aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-09drivers/firmware: const-ify DMI API and internalsJeff Garzik
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-03[POWERPC] Sky Cpu and Nexus: use seq_file/single_open on proc interfaceCyrill Gorcunov
This patch changes proc interface to be used with single_file/seq_open calls. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu: use C99 style for struct initCyrill Gorcunov
This changes structure item init format to C99, and removes useless structure items init. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: check for create_proc_entry ret codeCyrill Gorcunov
Adds checking of create_proc_entry call to prevent possible NULL pointer usage. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: check for platform_get_resource retcodeCyrill Gorcunov
Add adds checking for platform_get_resource() return code to prevent possible NULL pointer usage. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: include io.hCyrill Gorcunov
Add #include <asm/io.h> directive to properly declare ioremap() and writel(). Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: code style improvementCyrill Gorcunov
Remove useless spaces and adds some empty lines to make code more readable. Also marker for printk is added. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17Pull thinkpad into release branchLen Brown
2007-09-17ACPI: thinkpad-acpi: bump up version to 0.16Henrique de Moraes Holschuh
Name it thinkpad-acpi version 0.16 to avoid any confusion with some 0.15 thinkpad-acpi development snapshots and backports that had input layer support, but no hotkey_report_mode support. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-17ACPI: thinkpad-acpi: revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED optionHenrique de Moraes Holschuh
Revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED Kconfig option because it would create a legacy we don't want to support. CONFIG_THINKPAD_ACPI_INPUT_ENABLED was added to try to fix an issue that is now moot with the addition of the netlink ACPI event report interface to the ACPI core. Now that ACPI core can send events over netlink, we can use a different strategy to keep backwards compatibility with older userspace, without the need for the CONFIG_THINKPAD_ACPI_INPUT_ENABLED games. And it arrived before CONFIG_THINKPAD_ACPI_INPUT_ENABLED made it to a stable mainline kernel, even, which is Good. This patch is in sync with some changes to thinkpad-acpi backports, that will keep things sane for userspace across different combinations of kernel versions, thinkpad-acpi backports (or the lack thereof), and userspace capabilities: Unless a module parameter is used, thinkpad-acpi will now behave in such a way that it will work well (by default) with userspace that still uses only the old ACPI procfs event interface and doesn't care for thinkpad-acpi input devices. It will also always work well with userspace that has been updated to use both the thinkpad-acpi input devices, and ACPI core netlink event interface, regardless of any module parameter. The module parameter was added to allow thinkpad-acpi to work with userspace that has been partially updated to use thinkpad-acpi input devices, but not the new ACPI core netlink event interface. To use this mode of hot key reporting, one has to specify the hotkey_report_mode=2 module parameter. The thinkpad-acpi driver exports the value of hotkey_report_mode through sysfs, as well. thinkpad-acpi backports to older kernels, that do not support the new ACPI core netlink interface, have code to allow userspace to switch hotkey_report_mode at runtime through sysfs. This capability will not be provided in mainline thinkpad-acpi as it is not needed there. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Hugh Dickins <hugh@veritas.com> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-29msi-laptop: replace ',' with ';'Jonathan Woithe
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25Pull events into release branchLen Brown
Conflicts: drivers/acpi/video.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24Pull sony into release branchLen Brown
2007-08-24asus-laptop: Fix rmmod of asus_laptopGuillaume Chazarain
The asus laptop driver conditionnaly registers leds in asus_led_register() depending on their availability, but unconditionnaly unregisters them all at exit time or when the module fails to load. Unregistering not registered leds result in the following Oops. So we should check before unregistering. [<c032d2f9>] do_page_fault+0x511/0x5e9 [<c032bae2>] error_code+0x6a/0x70 [<c026abf8>] device_unregister+0x26/0x32 [<f8864218>] led_classdev_unregister+0x58/0x94 [led_class] [<f88a90f8>] asus_led_exit+0x17/0x41 [asus_laptop] [<f88a91c9>] asus_laptop_exit+0xd/0x3f [asus_laptop] [<c013cee1>] sys_delete_module+0x17b/0x1a2 [<c0106eae>] sysenter_past_esp+0x6b/0xa1 EIP: [<c026a9a3>] device_del+0xb/0x23a SS:ESP 0068:f594ef0c Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24sony-laptop: call sonypi_compat_init earlierMattia Dongili
sonypi_compat uses a kfifo that needs to be present before _SRS is called to be able to cope with the IRQs triggered when setting resources. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24sony-laptop: enable Vaio FZ eventsMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23ACPI: Schedule /proc/acpi/event for removalLen Brown
Schedule /proc/acpi/event for removal in 6 months. Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event() to make sure there is no confusion that it is for /proc/acpi/event only. Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event. There is no functional change if CONFIG_ACPI_PROC_EVENT=y Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23ACPI: don't duplicate input events on netlinkZhang Rui
