aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2007-04-27V4L/DVB (5548): Fix v4l2 buffer to the lengthLuc Saillard
Set the length of the v4l2 buffer to the length of the mapped memory. This should fix the problem with amsn. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5547): Add ENUM_FRAMESIZES and ENUM_FRAMEINTERVALS ioctlsLuc Saillard
This patch add support for the VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctl. * check if the maximum native framesize for raw mode is correct * raw mode framerates for all three chipset types Signed-off-by: Gregor Jasny <gjasny@web.de> Signed-off-by: Luc Saillard <luc@saillard.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5546): Radio-terratec.c Replace tt_do_ioctl to use video_ioctl2Douglas Landgraf
Convert radio-terratec to use video_ioctl2 Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5545): Saa7146: Release capture buffers on device closeHartmut Birr
If the video device (saa7146 on a FF card) was open for capturing, the close call didn't release the capture buffers. Signed-off-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE ↵Hartmut Birr
V1.0 card Make the inversion setting configurable. The KNC ONE V1.0 uses non inverted setting for the inversion and add the KNC ONE V1.0 card. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5543): Tda10023: Add support for frontend TDA10023Hartmut Birr
Add support for the frontend TDA10023 and add cards that need the tda10023. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Georg Acher <acher@in.tum.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-CHartmut Birr
Remove the polarity switching of the clock for the DVB-C cards in budget-av.c. This hack is no longer necessary because the saa7146 can do the job to remove the additional FEC bytes from the TS. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5541): Radio-zoltrix.c Replace zol_do_ioctl to use video_ioctl2Douglas Landgraf
Convert radio-zoltrix to use video_ioctl2 Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5540): Radio-trust.c Replace tr_do_ioctl to use video_ioctl2Douglas Landgraf
Convert radio-trust to use video ioctl2 Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5539): Radio-rtrack2.c Added VIDIOC_[GS]_AUDIO and VIDIOC_[S|G]_INPUTDouglas Landgraf
Implements VIDIOC_[GS]_AUDIO and VIDIOC_[S|G]_INPUT on radio-rtrack2 Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5530): Usbvision: remove CustomDevice facilityThierry MERLE
usbvision has a module parameter that ables the user to add a new USB entry at driver load. This functionality is useless by experience (adding statically the entry is easy). Furthermore, the USB_DEVICE(0xfff0, 0xfff0) USB entry caused usbvision_probe to be called for all unclaimed devices. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Acked-by: Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5534): Radio-rtrack2.c Replace rt_ioctl to use video_ioctl2Douglas Landgraf
Convert radio-rtrack2 to use video_ioctl2 Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5532): Add support for Opera S1- DVB-USBMarco Gittler
This patch adds support for DVB-Opera S1 USB 2.0 BOX. Signed-off-by: Marco Gittler <g.marco@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5529): Usbvision: remove not needed TUNER_SET_TYPE_ADDR callThierry MERLE
usbvision_i2c: remove TUNER_SET_TYPE_ADDR call in attach_inform since it is done by tuner_core. Acked-by: Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5528): Usbvision: reverting some i2c cleanupsThierry MERLE
usbvision-i2c.c: reverting some i2c cleanups in order to recover a safe state. Acked-by: Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5526): Cx88-alsa.c: Use kzallocvignesh.babu@wipro.com
Replacing kmalloc/memset combination with kzalloc. Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5525): Usbvision: fix confusion over 7-bit vs 8-bit TDDA9887 addressesTrent Piepho
The code was testing an 8-bit address against a 7-bit address. Will the confusion of the two never cease? Biggest flaw of the I2C protocol: the R/W bit is the LSB instead of the MSB. No one can ever agree if addresses are 7-bits and the R/W bit follows them, or if they are 8-bit and the R/W bit is OR-ed into the address byte. If the R/W bit was first, it wouldn't make any difference! Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5513): Bt878: prevent probing wrong card entryAkinobu Mita
I got strange message when I did modprobe bt878: bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions. The card_list array is terminated by sentinel entry. But this list is traversed by: for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) { ... } in bt878_probe(). So this loop checks dummy sentinel entry, too. This patch removes unnecessary sentinel entry. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5524): Usbvision: fix TDA9887 detectionThierry MERLE
- Adding 0x86 as possible I2C addresses for TDA9887 to call TUNER_SET_TYPE_ADDR. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5523): Usbvision: fix a debug message in usb probe functionThierry MERLE
- change a printk to PDEBUG when USB probe detects an unknown device. This will avoid a message log from usbvision when an unclaimed device is inserted. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5522): Usbvision: i2c function cleanupsThierry MERLE
usbvision-i2c function renamings, code cleanup Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5521): Usb_get_dev were called twice. Removing the extra call.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5520): Add support for the extra keys in the black Technotrend 1500 IRVille-Pekka Vainio
It has come to my knowledge that the Technotrend 1500 DVB cards have been sold bundled with at least two different kinds of remotes, a grey one and a black one. This patch adds support for the extra keys in the black remote to ir-keymaps.c. Signed-off-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5518): Fix a bug on device detectionMauro Carvalho Chehab
Thanks to: Thierry MERLE <thierry.merle@free.fr> for pointing this Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5517): Usbvision: store the device database more efficientlyTrent Piepho
One bit wide bitfields need to declared unsigned to have the range 0 to 1, or they have the range -1 to 0. A few techniques to reduce the driver's size by about 1700 bytes on ia32, probably more on x86-64. Put the biggest fields first, less padding is necessary that way. Put fields with a limited range into a smaller type. For example VideoChannels will fit in 3 bits, and TunerType can use 8 bits. Vin_Reg1, Vin_Reg2, and Dvi_yuv define values for 8-bit registers, but they can't just go into an 8-bit field with no changes, since -1 was used as a flag to indicate a value was not present. So what we do is create a one-bit flag for each one to indicate if a value is or is not present. This only takes 9 bits and has the added advantage that when the register isn't overridden (Vin_Reg[12] never are) it doesn't need to appear in the structure definition since the default value for the flag will be zero. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5516): Reduce usbvision data sizeMauro Carvalho Chehab
