aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2007-11-04V4L/DVB (6402): s5h1409: Fix broken QAM supportSteven Toth
This patch enables QAM Annex-B support (US digital cable) for the s5h1409 VSB/QAM demodulator. Tested successfully with the mt2131 tuner, present on the following supported boards: Hauppauge WinTV-HVR-1250 Hauppauge WinTV-HVR-1800 Hauppauge WinTV-HVR-1800lp This patch is also known to work with an upcoming XC5000 tuner driver. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6395): cafe_ccic: Add a pointer to the data sheetJonathan Corbet
Add a pointer to the (recently posted) Cafe data sheet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6394): Fix a cafe_ccic resume bugJonathan Corbet
If the system is suspended while the camera is streaming, it will not continue streaming on resume. Save the state properly so that resume works. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6392): bttv: Update initial image size when set via V4L1 VIDIOCMCAPTURETrent Piepho
The V4L1 spec says that the image size should be with with VIDIOCSWIN before requesting buffers with VIDIOCGMBUF and capturing into them with VIDIOCMCAPTURE. But it seems that many apps don't do this. They set the size using the fields in the VIDIOCMCAPTURE ioctl. The driver doesn't know what size to capture until it actually starts to capture. In particular, it doesn't know what size to capture until it has already mmap the captured buffers. Which is quite stupid. Why V4L1 has size and format fields for VIDIOCMCAPTURE I have no idea. Many drivers don't support this, including those using v4l1-compat. The bttv does, which is probably the only reason such broken software is so prevalent. But, the driver doesn't adjust its idea of what size is being captured when it is set this way. If you try to query the driver's current setting with v4l2-ctl, it won't be correct. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6391): bttv: SPICT ioctl doesn't work with vlcTrent Piepho
The bttv driver instists that the depth specified in the call to VIDIOCSPICT match the pixel format specified in the same call. vlc doesn't set the depth field, which makes the SPICT ioctl always fail. The V4L1 standard is not clear on how most operation are supposed to work, and this is no exception. The depth field would appear to be entirely redundant, as the pixel format specifies a specific depth. It could be that this field was only meant for output from the *G*PICT ioctl and should be ignored in *S*PICT. This is in fact what the v4l1-compat wrapper does. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02cleanup asm/scatterlist.h includesAdrian Bunk
Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-31[MEDIA] IVTV: exit_ivtv_i2c() cannot be __devexitDavid Miller
It is referenced both from __devinit code (ivtv_probe) and normal .text (ivtv_process_eeprom), and therefore cannot be discarded via __devexit. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[PATCH] Fix breakage after SG cleanupsRalf Baechle
Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22Merge branch 'master' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (37 commits) V4L/DVB (6382): saa7134: fix NULL dereference at suspend time for cards without IR receiver V4L/DVB (6380): ivtvfb: Removal of the 'osd_compat' module option V4L/DVB (6379): patch which improves GotView Saa7135 remote control V4L/DVB (6378b): Updates info about the removal of V4L1 at feature-removal-schedule.txt V4L/DVB (6378a): Removal of VIDIOC_[G|S]_MPEGCOMP from feature-removal-schedule.txt V4L/DVB (6378): DiB0700-device: Using 1.10 firmware V4L/DVB (6357): pvrusb2: Improve encoder chip health tracking V4L/DVB (6356): "while (!ca->wakeup)" breaks the CAM initialisation V4L/DVB (6352): ir-kbd-i2c: Missing break statement V4L/DVB (6350): V4L: possible leak in em28xx_init_isoc V4L/DVB (6348): ivtv: undo video mute when closing the radio V4L/DVB (6347): ivtv: fix video mute when radio is used V4L/DVB (6346): ivtvfb: YUV output size fix when ivtvfb is not loaded V4L/DVB (6345): ivtvfb: YUV handling of an image which is not visible in the display area V4L/DVB (6343): ivtvfb: check return value of unregister_framebuffer V4L/DVB (6342): ivtv: fix circular locking (bug 9037) V4L/DVB (6341): ivtv: fix resizing MPEG1 streams V4L/DVB (6340): ivtvfb: screen mode change sometimes goes wrong V4L/DVB (6339): ivtv: set the video color to black instead of green when capturing from the radio V4L/DVB (6338): ivtv: fix incorrect EBUSY return ...
