aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/Kconfig
AgeCommit message (Collapse)Author
2009-04-06Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06[MTD] [NAND] Add support for NAND on the Socrates boardWolfgang Grandegger
Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] [NAND] pxa3xx_nand: allow building as moduleMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] TXx9 SoC NAND Flash Memory Controller driverAtsushi Nemoto
This patch adds support for the integrated NAND flash controller of the TXx9 family. Once upon a time there were tx4925ndfmc and tx4938ndfmc driver. They were removed due to bitrot in 2005. This new driver is completely rewritten based on a driver in CELF patch archive. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Bächle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] [NAND] davinci_nand driverDavid Brownell
This is a device driver for the NAND flash controller found on the various DaVinci family chips. It handles up to four SoC chipselects, and some flavors of secondary chipselect (e.g. based on upper bits of the address bus) as used with some multichip packages. (Including the 2 GiB chips used on some TI devel boards.) The 1-bit ECC hardware is supported (3 bytes ECC per 512 bytes data); but not yet the newer 4-bit ECC (10 bytes ECC per 512 bytes data), as available on chips like the DM355 or OMAP-L137 and needed with the more error-prone MLC NAND chips. This is a cleaned-up version of code that's been in use for several years now; sanity checked with the new drivers/mtd/tests. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30x86: allow more than 8 cpus to be used on 32-bitYinghai Lu
X86_PC is the only remaining 'sub' architecture, so we dont need it anymore. This also cleans up a few spurious references to X86_PC in the driver space - those certainly should be X86. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: rename X86_GENERICARCH to X86_32_NON_STANDARDIngo Molnar
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures that are not included in the default build. Rename it to X86_32_NON_STANDARD. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05[MTD] [NAND] ndfc driverSean MacLennan
The current ndfc driver only compiles under arch/ppc. This arch was removed from the kernel. I notice the event entry for the ndfc in Kconfig has been removed in 2.6.28. This patch converts the ndfc to a proper OF (OpenFirmware) driver. I can give a working example of the DTS if needed. The patch has been in production use on the PIKA Warp Appliance and is in use by others. The Warp basically boots from NAND, so the ndfc driver is very important to us. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Acked-By: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-16[ARM] MX3: add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-20[MTD] [NAND] GPIO driver depends on ARM... for now.David Woodhouse
Not all architectures provide readsb(). We should probably move to using ioread8_rep() instead. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18[MTD] [NAND] GPIO NAND flash driverMike Rapoport
The patch adds support for NAND flashes connected to GPIOs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-14[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTLYoshihiro Shimoda
Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash. This driver support SH7723. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-10[MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGEKumar Gala
Removed the Kconfig associated with 'NDFC NanD Flash Controller'. We can't enable !CONFIG_PPC_MERGE so there is no way to enable this. Additionally the code needs to get updated for arch/powerpc. For the time being lets just remove the Kconfig option so we can actually remove CONFIG_PPC_MERGE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-10[MTD] [NAND] driver extension to support NAND on TQM85xx modulesWolfgang Grandegger
This patch extends the FSL UPM NAND driver from Anton Vorontsov to support hardware which does not have the R/B pin of the NAND chip connected, like the TQM8548 module: - The OF_GPIO dependency has been removed from the Kconfig option because GPIO is not needed. The relevant gpio_* function are then stubbed out in <linux/gpio.h>. - It re-introduces the chip-delay property to define an appropriate maximum delay time (tR) required for read operations. The binding will be documented in a separate patch. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-02[MTD] [NAND] Freescale i.MX2 NAND driverSascha Hauer
This patch adds support for the integrated NAND flash controller of the i.MX2 and i.MX3 family. It is tested on MX27 but should work on MX3 aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01[MTD] [NAND] pxa3xx_nand: allow to disable builtin flash-type tableEnrico Scholz
This patch adds a MTD_NAND_PXA3xx_BUILTIN configuration variables which allows to disable usage of builtin flash-type table. Not enabling this option saves some space in the generated driver. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-12Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-arm/arch-omap/onenand.h
2008-08-10mfd: have TMIO drivers and subdevices depend on ARMSamuel Ortiz
The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: driver for the TMIO NAND controllerIan Molton
This patch adds support for the NAND controller commonly found in TMIO based MFDs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-04[MTD] Remove references to TI 'toto' platform.David Woodhouse
This was a reference board for which support never got merged upstream. Kill it off, at rmk's suggestion. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by defaultMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the ↵Mike Frysinger
Blackfin bootrom uses Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] atmel_nand can be modularDavid Brownell
