aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc/Kconfig
AgeCommit message (Collapse)Author
2008-11-12Add c2 port supportRodolfo Giometti
C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12ics932s401: new clock generator chip driverDarrick J. Wong
The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06ACPI: remove CONFIG_ACPI_ECBjorn Helgaas
Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23Merge branch 'linus' into testLen Brown
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'panasonic' into testLen Brown
2008-10-22panasonic-laptop: depends on ACPIRandy Dunlap
panasonic-laptop uses many acpi_*() functions so it should depend on ACPI; otherwise there are approximately 70 warnings/errors generated. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-16AT91: atmel_pwm only available for certain AT91 processorsAndrew Victor
Only three of Atmel's AT91 processors (SAM9263, SAM9RL and CAP9) include a PWM controller. It should therefore only be possible to enable the misc/atmel_pwm.c driver on those processors (and not all AT91 processors). Signed-off-by: Andrew Victor <linux@maxim.org.za> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16eeepc: depends on RFKILLRandy Dunlap
EEEPC_LAPTOP uses RFKILL, so the former should depend on RFKILL. Build errors happen when EEEPC_LAPTOP=y and RFKILL=m. eeepc-laptop.c:(.text+0xd5a7b): undefined reference to `rfkill_allocate' eeepc-laptop.c:(.text+0xd5b04): undefined reference to `rfkill_register' eeepc-laptop.c:(.text+0xd5b48): undefined reference to `rfkill_allocate' eeepc-laptop.c:(.text+0xd5bd4): undefined reference to `rfkill_register' eeepc-laptop.c:(.text+0xd5ece): undefined reference to `rfkill_unregister' eeepc-laptop.c:(.text+0xd5ef6): undefined reference to `rfkill_unregister' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Karol Kozimor <sziwan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-08acer-wmi: Add rfkill support for wireless and bluetoothCarlos Corbacho
This patch implements rfkill support for the wireless and bluetooth devices commonly found on Acer laptops. For now, we will always poll these devices once a second to guarantee we can catch state changes. On newer Acer laptops, it may be possible to rely on WMI events to do this instead, and experimental support for this will be added in a later patch. 3G has been deliberately left off for now, as we still have no way to detect it, (nor, AFAIK, has any Linux user tried the code) and on laptops that don't support 3G, trying to poll for the status will leave the logs full of ACPI tracebacks. The old sysfs interface for wireless and bluetooth will be removed in a later patch. (Thanks to Henrique de Moraes Holschuh and Dmitry Torokhov for reviewing this patch). Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-24panasonic-laptop: add Panasonic Let's Note laptop extras driver v0.94Harald Welte
This is a driver for ACPI extras such as hotkeys and backlight brightness control on various Panasonic "Let's Note" series laptop computers. It exports the backlight via the backlight class device API, and the hotkeys as input event device. Some more esoteric items like number of installed batteries are exported via sysfs device attributes. Hotkey events also generate old-style ACPI enents through /proc/acpi/event to interoperate with current versions of acpid. Signed-off-by: Harald Welte <laforge@gnumonks.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-08-04[IA64] Fix uniprocessor build w.r.t. SGI_XP and SGI_GRUTony Luck
The SGI XP and GRU drivers only work on SMP systems ... the Kconfig file only disallowed them for non-SMP X86. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-01add reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRUDean Nelson
Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01add dependency of CONFIG_SGI_XP upon CONFIG_NETDean Nelson
Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30sgi-xp: enable building of XPC/XPNET on x86_64Dean Nelson
Get XPC/XPNET to build on x86_64. Trying to modprobe them up on a non-UV or sn2 system will result in a -ENODEV. Signed-off-by: Dean Nelson <dcn@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30GRU Driver: driver/misc Makefile & Kconfig changesJack Steiner
Driver/misc changes for the GRU driver Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25kconfig: fix typos: "Suport" -> "Support"Heikki Orsila
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25drivers/misc/phantom: note PCIJiri Slaby
Tell users that the driver is only for PCI devices to stop asking for support of firewire and parallel devices. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25drivers/misc/hpilo.c needs CONFIG_PCIAndrew Morton