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22V4L/DVB (6382): saa7134: fix NULL dereference at suspend time for cards ↵Matthias Schwarzott
without IR receiver Calling saa7134_ir_stop at suspend is no good idea for saa7134 cards without remote control. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6380): ivtvfb: Removal of the 'osd_compat' module optionIan Armstrong
Due to changes in the core ivtv driver as of release 1.0, the osd_compat module option has been rendered obsolete. This patch removes the option and all code associated with it. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6379): patch which improves GotView Saa7135 remote controlPedro
improve GoTView PCI7135 remote control working under linux. Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Eugene M. Roginskii <roginovicci@nm.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6378): DiB0700-device: Using 1.10 firmwarePatrick Boettcher
As for most of the users the 1.10 firmware is an improvement we should use this firmware always now. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6357): pvrusb2: Improve encoder chip health trackingMike Isely
This is a minor change to help with tracking the viability of the encoder chip within the PVR USB2 device. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6356): "while (!ca->wakeup)" breaks the CAM initialisationMarco Schluessler
Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6352): ir-kbd-i2c: Missing break statementTrent Piepho
Someone added a new case without adding a break to the one before it. Thanks to Margus <b-berski at mbox200 dot swipnet dot se> for spotting this. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6350): V4L: possible leak in em28xx_init_isocFlorin Malita
Coverity (CID 1929) spotted the following: if a transfer buffer allocation fails, the last allocated urb is leaked (it hasn't been stored in dev->urb[] yet so em28xx_uninit_isoc misses it). The patch also includes a small typo fix. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6348): ivtv: undo video mute when closing the radioHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6347): ivtv: fix video mute when radio is usedHans Verkuil
When the radio is active the video should be muted when a capture starts. However, this was done at the wrong time and the mute settings were overwritten when cx2341x_update was called. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6346): ivtvfb: YUV output size fix when ivtvfb is not loadedIan Armstrong
If the ivtvfb module isn't loaded, the valid YUV output area should be set to full-screen. This patch fixes the case where the valid output area was not reset when the output broadcast format was changed from NTSC to PAL. This resulted in output being limited to the top 480 lines of the display. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6345): ivtvfb: YUV handling of an image which is not visible in the ↵Ian Armstrong
display area When the ivtvfb module is loaded, the YUV output is relative to the framebuffer output. When a virtual screen size is used, the output area for the YUV may actually be off screen. To prevent the hardware from crashing, the current driver will ignore an off-screen position and leave the output visible at the last on-screen position. This may not be desirable, so this patch will switch off the YUV output should the image move off-screen, and re-enable it should the image move on-screen again. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6343): ivtvfb: check return value of unregister_framebufferHans Verkuil
Prevent unloading the framebuffer if it is still in use. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6342): ivtv: fix circular locking (bug 9037)Hans Verkuil
If you try to access the video device from within an udev rule, then you get into a circular locking situation. Changed the driver to postpone the registration of the devices until everything else has been fully initialized, so that the newly created device can be used immediately. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6341): ivtv: fix resizing MPEG1 streamsHans Verkuil
Resizing an MPEG 1 stream would cut off the right half of the image due to a missing divide by 2 in VIDIOC_S_FMT. Also did some minor cleanup in this part of the code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6340): ivtvfb: screen mode change sometimes goes wrongIan Armstrong
This patch partially reverts a previous change that caused the CX2341X_OSD_SET_PIXEL_FORMAT firmware calls to be skipped when the pixel format of the framebuffer wasn't altered by FBIOPUT_VSCREENINFO. Unfortunately, another firmware call on the PVR350 sometimes scrambles the display when trying to adjust the framebuffer settings. This patch re-enables the CX2341X_OSD_SET_PIXEL_FORMAT calls to try and prevent this from occurring. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6339): ivtv: set the video color to black instead of green when ↵Hans Verkuil
capturing from the radio Thanks-to: Martin Dauskardt <md001@gmx.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6338): ivtv: fix incorrect EBUSY returnHans Verkuil
Trying to open the radio when a capture is in progress will make it impossible to open the radio again since the radio stream wasn't released. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6336): cx8802: Plug memory leak when unregistering a driverTrent Piepho
When a cx8802 sub-driver was unregistered, the struct cx8802_driver, which was kmalloc()ed by cx8802_register_driver(), was deleted from the list of drivers, but never freed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6335): cx8802: Replace list_for_each+list_entry with ↵Trent Piepho
list_for_each_entry Less code and more efficient. Got ride of a variable that counted the number of devices in cx8802_unregister_driver() but was never used. Looked leftover from a cut&paste. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6334): cx88: Change (struct cx8802_dev)->drvlist to a list_head and ↵Trent Piepho
