aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6894): xc5000: fix build warningMichael Krufky
Fix the following build warning: xc5000.c:560: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' On many architectrues size_t is unsigned long, and may not be printed with %d. Use %Zu instead. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6893): tuner-xc2028: fix xc2028_attach functionMichael Krufky
xc2028_attach was returning an integer when disabled from the build, where it should instead be returning NULL. Declare xc2028_attach as type dvb_frontend * instead of void *. The prototype declaration must be marked as extern in the header. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6892): xc5000: fix build when DVB_TUNER_XC5000 is disabledMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6890): tda18271: fix typo in RF tracking filter calibrationMichael Krufky
We want to set bits 1 & 2 on easy programming byte 4, not extended byte 4. Thanks to David Wong for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: David Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6888): Add Hauppauge tuner type 150 defintionSteven Toth
Add Hauppauge tuner type 150 defintion. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6887): Avoid 'unknown model' message for the HVR1500-QSteven Toth
Avoid 'unknown model' message for the HVR1500-Q Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6886): xc5000: Cleanups of types, result codes etcSteven Toth
This translates much of the xceive coding style, adds some result codes and generally cleans up whitespace and function arguments. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6885): Add support for the Hauppauge HVR1500QSteven Toth
The express card ATSC/QAM tuner. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6884): Add support for the Xceive xc5000 silicon tunerSteven Toth
This is an all formats tuner, QAM, ATSC, DVB-T and others. Only ATSC and QAM have been tested. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6882): dvb_frontend: release analog demod in dvb_frontend_detachMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6881): include struct analog_demod_ops directly inside struct ↵Michael Krufky
dvb_frontend Rather than using a pointer, include struct analog_demod_ops directly inside struct dvb_frontend. This will allow us to use dvb_attach in the future, along with removing the need to check the ops structure before having to check the pointer to the method being called. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6880): kill tuner-driver.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6879): move struct analog_tuner_ops into dvb_frontend.hMichael Krufky
struct analog_tuner_ops no longer has any dependencies specific to v4l2, so we can move this into dvb_frontend.h with the rest of the tuning structures. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6878): tuner: remove extraneous variable declarationMichael Krufky
tuner_count is already declared as "extern unsigned const int" in <media/tuner-types.h> -- Remove it from tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6875): tuner-xc2028: ATSC requires 1.75 MHz tuning offsetMichael Krufky
In my testing yesterday, I was using a scan file tailored specifically for a unique test situation -- As it turns out, this scan file was bad, and I will use the one included inside dvb-apps for testing for now on. I've tested with other ATSC tuners just to confirm, using: us-ATSC-center-frequencies-8VSB Anyhow, as it turns out, the tuner-xc2028 *does* require a tuning offset for ATSC. Even though the linux-dvb api passes in center frequencies from userspace, apparantly the xceive firmware is already factoring in the tuning offset to center. In order to make the device function using the same scan files / channels.conf configurations as other atsc devices, we must offset by 1.75 MHz. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6874): removes duplicated KERN_DEBUG flags from dprintk calls in ↵Matthias Schwarzott
mt312.c do { \ if (debug) printk(KERN_DEBUG "mt312: " args); \ } while (0) So no caller need to specify KERN_DEBUG. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6873): Fixes issues listed by checkpatchMatthias Schwarzott
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6869): cs5345: new i2c driverHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6867): saa7127: CodingStyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6866): msp3400: CodingStyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6865): vp27smpx: CodingStyle cleanupHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6864): upd64031a: CodingStyle cleanupHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6863): upd64083: CodingStyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6862): ivtv: really remove i2c legacy support from drivers that no ↵Hans Verkuil
longer need it For some reason the include header wasn't changed from v4l2-i2c-drv-legacy.h to v4l2-i2c-drv.h in the previous patch. This is now corrected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6861): cx2341x: command argument should be u32 instead of intHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6860): tveeprom: CodingStyle cleanupHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6859): tveeprom: add support for Hauppauge models 74xxxHans Verkuil
Thanks to Steve Toth from Hauppauge with providing me with the information needed to add support for these models. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6858): Fix offset for ATSCMauro Carvalho Chehab
ATSC works with offset=0 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6857): cx23885: correctly join I2C writes and reads from same addressChris Pascoe