The previous events patch added a netlink event for every user of the legacy /proc/acpi/event interface. However, some users of /proc/acpi/event are really input events, and they already report their events via the input layer. Introduce a new interface, acpi_bus_generate_netlink_event(), which is explicitly called by devices that want to repoprt events via netlink. This allows the input-like events to opt-out of generating netlink events. In summary: events that are sent via netlink: ac/battery/sbs thermal processor thinkpad_acpi dock/bay events that are sent via input layer: button video hotkey thinkpad_acpi hotkey asus_acpi/asus-laptop hotkey sonypi/sonylaptop Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-18Add some help texts to recently-introduced kconfig itemsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12pull asus sony thinkpad into release branchLen Brown
2007-08-07ACPI: thinkpad-acpi: change thinkpad-acpi input default and kconfig helpHenrique de Moraes Holschuh
The current kconfig help text was misleading users. Also, the default for an input-layer-optimized support caused way too many problems without up-to-date userspace in place. So, rework the help text, and change the default to N. Note that distributions are supposed to enable this option as soon as they update HAL to a version that handles the thinkpad-acpi new input layer interface. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03ACPI: thinkpad-acpi: fix the module init failure pathHenrique de Moraes Holschuh
Thomas Renninger reports that if one tries to load thinkpad-acpi in a non-thinkpad, one gets: Call Trace: [<ffffffff802fa57d>] kref_get+0x2f/0x36 [<ffffffff802f97f7>] kobject_get+0x12/0x17 [<ffffffff8036dfd7>] get_driver+0x14/0x1a [<ffffffff8036dfee>] driver_remove_file+0x11/0x32 [<ffffffff8823b9be>] :thinkpad_acpi:thinkpad_acpi_module_exit+0xa8/0xfc [<ffffffff8824b8a0>] :thinkpad_acpi:thinkpad_acpi_module_init+0x74a/0x776 [<ffffffff8024f968>] __link_module+0x0/0x25 [<ffffffff80252269>] sys_init_module+0x162c/0x178f [<ffffffff8020bc2e>] system_call+0x7e/0x83 So, track if the platform driver and its driver attributes were registered, and only deallocate them in that case. This patch is based on Thomas Renninger's patch for the issue. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03sony-laptop: sony_nc_ids[] can become static.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03sony-laptop: restore the last user requested brightness level on resume.Mattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-25Pull auto-load-modules into release branchLen Brown
2007-07-23ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI ↵Thomas Renninger
drivers modpost is going to use these to create e.g. acpi:ACPI0001 in modules.alias. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23ACPI: asus-laptop: Fix failure exitsAl Viro
> Subject : drivers/misc/asus-laptop.c:*: error: 'struct led_classdev' has no member named 'class_dev' > References : http://lkml.org/lkml/2007/7/22/299 > Submitter : Gabriel C <nix.or.die@googlemail.com> Fallout from f8a7c6fe14f556ca8eeddce258cb21392d0c3a2f. However, looking at it shows that checks done in ASUS_LED_UNREGISTER() can't trigger at all (we never get to asus_led_exit() if registration fails) and if that registration fails, we actually leak stuff. IOW, it's worse than just replacing class_dev with dev in there - the tests themselves had been papering over the lousy cleanup logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22Pull thinkpad into release branchLen Brown
2007-07-22sony-laptop: Fix event reading in sony-laptopMattia Dongili
The rewritten event reading code from sonypi was absolutely wrong, this patche makes things functional for type2 and type1 models. Cc: Andrei Paskevich <andrei@capet.iut-fbleau.fr> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22sony-laptop: Add Vaio FE to the special init sequenceMattia Dongili
The Vaio FE series uses the same sequence as Vaio C series Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22sony-laptop: Make the driver use MSC_SCAN and a setkeycode and getkeycode ↵Mattia Dongili
key table. The following is the only way I could think of to hide some events as per Dmitry suggestions while still using the default {set,get}keycode implementation. Make the driver use MSC_SCAN and a setkeycode and getkeycode key table. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Richard Hughes <richard@hughsie.com> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22sony-laptop: Invoke _INI for SNC devices that provide itMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22sony-laptop: Add support for recent Vaios Fn keys (C series for now)Mattia Dongili
Recent Vaios (C, AR, N, FE) need some special initialization sequence to enable Fn keys interrupts through the Embedded Controller. Moreover Fn keys have to be decoded internally using ACPI methods to get the key code. Thus a new DMI table to add SNC init time callbacks and new mappings for model-specific key code to generic sony-laptop code have been added. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22sony-laptop: map wireless switch events to KEY_WLANMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22sony-laptop: add new SNC handlersMattia Dongili
- lid state: GLID - indicator lamp: GILS/SILS - multimedia bass gain: GMGB/CMGB Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: add locking to brightness subdriverHenrique de Moraes Holschuh
