aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci.h
AgeCommit message (Collapse)Author
2009-12-17sdhci: protect header file against multi inclusionAlbert Herranz
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23sdhci: support for ADMA only hostsRichard Röjfors
Add support for ADMA on SDHCI hosts, not supporting SDMA. According to the SDHCI specifications a host can support ADMA but not SDMA Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23sdhci-of: fix high-speed cards recognitionAnton Vorontsov
eSDHC fails to recognize some SDHS cards, throwing timeout errors: mmc0: error -110 whilst initialising SD card That's because we calculate timeout value in a wrong way: on eSDHC hosts the timeout clock is derivied from the SD clock, which is set dynamically. As David Vrabel suggested, deriving timeout clock from SD clock is a common scheme, so let's implement DATA_TIMEOUT_USES_SDCLK quirk and use it for eSDHC hosts. Also, from now on we don't need esdhc_get_timeout_clock() callback, so remove it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: David Vrabel <david.vrabel@csr.com> Cc: Ben Dooks <ben@fluff.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29sdhci: get rid of "frequency too high" flood when using eSDHCAnton Vorontsov
Since commit 8dfd0374be84793360db7fff2e635d2cd3bbcb21 ("MMC core: limit minimum initialization frequency to 400kHz") MMC core checks for minimum frequency, and that causes following messages flood when using eSDHC controllers: ... mmc0: Minimum clock frequency too high for identification mode mmc0: Minimum clock frequency too high for identification mode ... The warnings are legitimate, since if we'd use 133 MHz clocks for standard SDHCI controllers, we'd not able to scale frequency down to 400 kHz. But eSDHC controllers have a non-standard SD clock management, so we can divide clock by 256 * 16, not just 256. This patch introduces get_min_clock() callback for sdhci core and implements it for sdhci-of driver, and thus fixes the issue. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21sdhci: Specific quirk vor VIA SDHCI controller in VX855ESHarald Welte
The SDHCI controller found in the VX855ES requires 10ms delay between applying power and applying clock. This issue has been discovered and documented by the OLPC XO1.5 team. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci: Add support for hosts that are only capable of 1-bit transfersAnton Vorontsov
Some hosts (hardware configurations, or particular SD/MMC slots) may not support 4-bit bus. For example, on MPC8569E-MDS boards we can switch between serial (1-bit only) and nibble (4-bit) modes, thought we have to disable more peripherals to work in 4-bit mode. Along with some small core changes, this patch modifies sdhci-of driver, so that now it looks for "sdhci,1-bit-only" property in the device-tree, and if specified we enable a proper quirk. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirkBen Dooks
Add quirk to show the controller cannot do multi-block IO. This is mainly for the Samsung SDHCI controller that currently cannot manage to do multi-block PIO without timing out. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-13sdhci: avoid changing voltage needlesslyPierre Ossman
Because of granularity issues, sometimes we told the hardware to change to the voltage we were already at. Rework the logic so this doesn't happen. Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03sdhci: catch ADMA errorsPierre Ossman
We forgot to add the ADMA error bit to the list of data interrupts. Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-03-24sdhci: Add quirk for forcing maximum block size to 2048 bytesAnton Vorontsov
FSL eSDHC controllers can support maximum block size up to 4096 bytes, the MBL (Maximum Block Length) field in the capabilities register extended by one bit, and is set to 0x3. But the SDHCI core doesn't support blocks of 4096 bytes, and thus forces blksz to the lowest value -- 512 bytes. With this patch we can pin up the blksz to the maximum supported block size, i.e. 2048 bytes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for controllers that need IRQ re-init after resetAnton Vorontsov
FSL eSDHC controllers losing signal/interrupt enable states after reset, so we should re-enable them. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for controllers that need small delays for PIOAnton Vorontsov
Small udelay is needed to make eSDHC work in PIO mode. Without the delay reading causes endless interrupt storm, and writing corrupts data. The first guess would be that we must wait for some bit in some register, but I didn't find any reliable bits that change before and after the delay. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add set_clock callback and a quirk for nonstandard clocksAnton Vorontsov
FSL eSDHC hosts have incompatible register map to manage the SDCLK. This patch adds set_clock callback so that drivers could overwrite set_clock behaviour. Similar patch[1] was posted by Ben Dooks, though in Ben's version the callback is named change_clock, plus the patch has some unrelated bits that makes the patch difficult to reuse. [1] http://lkml.org/lkml/2008/12/2/160 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add get_{max,timeout}_clock callbacksBen Dooks
Some controllers do not provide clock information in their capabilities (in the Samsung case, it is because there are multiple clock sources available to the controller). Add hooks to allow the system to supply clock information. p.s. In the original Ben's patch there was a bug that makes sdhci_add_host() return -ENODEV even if callbacks were specified. This is fixed now. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for hosts reporting inverted write-protect stateAnton Vorontsov
This patch adds SDHCI_QUIRK_INVERTED_WRITE_PROTECT quirk. When specified, the sdhci driver will invert WP state. p.s. Actually, the quirk is more board-specific than controller-specific. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for card-detection pollingAnton Vorontsov
This patch adds SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk. When specified, sdhci driver will set MMC_CAP_NEEDS_POLL MMC host capability, and won't enable card insert/remove interrupts. This is needed for hosts with unreliable card detection, such as FSL eSDHC. The original eSDHC driver was tring to "debounce" card-detection IRQs by reading present state and disabling particular interrupts. But with this debouncing scheme I noticed that sometimes we miss card insertion/removal events. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Split card-detection IRQs management from sdhci_init()Anton Vorontsov