There's no reason to prevent the Atmel NAND driver from building as a module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-06-07[MTD] [NAND] atmel_nand: make available on AVR32Håvard Skinnemoen
Make the atmel_nand driver selectable on AVR32, and update the Kconfig help text to reflect this. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-07[MTD] [NAND] rename at91_nand -> atmel_nand: file names and KconfigHåvard Skinnemoen
The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04MTD/JFFS2: remove CVS keywordsAdrian Bunk
Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260Richard Genoud
This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] FSL UPM NAND driverAnton Vorontsov
This is very simple driver, NAND is connected through localbus, and User-Programmable Machine is doing various adjustments to speak NAND. No special efforts needed to do read and write cycles, though to control ALE and CLE phases, we ask UPM to generate exact pre-programmed signals on the localbus lines. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] support for pxa3xxeric miao
This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-03-27plat-orion: make orion_nand available for all Orion familiesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-02-07[MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.Scott Wood
Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03[MTD] [NAND] Marvell Orion device bus NAND controllerTzachi Perelstein
Driver for the device bus NAND controller in the Marvell Orion family of ARM SoCs. Signed-off-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-29[MTD] [NAND] pasemi_nand driverEgor Martovetsky
Plumbing for NAND connected via localbus on PA Semi PWRficient-based boards. From: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-30[MTD] [NAND] Add Blackfin BF52x support in bf5xx_nand driverMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20[MTD] Fix typo in Alauda config option help text.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13[MTD] [NAND] Blackfin on-chip NAND Flash Controller driverBryan Wu
This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-29[MTD] [NAND] Driver for Olympus MAUSB-10 and Fujifilm DPC-R1 card readersJörn Engel
Unlike most stuff on the market the chip inside these two allows raw flash access and doesn't implement and FTL, leaving that functionality to the device driver. Raw flash access in a cheap USB cardreader! An MTD test device one can attach to a PC! What a deal! The command set of the chip is not documented, so information was obtained from the existing mass-storage driver (drivers/usb/storage/alauda.c), its documentation (http://alauda.sourceforge.net/wikka.php?wakka=BulkCommandReference), additional reverse engineering and comparison with a vendor driver for a related chip (http://www.ratocsystems.com/english/download/driver/linux/sma03u.html). Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-23Merge branch 'mtd-2.6.24' of ↵David Woodhouse
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
2007-08-22[MTD] 4xx: Don't build arch/ppc dependent drivers in arch/powerpcJosh Boyer
These drivers are specific to 4xx support in arch/ppc at the moment. Make sure they don't get built on arch/powerpc. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[MTD] [NAND] cafe_nand.c: the OLPC laptop is not available for $100Adrian Bunk
The price might drop to $100 in a few years. But currently, a more reasonable name might be "$175 laptop". Let's simply call it "OLPC laptop" without any price tag. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] [NAND] Change NDFC driver to support 405 platforms tooStefan Roese
This patch adds 405 platform support to the 440 NDFC driver. The new AMCC 405EZ PPC is equipped with the same NDFC core as the 440EP(x) and other will follow soon. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-08[MTD] [NAND] platform NAND driver: add driverVitaly Wool
This patch adds support for generic platform NAND driver. Updated after tglx's review/discussion in IRC #mtd channel. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02[MTD] [NAND] Use rslib for CAFÉ ECCSegher Boessenkool
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27[MTD] [NAND] CM-x270 MTD driverMike Rapoport
This patch provides MTD support for NAND flash devices on CM-x270 modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19Use menuconfig objects: MTDJan Engelhardt
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[MTD] [NAND] Move ancient NAND chip support into a config optionThomas Gleixner
The support for obsolete ancient NAND chips adds .data size and one of the old ids conflicts with a modern one. Make the support for such chips depending on a config option. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-11[MTD] [NAND] eXcite nand flash driverThomas Koeller
This is a nand flash driver for the eXcite series of intelligent cameras manufactured by Basler Vision Technologies AG. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-09[MTD] [NAND] S3C2410: Hardware ECC correction codeBen Dooks
Add support for correcting errors detected by the hardware ECC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-05[MTD NAND] CAFÉ controller depends, perhaps unsurprisingly, on NANDDavid Woodhouse
Noticed by Ingo. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-05[MTD] NAND: use SmartMedia ECC byte order for ndfcTimo Lindhorst
Select MTD_NAND_ECC_SMC (ECC byte order according to the Smart Media Specification) if MTD_NAND_NDFC is used. Using the wrong byte order causes fatal, unnoticed data damage. For further information see: http://lists.infradead.org/pipermail/linux-mtd/2006-November/016920.html Signed-off-by: Timo Lindhorst <lindhors@linux.vnet.ibm.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 09:24:22 +0000