler warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500Steven Toth
The boards control struct wasn't updated when (presumably) all of the other drivers migrated from using scode_table to specifying the demod. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing fields/paddingTrent Piepho
Some ioctls have structs that are a different size depending on what type of buffer is being used. If the buffer type leaves a field unused or has padding space at the end, this space should be zeroed out. The problems with S_FMT and REQBUFS were original identified and patched by Marton Nemeth <nm127@freemail.hu>. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead of try_fmtTrent Piepho
For a number of different ioctls, the v4l2-ioctl code checks that the passed buffer type is supported by the driver. It did this by checking that the driver defined a method for the try_fmt handler for that buffer type. However, try_fmt is optional and a driver might not provide it even though it does support that type. So use g_fmt instead, since that isn't optional. This should fix a problem with VBI capture with saa7146. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11660): zoran: fix bug when enumerating format -1Trent Piepho
If someone requests a format at fmt->index == (unsigned)-1 and the first format in the array doesn't have the requested type then num will still be -1 when it's compared to fmt->index and there will appear to be a match. Restructure the loop so this can't happen. It's simpler this way too. The unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin <roel.kluin@gmail.com> is removed this way too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11575): uvcvideo: fix uvc resume failedMing Lei
Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume, instead of zero. This version uses round down to return packet counts on Linus' suggestions, or else may lead to buffer destructed if packet size is changed before calling uvc_alloc_urb_buffers() in this kind of case. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.Devin Heitmueller
A regression was introduced in hg changeset 33810c734a0d, which resulted in a kernel panic whenever the device was disconnected from USB. The call to 4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a pointer to the v4l2_device instead of the au0828_dev structure. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual ExpressChristopher Pascoe
Two fixes for DViCO FusionHDTV DVB-T Dual Express: * Reset correct tuner when reinitializing xc3028. * Disable the I2C gate control to avoid locking up the I2C bus. Tested-by: John Knops <jknops@australiaonline.net.au> Reviewed-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au> Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PMSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11570): patch: s2255drv: fix race condition on set modeDean Anderson
set_modeready flag must be set before command sent to USB in s2255_write_config. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11568): cx18: Fix the handling of i2c bus registration errorJean Delvare
* Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-freeDan Carpenter
I lowered the kfree(t) down a couple lines and removed the superflous "t->vdev = NULL;" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leakDan Carpenter
I moved the kfree() down a couple lines. t->vdev is going to be in freed memory so there is no point setting it to NULL. I added a kfree(t) on a Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494a): cx231xx Kconfig fixesMauro Carvalho Chehab
selecting ALSA module breaks if !SND. Just remove select. While here, let's fix the whitespacing at the Kconfig. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494): cx18: Send correct input routing value to external audio ↵Andy Walls
multiplexers A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: pwc : do not pass stack allocated buffers to USB core. USB: otg: Fix bug on remove path without transceiver USB: correct error handling in cdc-wdm USB: removal of tty->low_latency hack dating back to the old serial code USB: serial: sierra driver bug fix for composite interface USB: gadget: omap_udc uses platform_driver_probe() USB: ci13xxx_udc: fix build error USB: musb: Prevent multiple includes of musb.h USB: pass mem_flags to dma_alloc_coherent USB: g_file_storage: fix use-after-free bug when closing files USB: ehci-sched.c: EHCI SITD scheduling bugfix USB: fix mos7840 problem with minor numbers USB: mos7840: add new device id USB: musb: fix build when !CONFIG_PM USB: musb: Remove my email address from few musb related drivers USB: Gadget: MIPS CI13xxx UDC bugfixes USB: Unusual Device support for Gold MP3 Player Energy USB: serial: fix lifetime and locking problems
2009-04-24radio_si470x: Fix free memory corruptionAlan Cox
The release path for a disconnected device frees the object then unlocks the mutex in the freed object... Found by Dan Carpenter using Smatch Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-23USB: pwc : do not pass stack allocated buffers to USB core.Martin Fuzzey
This is causes problems on platforms that have alignment requirements for DMA transfers. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: add reset endpoint operationsDavid Vrabel
Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-10Merge git://git.infradead.org/~dwmw2/firmware-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/firmware-2.6: qla1280: Fix off-by-some error in firmware loading. Add README.AddingFirmware file. Basically telling people not to. firmware: Remove newly-added slicoss and sxg firmware images firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw ALSA: wavefront - Always use request_firmware() Remove fdump tool for av7110 firmware firmware: convert av7110 driver to request_firmware() Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card" Revert "fix modules_install via NFS" Add-add conflicts in firmware/WHENCE fixed manually
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06cx231xx: Convert to snd_card_create()Mauro Carvalho Chehab
Convert from snd_card_new() to the new snd_card_create() function. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11440): PWC: fix build error when CONFIG_INPUT=mRandy Dunlap
Fix build errors when USB_PWC=y and INPUT=m. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11439): UVC: uvc_status_cleanup(): undefined reference to ↵Randy Dunlap
`input_unregister_device' Fix build errors when USB_VIDEO_CLASS=y and INPUT=m. Fixes kernel bugzilla #12671. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11438): au0828: fix Kconfig dependanceAlexander Beregalov
Fix this build error: ERROR: "videobuf_queue_vmalloc_init" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "videobuf_vmalloc_free" [drivers/media/video/au0828/au0828.ko] undefined! ERROR: "videobuf_to_vmalloc" [drivers/media/video/au0828/au0828.ko] undefined! Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11437): pvrusb2: Drop client_register/unregister stubsJean Delvare
The client_register and client_unregister methods are optional so there is no point in defining stub ones. Especially when these methods are likely to be removed soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11436): radio-mr800: convert to to v4l2_deviceAlexey Klimov
radio-mr800: convert to to v4l2_device. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11435): dsbr100 radio: convert to to v4l2_deviceAlexey Klimov
dsbr100: convert to v4l2_device. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB: zr364xx: remove unused #include <version.h>Huang Weiyi
Remove unused #include <version.h> in drivers/media/video/zr364xx.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB: usbvision: remove unused #include <version.h>Huang Weiyi
Remove unused #include <version.h> in drivers/media/video/usbvision/usbvision-i2c.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11427): gspca - m5602: Minor cleanupsErik Andr?n
Remove an unnecessary error check and reorder some code. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11426): gspca - m5602: Don't touch hflip/vflip register on ↵Erik Andr?n
Read/Modify/Write Touching the hflip/vflip register while doing the read/modify/write corrupts the image. Just read from the sensor ctrl cache instead and all is good. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.Erik Andr?n
The vflip quirk is better checked at probe time as it's only needed once. Also add an extra reset at init time to resolve a suspend to ram regression. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust ↵Erik Andr?n
image on vflip. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl ↵Erik Andr?n
cache ctrl. Reading and writing to a register doesn't always work reliably. Add a cache and ensure that it is deallocated properly upon module disconnect. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a defineErik Andr?n
Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.Erik Andr?n
Previously all resolution setting was done with precalculated tables. When the image is vflipped we need to adjust the alignment which would require another table. Now we can adjust the parameters on the fly instead. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driverErik Andr?n
Some errors were not propagated properly. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.Erik Andr?n
ov9650: Reading the COM1 register corrupts the image. Decrease the granularity of the exposure and limit its upper range as setting such high values doesn't have any effect on the image. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by defaultErik Andr?n
Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by defaultErik Andr?n
Autogain is on by default, properly set the default value in the v4l2 ctrl. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11416): gspca - m5602: Constify all sensor structsErik Andr?n
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11415): gspca - m5602: Remove an unused member in the sd struct.Erik Andr?n
Remove an unused sd struct member. Remove a redundant define while we're at it. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11414): gspca - m5602-mt9m111: Move v4l2 controls to main sensor file.Erik Andr?n
Move over the v4l2 controls to the sensor specific source file. Remove the now redundant sensor struct member. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11413): gspca - m5602-mt9m111: Separate mode vectors per sensor.Erik Andr?n
By separating the supported for each sensor into a separate vector we can eliminate the nmodes variable and instead calculate it at runtime. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>