fix bugs It was a struct cx8802_driver for no apparent reason. Nothing uses a cx8802_driver in the cx8802_dev struct. The only field that was used was devlist, a list_head. The code in cx8802_remove() that removed any loaded sub-drivers was broken. It would delete the current list entry, but didn't use list_for_each_safe. It also called list_del() on the list _head_ inside the list_for_each loop? It would crash if it was run, which I don't think can ever happen. Since the cx8802 sub-drivers use the cx8802 driver, they have to be unloaded first. So there isn't any way for a sub-driver to still be loaded when cx8802_remove() is called... Except maybe with PCI hot-plug, if one removes the PCI card while the drivers are loaded? So I left some code in to handle that if it's actually possible. It will remove the sub-drivers from the device cx8802_remove() was called on, and only that device. If one has two DVB cards and unplugs one, there is no reason to unload the DVB drivers for both cards. I have no way to test this, but it can't be worse than what was there before. cx8802_get_driver() is passed a cx8802_dev pointer and looks for the requested driver on that device. It first loops over the cx8802 device list looking for the device it was passed, which is pointless. It doesn't need to find the device pointer in the list, as it already has the pointer. The list_head in the cx8802_driver struct, which joins all the _drivers_ attached to a device, was named devlist. Changed that to drvlist, since the devlist is used for a list of _devices_ in other cx8802 structs. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6333): cx88: Change void* card_priv to struct vp3054_i2c_stateTrent Piepho
card_priv was only used to store a pointer to the vp3054 state struct. There's no need to use a void * since it doesn't have multiple types. Make the field conditional on VP3045 support. It was already conditional on DVB support, but it's only used if VP3045 support is on, so that makes for a better option to check. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6332): cx88: Only include the blackbird fields if blackbird is selectedTrent Piepho
Add some ifdefs around fields only used for blackbird support, similar to the way the dvb fields are only included with dvb support. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6330): V4L: saa7134: Fix interaction between tvaudio thread and the ↵Maxim Levitsky
freezer make tvaudio thread freezeable, and add proper support for that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6329): Additional Fixes for saa7134 suspend/resumeMaxim Levitsky
Fixes few more problems I found in my saa7134 resume code: * Race between IRQ handler and .suspend()/.resume() functions * Removes timeout timers on active buffers - those buffers will be recaptured after resume * Adds suspend/resume for IR code - probably necessary if using polling mode * Adds #ifdef CONFIG_PM overs suspend code * Runs a quirk in set_tvnorm in suspend/resume too * Rearranges the order of calls in saa7134_resume to be exactly as in saa7134_initdev thus the card is initialized in exactly the same way * Since DMA audio capture suspend/resume isn't yet supported, avoid re-enabling it on resume for now Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6328): ivtv: fix NULL dereferenceAdrian Bunk
We shouldn't dereference "itv" when we know it's NULL... Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6326): tuner-core.c: fe_has_signal() can return uninitialized valueMichael Krufky
Initialize strength to zero. Thanks to Adrian Bunk, who spotted this with the Coverity checker. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6325): Double-free in cx23885_initdevFlorin Malita
Both cx23885_initdev and cx23885_dev_setup free the device in their error path so a failure in the latter causes a double-free. Since cx23885_dev_setup is only called from cx23885_initdev, it should be safe to remove its deallocation and leave the cleanup up to the allocating function. Coverity CID 1922. Signed-off-by: Florin Malita <fmalita@gmail.com> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6324): fix videobuf_cgmbuf exportPekka Enberg
As videobuf_cgmbuf is defined only if CONFIG_VIDEO_V4L1_COMPAT is enabled, move the EXPORT_SYMBOL_GPL declaration inside the #ifdef block. Fixes compilation for x86_64 defconfig. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6323): V4L: cinergyT2, remove bad usage of ERESTARTSYSJiri Slaby
cinergyT2, remove bad usage of ERESTARTSYS test of cinergyt2->disconnect_pending doesn't ensure pending signal and so ERESTARTSYS would reach userspace, which is not permitted. Change it to EAGAIN. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6321): Remove obsolete VIDIOC_S/G_MPEGCOMP ioctlsHans Verkuil
Remove the obsolete VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP ioctls from the V4L2 API as per the removal schedule (October 2007). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6320): v4l core: remove the unused .hardware V4L1 fieldMauro Carvalho Chehab
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6319): radio-gemtek: fix 'VID_HARDWARE_GEMTEK' undeclaredPekka Seppänen
Remove obsolete V4L v1 reference. Thanks to Ingo Molnar for pointing this issue. Signed-off-by: Pekka Seppänen <pexu@kapsi.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6187): cx88-alsa: Add TLV supportTrent Piepho
Lets mixer apps display a dB range for the volume control. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6185): cx88-alsa: Add mute controls, change control namesTrent Piepho
Add two mute controls. One mutes everything, the other just mutes the analog pass-through output. Rename the existing volume control. The controls are now: Playback Volume Playback Switch Capture Switch These names might seem odd, but I believe they are more correct. The previous "Capture Volume" control didn't actually effect the volume of the captured audio. Instead it controls the volume of the analog pass-thought output. It appears that pass-through controls like this are usually considered to be in the playback direction, not capture. For example, "CAPTURE feedback Playback Volume" is the name used for a control that appears to have the same effect in the ca0106 driver. We only have one volume control, so we can omit the "CAPTURE feedback" part. If someone where to add PCM playback support to the driver, then this would be the volume control. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-19more UTF-8 conversionsMarcin Garski
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 12:44:18 +0000