The backlight class does all the locking needed for sysfs access, but offers no API to interface to that locking without an layer violation. Since we need to mutex-lock procfs access, implement in-driver locking for brightness. It will go away the day thinkpad-acpi procfs goes away, or the backlight class gives us a way to use its locks without a layer violation. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: bump up version to 0.15Henrique de Moraes Holschuh
Name it thinkpad-acpi version 0.15. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: make EC-based thermal readings non-experimentalHenrique de Moraes Holschuh
Reading the 16 thermal sensors directly from the EC has been stable for about one year, in all supported ThinkPad models. Remove its "experimental" label. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: make sure DSDT TMPx readings don't return +128Henrique de Moraes Holschuh
We get +128 instead of -128 from the DSDT TMPx methods, due to errors when converting a EC byte return that is a s8 to an ACPI handler return that is an int. Fix it once and for all, by clamping acceptable temperature readings from DSDT TMPx so that anything outside the [-127,+127] range is converted to TP_EC_THERMAL_TMP_NA (-128). Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael Olbrich <michael.olbrich@gmx.net> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: react to Lenovo ThinkPad differences in hot keyHenrique de Moraes Holschuh
Lenovo ThinkPads have a slightly different key map layout from IBM ThinkPads (fn+f2 and fn+f3 are swapped). Knowing which one we are dealing with, we can properly set a few more hot keys up by default. Also, export the correct vendor in the input device, as that information might be useful to userspace. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: allow use of CMOS NVRAM for brightness controlHenrique de Moraes Holschuh
It appears that Lenovo decided to break the EC brightness control interface in a weird way in their latest BIOSes. Fortunately, the old CMOS NVRAM interface works just fine in such BIOSes. Add a module parameter that allows the user to select which strategy to use for brightness control: EC, NVRAM, or both. By default, do both (which is the way thinkpad-acpi used to work until now) on IBM ThinkPads, and use NVRAM only on Lenovo ThinkPads. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: store ThinkPad model informationHenrique de Moraes Holschuh
Keep note of ThinkPad model, BIOS and EC firmware information, and log it on startup. Makes for far more readable code in places, too. This patch also adds Lenovo's PCI ID to the pci ids table. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad_acpi: use bool for boolean parametersHenrique de Moraes Holschuh
Some of the module parameters are boolean in nature. Make it so in fact. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: rename pci HID constantHenrique de Moraes Holschuh
Rename an internal driver constant, on request by Len Brown. Also, document exactly what it is for. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: checkpoint sysfs interface version due to input layerHenrique de Moraes Holschuh
The change in the way hotkey events are handled by default, and the use of the input layer for the hotkey events are important enough features to warrant increasing the major field of the sysfs interface version. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: export EV_SW SW_RADIO eventsHenrique de Moraes Holschuh
The expected user case for the radio slider switch on a ThinkPad includes interfacing to applications, so that the user gets an offer to find and associate with a wireless network when the switch is changed from disabled to enabled (ThinkVantage suite). Export the information about the switch state, and switch change events as an EV_SW SW_RADIO event over the input layer. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ivo van Doorn <ivdoorn@gmail.com> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: add power-management handler capabilityHenrique de Moraes Holschuh
Some subdrivers could benefit from resume handling, so add the infrastructure for simple resume handling. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: make the input event mode the defaultHenrique de Moraes Holschuh
Make the input layer the default way to deal with thinkpad-acpi hot keys, but add a kernel config option to retain the old way of doing things. This means we map a lot more keys to useful stuff by default, and also that we enable hot key handling by default on driver load (like Windows does). The documentation for proper use of this resource is also updated. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21ACPI: thinkpad-acpi: add input device support to hotkey subdriverHenrique de Moraes Holschuh
Add input device support to the hotkey subdriver. Hot keys that have a valid keycode mapping are reported through the input layer if the input device is open. Otherwise, they will be reported as ACPI events, as they were before. Scan codes are reported (using EV_MSC MSC_SCAN events) along with EV_KEY KEY_UNKNOWN events. For backwards compatibility purposes, hot keys that used to be reported through ACPI events are not mapped to anything meaningful by default. Userspace is supposed to remap them if it wants to use the input device for hot key reporting. This patch is based on a patch by Richard Hughes <hughsient@gmail.com>. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Richard Hughes <hughsient@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>