aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2007-07-30V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d staticAdrian Bunk
The fcv1236d support patch was created before the "dvb: remove static dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't get merged until after the fact. struct dvb_pll_fcv1236d can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixesAdrian Bunk
This patch: - adds a missing error check and - removes an error check that could never be true Both spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5932): Af9005 fix tuner module unloadLuca Olivetti
This patch removes the useless tuner field and avoids a double free of the tuner (either mt2060 or qt1010). Signed-off-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5920): ivtv: fix incorrect fw size report.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.Hans Verkuil
While decoding (MPEG or YUV) is active or when VBI output is in use, then do not clear the VBI output of the saa7127. Only after the last user is gone can we clear it. This fixes the case where playback was stopped, another channel was chosen and playback was restarted, while /dev/vbi16 was used to set the WSS (widescreen) setting. Without this fix the WSS was reset on every stop instead of just keeping the last value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5917): ivtv: improve mailbox responsiveness.Hans Verkuil
First try polling for the result of a mailbox command, then switch to a test/sleep loop. Also reduce the sleep time from 10 ms to 1 ms. Improves the responsiveness of the mailbox handling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5916): ivtv: fix pause/continue/play handlingHans Verkuil
Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5900): usbvision: fix bugs [sg]_register functionsTrent Piepho
s_register was assigning the return code to (unsigned)reg->val, rather than errCode, which it what it would return. Except reg->val can't be < 0, so it would never actually return an error. g_register never actually put the value it read into reg->val. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 supportTrent Piepho
Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5891): zr36067: Turn off raw capture properlyTrent Piepho
When raw capture was turned off, the current capturing frame (v4l_grab_frame) wasn't reset to NO_GRAB_ACTIVE. If capture was turned back on, the driver would think this frame was currently being captured, and wait for it to complete before starting a new frame. The hardware on the other hand would not be actively capturing a frame. The result was the driver would wait forever for v4l_grab_frame to be captured. Some calls to zr36057_set_memgrab(0) were missing spin-locks, which have been added. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5890): zr36067: Add UYVY, RGB555X, RGB565X, and RGB32 formatsTrent Piepho
Add support for the UYVY and the other big endian output formats. The driver was naming formats based on the host endianess. This is different that all the other drivers appear to work and not what software appears to expect. Use ARRAY_SIZE() to find the the size of the zoran_formats array. Change the way the driver handles setting the video format register. Rather than use some if and switch statements to set to register by looking at the format id, the format list simply has a field with the proper bits to set. Adds a bit of ifdef to make a driver without V4L1 support more possible. Also create a macro for defining formats that handles vl41 and/or vl42 support to avoid repeated ifdefs in the format list. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5888): zr36067: Driver was not returning correct image sizeTrent Piepho
The driver was returning the size of the (fixed) buffer it allocated as the sizeimage field in the v4l2 pixel format, rather than the actual size of the image. For example, a 192x128 YUYV image is 49152 bytes but the driver would always return 131072 bytes since if that was the size of the v4l buffer. This violates the v4l2 spec, which says that sizeimage should be the actual size of the image for uncompressed formats. It also caused mplayer to crash. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5887): zr36067: Fix poll() operationTrent Piepho
During uncompressed capture, the poll() function was looking the wrong frame. It was using the frame the driver was going to capture into next (pend_tail), when it should have been looking at the next frame to be de-queued with DQBUF/SYNC (sync_tail). It also wasn't looking in the right spot. It was looking at the file handle's copy of the buffer status, rather than the driver core copy. The interrupt routine marks frames as done in the driver core copy, the file handle copy isn't updated. So even if poll() looked at the right frame, it would never see it transition to done and return POLLIN. The compressed capture code has this same problem, looking in fh->jpg_buffers when it should have used zr->jpg_buffers. There was some logic to detect when there was no current capture in process nor any frames queued and try to return an error, which ends up being a bad idea. It's possible to call select() from one thread while no capture is in process, or no frames queued, and then start a capture or queue frames from another thread. The buffer state variables are protected by a spin lock, which the code wasn't acquiring. That is fixed too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5886): zr36067: Fix problem setting normsTrent Piepho
The zr36067 driver doesn't make a distinction between the different sub-types of NTSC, PAL, or SECAM norms. For example, when the enum std ioctl returns the PAL standard it returns PAL_BG|PAL_DK|PAL_H|PAL_I. When setting the norm, it required the bitmask to match exactly the set of norms used during the enumeration. If just one norm was specified, for example PAL_BG or NTSC_M, it would fail. This violates the V4L2 spec, "VIDIOC_S_STD accepts *one* or more flags..." The key thing to realize is that V4L2_STD_PAL is not one bit, it is multiple bits. It's ok to call S_STD with any *one* of those bits, but the driver was requiring *all* of them. This fixes the S_STD function so that it will accept any set of one or more PAL norms as PAL, and the same for NTSC and SECAM. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-26more VIRT_TO_BUS dependenciesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading moduleHans Verkuil