m68k allmodconfig: drivers/misc/hpilo.c: In function 'ilo_ccb_close': drivers/misc/hpilo.c:225: error: implicit declaration of function 'pci_free_consistent' drivers/misc/hpilo.c: In function 'ilo_ccb_open': drivers/misc/hpilo.c:244: error: implicit declaration of function 'pci_alloc_consistent' drivers/misc/hpilo.c:245: warning: assignment makes pointer from integer without a cast Cc: David Altobelli <david.altobelli@hp.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25misc: add HP WMI laptop extras driverMatthew Garrett
This driver adds support for reading and configuring certain information on modern HP laptops with WMI BIOS interfaces. It supports enabling and disabling the ambient light sensor, querying attached displays and hard drive temperature, sending events on docking and querying the state of the dock and toggling the state of the wifi, bluetooth and wwan hardware via rfkill. It also makes the little "(i)" button work on machines that send that via WMI rather than via the keyboard controller. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24Merge branch 'release-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6 * 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6: acpi: fix crash in core ACPI code, triggered by CONFIG_ACPI_PCI_SLOT=y ACPI: thinkpad-acpi: don't misdetect in get_thinkpad_model_data() on -ENOMEM ACPI: thinkpad-acpi: bump up version to 0.21 ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill support ACPI: thinkpad-acpi: WLSW overrides other rfkill switches ACPI: thinkpad-acpi: prepare for bluetooth and wwan rfkill support ACPI: thinkpad-acpi: consolidate wlsw notification function ACPI: thinkpad-acpi: minor refactor on radio switch init Revert "ACPI: don't walk tables if ACPI was disabled" Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled." Revert "Fix FADT parsing" ACPI : Set FAN device to correct state in boot phase ACPI: Ignore _BQC object when registering backlight device ACPI: stop complaints about interrupt link End Tags and blank IRQ descriptors
2008-07-21HP iLO driverDavid Altobelli
A driver for the HP iLO/iLO2 management processor, which allows userspace programs to query the management processor. Programs can open a channel to the device (/dev/hpilo/dXccbN), and use this to send/receive queries. The O_EXCL open flag is used to indicate that a particular channel cannot be shared between processes. This driver will replace various packages HP has shipped, including hprsm and hp-ilo. Signed-off-by: David Altobelli <david.altobelli@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill supportHenrique de Moraes Holschuh
Add a read/write rfkill interface to the bluetooth radio switch on the bluetooth submodule, and one for the wireless wan radio switch to the wan submodule. Since rfkill does care for when a switch changes state, use WLSW notifications to also check if the WWAN or Bluetooth switches did not change state (due to them being slaves of WLSW in firmware/hardware, but that reality not being always properly exported by the thinkpad firmware). Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: John W. Linville <linville@tuxdriver.com>
2008-07-16fujitsu-laptop: depends on INPUTRandy Dunlap
fujitsu-laptop uses input_* functions, so it should depend on INPUT. drivers/built-in.o: In function `acpi_fujitsu_add': fujitsu-laptop.c:(.text+0xaaec7): undefined reference to `input_allocate_device' fujitsu-laptop.c:(.text+0xaaf39): undefined reference to `input_register_device' fujitsu-laptop.c:(.text+0xab025): undefined reference to `input_free_device' drivers/built-in.o: In function `acpi_fujitsu_notify': fujitsu-laptop.c:(.text+0xab0d8): undefined reference to `input_event' fujitsu-laptop.c:(.text+0xab0e5): undefined reference to `input_event' fujitsu-laptop.c:(.text+0xab0f5): undefined reference to `input_event' fujitsu-laptop.c:(.text+0xab102): undefined reference to `input_event' drivers/built-in.o: In function `acpi_fujitsu_hotkey_notify': fujitsu-laptop.c:(.text+0xab261): undefined reference to `input_event' drivers/built-in.o:fujitsu-laptop.c:(.text+0xab26e): more undefined references to `input_event' follow drivers/built-in.o: In function `acpi_fujitsu_hotkey_add': fujitsu-laptop.c:(.text+0xab49c): undefined reference to `input_allocate_device' fujitsu-laptop.c:(.text+0xab51a): undefined reference to `input_register_device' fujitsu-laptop.c:(.text+0xab5e4): undefined reference to `input_free_device' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16Fujitsu-laptop updateJonathan Woithe