This patch reduces usbvision driver on about 1Kb on i386 over the original version with the old struct: text data bss dec hex filename 52312 11848 60 64220 fadc old/usbvision.ko 52474 10708 60 63242 f70a new/usbvision.ko Acked-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5515): Use a better format to represent usbvision supported boardsMauro Carvalho Chehab
Changed usbvision cards table to allow: 1) Not repeat USB ID on two structs; 2) Not need to specify both usb and card description tables at the same order, removing some magic; Some cards had duplicated names. Fixed. A test for an specific board were doing by using a string comparation. The comparation were wrong. Also, it is not a good practice to recognize a board based on his string name. Acked-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5512): Fix 3/3 for bug 7819: fixed hotplugging for dvbnetMarkus Rechberger
fixed hotplugging for dvbnet Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5511): Fix 2/3 for bug 7819: demux and dvrMarkus Rechberger
fixing hotplug issue for demux[n] and dvr[n] Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5510): Fix 1/3 for bug 7819: fixed frontend hotplug issueMarkus Rechberger
fixed frontend hotplug issue Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5507): Pvrusb2: Gather USB bus address info and report itMike Isely
The V4L2 API requires a unique bus_info string returned as part of the v4l2_capability structure. These changes gather up the USB address information, from the underlying device, into a string and report that out through v4l2 and via sysfs (for completeness). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5505): Fix Kernel Bugzilla #8301: spinlock fix for flexcop-pciHendrik Borghorst
If you modprobe the b2c2-flexcop-pci module you got a hardlock of your system. This is due the usage of spin_lock before spin_lock_init is called. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5504): Sn9c102: Make driver V4L2 not V4L1Trent Piepho
sn9c102 is a v4l2 driver, except it used a couple v4l1 helper functions. Stop using those functions and depend on V4L2 in Kconfig. Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5503): Sn9c102: declare constant byte sequences as static constTrent Piepho
Makes sure they don't get copied onto the stack. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5502): Sn9c102: more efficient register writing codeTrent Piepho
There were many places in the driver which had long sequences of constant register initializations. These were done with one function call per register. The register address and value were immediate values in the function calls. This is very inefficient, as each register and value take twice the space when they are code, as each includes a push instruction to put it on the stack. There there is the overhead, both size and time, for a function call for each register. It's also quite a few lines of C code to do this. The patch creates a function that writes multiple registers from a list, and a macro that makes it easy to construct a such a list as a const static local to send to the function. This gets rid of quite a bit of C code, and shrinks the driver by around 8k, while at the same time being more efficient. Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5497): Additional card support for bttv driverScott Alfter
SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5494): Lgdt330x: Fix some warningsTrent Piepho
It's KERN_WARNING "lgdt....", not "KERN_WARNING lgdt...." Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5492): Remove useless includes of i2c-algo-bit.hJean Delvare
The tda7432, tda9875 and tvaudio media drivers don't need to include the linux/i2c-algo-bit.h header file. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5491): Cx88: Support the DTV1000 T analog inputsJean Delvare
Add support for the S-Video and CVBS (composite) analog video inputs of the Leadtek WinFast DTV1000 T adapter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5490): Drivers/media/video/se401.c: check kmalloc() return value.Amit Choudhary
Check the return value of kmalloc() in function se401_start_stream(), in file drivers/media/video/se401.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5489): Codec.c: check kmalloc() return value.Amit Choudhary
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5488): Replace DMA magic mask for its aliasesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5486): Add support for remote of Asustech P7131 Hybrid LNAEd Vipas
This patch just defines the remote control type. Signed-off-by: Ed Vipas <epvipas@gmail.com> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5485): Tda827x: delayed probing of tuner versionHartmut Hackmann
When the tuner is attached, the tda10046 is not initilized yet, so it is searching for its firmware. If the tuner is attached to the tda10046 silent i2c port, a bus collision can occur. Now the version is probed during the first init or sleep call. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5484): Set tda8290 to analog mode after initHartmut Hackmann
Set tda8290 to analog mode after init, otherwise the tuner driver will not accept i.e. the standby command. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5482): Bttv: automatically load dvb-bt8xx for bttv cards with dvbJarod Wilson
This patch causes the bttv driver to automatically load the dvb-bt8xx module for bttv/dvb hybrid cards. Successfully tested with a pcHDTV HD-2000 card. This patch is based on the recent patches to enable autoloading of cx88-dvb, cx88-blackbird and saa7134-dvb. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5481): Fix audio input for AverTv Go 007Damian Minkov
Fix audio input source for capturing(playing) audio on AverTv Go 007 cards. Signed-off-by: Damian Minkov <damencho@damencho.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5480): Fix cx88_print_irqbits calls to use ARRAY_SIZEMauro Carvalho Chehab
cx88_print_irqbits were expecting a string pointer with 32 bytes. Better to pass the string size and use ARRAY_SIZE on its calls. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5479): Use ARRAY_SIZE instead of a magic numberMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5478): Use ARRAY_SIZE and a cleaner logic for initializing tunerMauro Carvalho Chehab
ATI HDTV Wonder needs to initialize some registers before allowing the tuner to start working. The current logic have lots of magic. This patch makes the code cleaner, using ARRAY_SIZE() for the initialization array and using a bidimensional array, instead of doing some stuff like: &buffer[i+2] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-02 04:00:51 +0000