Card detection interrupts should be handled separately as they should not be enabled before mmc_add_host() returns and should be disabled before calling mmc_remove_host(). The same is for suspend and resume routines. sdhci_init() no longer enables card-detection irqs. Instead, two new functions implemented: sdhci_enable_card_detection() and sdhci_disable_card_detection(). New sdhci_reinit() call implemented to behave the same way as the old sdhci_init(). Also, this patch implements and uses few new helpers to manage IRQs in a more conveinient way, that is: - sdhci_clear_set_irqs() - sdhci_unmask_irqs() - sdhci_mask_irqs() - SDHCI_INT_ALL_MASK constant sdhci_enable_sdio_irq() converted to these new helpers, plus the helpers will be used by the subsequent patches. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for bus-specific IO memory accessorsAnton Vorontsov
Currently the SDHCI driver works with PCI accessors (write{l,b,w} and read{l,b,w}). With this patch drivers may change memory accessors, so that we can support hosts with "weird" IO memory access requirments. For example, in "FSL eSDHC" SDHCI hardware all registers are 32 bit width, with big-endian addressing. That is, readb(0x2f) should turn into readb(0x2c), and readw(0x2c) should be translated to le16_to_cpu(readw(0x2e)). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-02sdhci: Add quirk for controllers with no end-of-busy IRQBen Dooks
The Samsung SDHCI (and FSL eSDHC) controller block seems to fail to generate an INT_DATA_END after the transfer has completed and the bus busy state finished. Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the new busy method are the cause of the behaviour change. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18sdhci: fix led namingHelmut Schaa
Fix the led device naming for the sdhci driver. The led class documentation defines the led name to have the form "devicename:colour:function" while not applicable sections should be left blank. To comply with the documentation the led device name is changed from "mmc*" to "mmc*::". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18Revert "sdhci: force high speed capability on some controllers"Pierre Ossman
This reverts commit a4b76193774b463b922cab2f92450efb20d29ef0. It turned out that the controller had problem running at the higher speed, so go back to trusting the hardware capability bits. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-12-31sdhci: activate led support also when moduleÉric Piel
CONFIG_LEDS_CLASS is defined only if led-class is built-in, otherwise when it is a module the option is called CONFIG_LEDS_CLASS_MODULE. Led support should also be activated in this case. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: force high speed capability on some controllersPierre Ossman
Some high speed capable controllers forget to set the high speed capability bit. Make sure we enable the functionality anyway. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: handle bug in JMB38x for sizes < 4 bytesPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-26drivers/mmc/host/sdhci.h needs scatterlist.hAndrew Morton
alpha: drivers/mmc/host/sdhci.h:242: error: field 'sg_miter' has incomplete type Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23sdhci: highmem capable PIO routinesPierre Ossman
Improve the PIO handling so that it can service highmem pages. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: scatter-gather (ADMA) supportPierre Ossman
Add support for the scatter-gather DMA mode present on newer controllers. As the mode requires 32-bit alignment, non-aligned chunks are handled by using a bounce buffer. Also add some new quirks to handle controllers that have bugs in the ADMA engine. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: handle hot-removePierre Ossman
Gracefully handle when the device is suddenly removed. Do a test read and avoid any further access if that read returns -1. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: make workaround for timeout bug more generalPierre Ossman
Give the quirk for broken timeout handling a better chance of handling more controllers by simply classifying the system as broken and setting a fixed value. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: move pci stuff to separate modulePierre Ossman
The SDHCI interface is not PCI specific, yet the Linux driver was intimitely connected to the PCI bus. This patch properly separates the PCI specific portion from the bus independent code. This patch is based on work by Ben Dooks but he did not have time to complete it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-05-13mmc: make one-bit signed bitfields unsignedHarvey Harrison
Otherwise it can only take the values 0/-1 which doesn't seem to have been intended. drivers/mmc/host/sdhci.h:190:20: error: dubious one-bit signed bitfield Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18sdhci: allow led to be controlled freelyPierre Ossman
Hook up the controller LED to the LED subsystem, allowing more flexible control than simply indicating an ongoing request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18sdhci: remove custom controller namePierre Ossman
Remove the use of the sdhci specific device name and use the mmc controller name instead. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-02-08sdhci: add num index for multi controllers caseFeng Tang
Some devices have several controllers; need add the index info to device slot name host->slot_desc[] Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-12sdhci: use PIO when DMA can't satisfy the requestPierre Ossman
Some controllers have been designed on the assumption that all transfers will be 32-bit aligned, both in start address and in size. This is not a guarantee the SDHCI specification provides and not one we can provide. Revert back to PIO for individual requests in order to work around the hardware bug. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-03sdhci: fix a typoNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23sdhci: handle data interrupts during commandPierre Ossman
It is fully legal for a controller to start issuing data related interrupts before it has signalled that the command has completed. Make sure the driver actually can handle this. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: update header file pathsPierre Ossman
Make sure all headers in the files reflect their true position in the tree. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-20sdhci: make sure to clear the error interruptPierre Ossman
The controller has a bit indicating that one of the higher bits (the error bits) are set. A previous bug caused this bit to be masked, but since that bug has been fixed we have to clear it explicictly. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01mmc: Move host and card drivers to subdirsPierre Ossman
Clean up the drivers/mmc directory by moving card and host drivers into subdirectories. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>