Add additional capabilities to the Fujitsu-laptop driver. * Brightness hotkey actions are sent to userspace. This can be disabled using a module parameter if it causes issues with models which handle these keys transparently in the BIOS. * Actions of additional hotkeys found on some Fujitsu models (eg: the suspend key and the dedicated "power on passphrase" keys) are broadcast to userspace. * An alternative brightness control method used by some Fujitsu models (for example, the S6410) is now supported, enabling software brightness controls on models using this method. * DMI-based module aliases are configured for the S6410 and S7020. * The current LCD brightness after booting should now be reflected in the standard backlight interface sysfs file (previously it was always set to 0). The platform brightness sysfs interface has always been fine. Thanks go to Peter Gruber who provided a significant portion of this code and tested various iterations of the patch on his S6410. Signed-off-by: Peter Gruber <nokos@gmx.net> Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16misc,acpi,backlight: compal Laptop ExtrasCezary Jackiewicz
This is driver for Compal Laptop: FL90/IFL90, based on MSI driver. This driver exports a few files in /sys/devices/platform/compal-laptop/: lcd_level - screen brightness: contains a single integer in the range 0..7 (rw) wlan - wlan subsystem state: contains 0 or 1 (rw) bluetooth - bluetooth subsystem state: contains 0 or 1 (rw) raw - raw value taken from embedded controller register (ro) In addition to these platform device attributes the driver registers itself in the Linux backlight control subsystem and is available to userspace under /sys/class/backlight/compal-laptop/. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Len Brown <lenb@kernel.org> Cc: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-30Merge branches 'release', 'acpica', 'bugzilla-10224', 'bugzilla-9772', ↵Len Brown
'bugzilla-9916', 'ec', 'eeepc', 'idle', 'misc', 'pm-legacy', 'sysfs-links-2.6.26', 'thermal', 'thinkpad' and 'video' into release
2008-04-29ACER_WMI/ASUS_LAPTOP: fix build bugIngo Molnar
randconfig testing in x86.git found the following upstream build bug: drivers/built-in.o: In function `acer_led_exit': acer-wmi.c:(.text+0xdc76e): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `acer_platform_probe': acer-wmi.c:(.devinit.text+0x63e6): undefined reference to `led_classdev_register' which was due to acer-wmi.o only depending on CONFIG_LEDS_CLASS, while also using a symbol offered by CONFIG_NEW_LEDS. Also fix a similar bug in CONFIG_ASUS_LAPTOP. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29eeepc-laptop: add hwmon fan controlCorentin Chary
Adds an hwmon interface to control the fan. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29eeepc-laptop: add backlightCorentin Chary
Add backlight class support to the eeepc-laptop driver. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29eeepc-laptop: add base driverEric Cooper
This patch is based on Eric Cooper's work to clean the original asus_acpi given by Asus. It's a platform driver (/sys/devices/platform/eeepc/) wich support: - hotkeys - wlan on/off - camera on/off - cardr on/off Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29ACPI: thinkpad-acpi: fix selects in KconfigHenrique de Moraes Holschuh
Add missing select for BACKLIGHT_LCD_SUPPORT, as select doesn't select the dependencies of a symbol for us. Also, "select INPUT" in Kconfig. We are not an Input device, nor are we anywhere close to the input subsystem in the Kconfig tree, so using "depends on INPUT" is not user-friendly at all. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29ACPI: thinkpad-acpi: prepare light and LED for sysfs supportHenrique de Moraes Holschuh
Do some preparatory work to add sysfs support to the thinklight and thinkpad leds driver. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29thermal: add the support for building the generic thermal as a moduleZhang Rui
Build the generic thermal driver as module "thermal_sys". Make ACPI thermal, video, processor and fan SELECT the generic thermal driver, as these drivers rely on it to build the sysfs I/F. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-22[IA64] move XP and XPC to drivers/misc/sgi-xpDean Nelson
Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-19Merge branch 'master' of ↵Haavard Skinnemoen
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/tclib into base
2008-03-13acer-wmi: build depends on i8042Jiri Kosina
Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-04atmel_tc clocksource/clockevent codeDavid Brownell