State struct was never freed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5877): radio-gemtek-pci: remove unused structure memberTrent Piepho
The drivers reads the PCI subsystem ID into its state structure, but it's never used anywhere. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5871): Conexant 2388x: check for kthread_runCyrill Gorcunov
The patch adds checking of kthread_run return code and issues a message if it fails. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next.Hans Verkuil
If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it should check whether the passed control ID is valid and return 0 if it isn't. Otherwise a for-loop over the control IDs will never end. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another streamHans Verkuil
The VBI DMA is handled in a special way and is marked with a bit. However, that bit was set at the wrong time and could be cleared by mistake if a PCM (or other) DMA request would arrive before the VBI DMA was completed. So on completion of the VBI DMA the driver no longer knew that that DMA transfer was for VBI data. And this in turn caused havoc with the card's DMA engine. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffiesMauro Carvalho Chehab
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam driversMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeoutMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C driversMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio driversMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5854): ivtv: cleanup of driver messagesHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5852): ivtv: don't recompile needlesslyAlexey Dobriyan
Driver prints banner including kernel version. Was a leftover from when the driver was standalone. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config optionHans Verkuil
I2C_ALGOBIT must also be selected when ivtv is selected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5850): ivtv: improve API command debuggingHans Verkuil
Turn off debugging of API commands that occur during encoding or decoding, unless they are explicitly requested. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5848): Av7110: fix typoYoann Padioleau
Parse error in ifdef or bad use of macro. Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18V4L/DVB (5847): Clean up schedule_timeout calls in cpia2 and ivtv codeRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5846): Clean up setting state and scheduling timeoutsRobert P. J. Day
Replace assignments to "current->state" with the preferred calls to schedule_timeout_interruptible(). Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5844): ivtv: add high volume debugging flagHans Verkuil
Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5843): ivtv: fix missing signal_pending check.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5842): ivtv: Add locking to ensure stream setup is atomic.Hans Verkuil
Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5841): tveeprom: add support for Philips FQ1216LME MK3 tuner.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5840): fix dst and cx24123: tune() callback changed signess for delayMauro Carvalho Chehab
tune() dvb_frontend callback changed delay signess: int (*tune)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, unsigned int mode_flags, - int *delay, + unsigned int *delay, This change caused warnings on cx24123 and dst modules: /home/v4l/master/v4l/cx24123.c:1034: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1782: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1808: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1837: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1860: warning: initialization from incompatible pointer type This patch corrects the function prototype on both modules to follow the core change. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5838): dvb-core: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)Oliver Endriss
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5837): stv0299: Fix signedness warning (gcc 4.1.1, kernel 2.6.22)Oliver Endriss
Fix signedness warning (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5836): dvb-ttpci: re-initialize aspect ratio and pan scan after arm ↵Oliver Endriss
crash Re-initialize aspect ratio and pan scan after arm crash. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, ↵Oliver Endriss
kernel 2.6.22) Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5834): dvb-core: fix signedness warnings and const strippingTrent Piepho
Make some pointers const, and then delete some now unnecessary casts, which were the wrong signedness anyway, being used to strip the const from another pointer. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5832): ir-common: optimize bit extract functionTrent Piepho
New code is simpler, shorter, compiles to about half the size, and is 2 to 4 times faster depending on how many bits in the mask are set. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5831): stradis: use ARRAY_SIZETrent Piepho
sizeof(palette2fmt) / sizeof(u32) => ARRAY_SIZE(palette2fmt) Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5829): Firmware extract and loading for opera dvb-usb updateMarco Gittler
Better way of creating and loading the firmware used. Update for get_dvb_firmware script to extract the files for opera usb-box Help file for creating the firmware added Signed-off-by: Marco Gittler <g.marco@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5828): Kconfig: Added GemTek USB radio and removed experimental ↵Douglas Schilling Landgraf
dependency. Added GemTek USB radio and removed experimental dependency. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>