When an I2C message specifies a write then a read from the same I2C address, we need to tell the chip to not release the bus between the message parts. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6856): zl10353: improve tuning parameters and update register mapChris Pascoe
Some more I2C traces and a experimentation with register values on both the ZL10353 and MT352 mean that I can now guess at what more of the ZL10353 registers do. Guess at the registers' names (based on the equivalent names in MT352) and update set_parameters/get_parameters with the new knowledge. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6855): xc2028: select DTV78 firmware if tuning 7MHz VHF / 8MHz UHFChris Pascoe
It seems that the DTV78 firmware is intended for use in locations where VHF channels have 7MHz bandwidth and UHF channels have 8MHz bandwidth. If we switch to DTV78 firmware when we detect this condition, we can avoid firmware reloads when switching between VHF and UHF transponders. Place the state for this in the control structure so that card drivers can hint to us to use DTV78 firmware from the first tuning attempt. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6854): xc2028: be more specific about when applying offset for 7MHz ↵Chris Pascoe
channels We have been inserting a mystery 500kHz offset for tuning 7MHz channels, however some experimentation reveals it is only needed under certain conditions with specific firmware combinations. Document these and only apply the offset when we know it is required. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6853): xc2028: check HAS_IF flag against tableChris Pascoe
When searching for the right S-Code table to load, check the HAS_IF flag against the firmware we are checking instead of against the the "type" requested. We already ignore the scode type requested if the caller passed an int_freq; this makes the search by frequency consistent with that behaviour. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6852): xc2028: s-code offset should not modify internal control ↵Chris Pascoe
structure Don't modify the control structure that was provided at attach when applying an offset to the S-Code, otherwise it will be incorrect on subsequent tunes. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6851): xc2028: include int_freq in firmware version displayChris Pascoe
Add "int_freq" to the debugging output when selecting firmware and the HAS_IF flag when dumping firmware during load. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (em28xx): Add support for Pinnacle Dazzle DVC 100Aurelien Jarno
The patch below adds the "Pinnacle Dazzle DVC 100" to the list of cards supported by the em28xx driver. As the configuration is the same as the DVC 90 one, it simply adds a new USB ID to the list of devices supported by the DVC 90 configuration. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6848): bttv: check pci_register_driver() errorAkinobu Mita
Check pci_register_driver() error in module_init. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6846): tda9887: initialize mode to T_STANDBY at startupMichael Krufky
Ensure that the audio is muted at attach-time Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6845): tuner: remove unneeded #includes from tuner-driver.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6844): tuner: remove struct tuner from tuner-driver.hMichael Krufky
struct tuner holds state for tuner-core, only -- move it into tuner-core.c Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6843): tda9887: use printk macros from tuner-i2c.hMichael Krufky
replace tda9887_info and tda9887_dbg printk macros with tuner_info and tuner_dbg, defined in tuner-i2c.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6842): tda9887: remove dependency on struct tunerMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6841): tda9887: maintain private state independent of struct tunerMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6840): tuner: convert tda9887 to use TUNER_SET_CONFIGMichael Krufky
Use TUNER_SET_CONFIG to set configuration in tda9887's private state structure, rather than storing tda9887-specific configuration within struct tuner. Update handling of TUNER_SET_CONFIG by tuner-core, to call &t->fe.ops.analog_demod_ops rather than &t->fe.ops.tuner_ops analog_demod_ops.set_config passes the request to tuner_ops.set_config, so this does not break other drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6839): tuner: add set_config to struct analog_tuner_opsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6838): tda9887: remove references to struct tuner from printk macrosMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6837): Convert cx88_input.audioroute to a bitfieldMichael Krufky
Prevent us from wasting some extra bytes of memory Thanks to Trent Piepho, for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6836): Fix CodingStyle troubles caused by the previous cx88 commitsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6834): cx88-video: Enable selection of the WM8775 for cx88 cardsFrej Drejhammar
The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO) should select the wm8775 driver, which is used by at least one Conexant 2388x based card (Hauppauge HVR-1300), if VIDEO_CX88 is selected. Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6833): Don't limit cx88 audio routing to blackbird boardsRicardo Cerqueira
All cx2388 boards need the line-in audio to be routed from an external ADC (refered to as "ADC mode" in the spec sheet), since the chip is uncapable of dealing with baseband audio directly. So... this patch enables normal mode when using the tuner (TV or Radio), and enables ADC mode with any other source. It'll probably only work with boards that have supported ADCs (such as the Wolfson wm9775) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 04:43:01 +0000