Clocksource and clockevent device based on the Atmel TC blocks. The clockevent device handles both periodic and oneshot modes, so this enables NO_HZ and high res timers on some platforms that previously couldn't use those mechanisms. This works on both AVR32 and AT91 chips, given relevant patches for tclib support (always) and clockevents (or else this will only look like a higher precision clocksource). It's an updated and modularized version of an AT91-only patch that has circulated for some time now. Changes relative to the original patch: * Update to use new tclib API * Replace open-coded do-while loop using goto with a real do-while loop * Minor irq handler optimization: Load register base address from dev_id instead of a global variable. * Aggressively turn off clocks when the clockevent isn't being used * Include the clockevent code on AT91RM9200 as well. The rating is lower than the System Timer, so the clock will usually stay off. * Don't assume that the number of clocks is always equal to the number of irqs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-03-04atmel_tc libraryDavid Brownell
Create <linux/atmel_tc.h> based on <asm-arm/arch-at91/at91-tc.h> and the at91sam9263 and at32ap7000 datasheets. Most AT91 and AT32 SOCs have one or two of these TC blocks, which include three 16-bit timers that can be interconnected in various ways. These TC blocks can be used for external interfacing (such as PWM and measurement), or used as somewhat quirky sixteen-bit timers. Changes relative to the original version: * Drop unneeded inclusion of <linux/mutex.h> * Support an arbitrary number of TC blocks * Return a struct with information about a TC block from atmel_tc_alloc() instead of using a combination of return values and "out" parameters. * ioremap() the I/O registers on allocation * Look up clocks and irqs for all channels * Add "name" parameter to atmel_tc_alloc() and use this when requesting the iomem resource. * Check if the platform provided the necessary resources at probe() time instead of when the TCB is allocated. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-16ACPI: thinkpad-acpi: make the video output feature optionalHenrique de Moraes Holschuh
The video output port control feature is not very useful on many ThinkPads (especially when a X server is running), and lately userspace is getting better and better at it, so it makes sense to allow users to stripe out the thinkpad-acpi video feature from their kernels and save at least 2KB. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09Merge branches 'release', 'wmi' and 'laptop-docs' into releaseLen Brown
2008-02-09acer-wmi - Add documentationCarlos Corbacho
Add some initial documentation detailing what acer-wmi is, and how to use it. Update the Kconfig entry with a reference to the documentation. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09sony-laptop - Move sony-laptop.txt to Documentation/laptopsCarlos Corbacho
Also update references to sony-laptop.txt in Kconfig. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> CC: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptopsCarlos Corbacho
Also update references to thinkpad-acpi.txt in Kconfig. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> CC: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09tc1100-wmi: Mark as experimentalCarlos Corbacho
tc1100-wmi has not undergone as much testing as acer-wmi, so it certainly should be marked as experimental as well until we get more user feedback. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-08Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acer-wmi, tc1100-wmi: select ACPI_WMI ACPI: WMI: Improve Kconfig description ACPI: DMI: add Panasonic CF-52 and Thinpad X61 ACPI: thermal: syntax, spelling, kernel-doc intel_menlo: build on X86 only ACPI: build WMI on X86 only ACPI: cpufreq: Print _PPC changes via cpufreq debug layer ACPI: add newline to printk
2008-02-08Basic PWM driver for AVR32 and AT91David Brownell
PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08Merge branches 'release', 'dmi' and 'misc' into releaseLen Brown
2008-02-08acer-wmi, tc1100-wmi: select ACPI_WMILen Brown
It is safe for these Kconfig entries to use select because they select ACPI_WMI, which already has its dependencies satisfied. This makes Kconfig more user friendly, since the user selects the driver they want and the dependency is met for them. Otherwise, the user would have to find and enable ACPI_WMI to make enabling these drivers possible. Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07[SCSI] enclosure: add support for enclosure servicesJames Bottomley
The enclosure misc device is really just a library providing sysfs support for physical enclosure devices and their components. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07intel_menlo: build on X86 onlyLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>