aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2009-07-15UBI: fix bug in image sequence number handlingHolger Brunck
This patch fixes a bug in the image seq. number handling in the scanning level. The assignment of the image_seq was incorrect. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-15UBI: gluebi: initialize ubi_num fieldArtem Bityutskiy
Do not forget to initialize 'gluebi->ubi_num' because otherwise it will stay 0 even for ubi1 device, and gluebi will open wrong UBI device when 'gluebi_get_device()' is called. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-08UBI: fix compilation warningsArtem Bityutskiy
The recent "UBI: fix NOR flash recovery" introduced compilation warnings which were immediately spotted by our linux-next keeper. This patch fixes them. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-07UBI: fix NOR flash recoveryArtem Bityutskiy
This commit fixes NOR flash recovery issues observed with Spansion S29GL512N NOR. When NOR erases, it first fills PEBs with zeroes, then sets all bytes to 0xFF. Filling with zeroes starts from the end of the PEB. And when power is cut, this results in PEBs containing correct EC and VID headers but corrupted with zeros at the end. This confuses UBI and it mistakinly accepts these PEBs and associate them with LEBs. Fis this issue by zeroing EC and VID magics before erasing PEBs, to make UBI later refuse zem. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05UBI: nicify image sequence number handlingArtem Bityutskiy
Move the image seq. number handling from I/O level to the scanning lever, where it really belongs to. Move the @image_seq_set variable to the @struct ubi_scan_info structure, which exists only during scanning. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05UBI: add image sequence number to EC headerAdrian Hunter
An image sequence number is added to the UBI erase-counter header to be able determine if the root file system contains a mixture of old and new images (because the flashing failed to complete). A change to nolo is also needed for this to take effect. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05UBI: remove bogus debugging checksArtem Bityutskiy
The 'paranoid_check_empty()' is bogus because, which is easilly seen on NOR flash, which has long erase cycles, and which may easilly end-up with half-erased eraseblocks. In this case the paranoid check fails. I is just wrong to assume that PEBs which do not have EC headers always contain all 0xFF. Such assumption should not be made on the I/O level, which is quite low. Thus, just kill the check. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05UBI: add empty eraseblocks verificationArtem Bityutskiy
This patch adds code which makes sure eraseblocks contain all 0xFF bytes before starting using them. The verification is done only when debugging checks are enabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-28mtd: nand: fix build failure and incorrect return from omap_wait()vimal singh
We need to include jiffies.h manually in some cases, and the status returned from omap_wait() was broken in two separate ways. Also add cond_resched() to the loop. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-27mtd: Use BLOCK_NIL consistently in NFTL/INFTLJulia Lawall
Use BLOCK_NIL consistently rather than sometimes 0xffff and sometimes BLOCK_NIL. The semantic patch that finds this issue is below (http://www.emn.fr/x-info/coccinelle/). On the other hand, the changes were made by hand, in part because drivers/mtd/inftlcore.c contains dead code that causes spatch to ignore a relevant function. Specifically, the function INFTL_findwriteunit contains a do-while loop, but always takes a return that leaves the loop on the first iteration. // <smpl> @r exists@ identifier f,C; @@ f(...) { ... return C; } @s@ identifier r.C; expression E; @@ @@ identifier r.f,r.C,I; expression s.E; @@ f(...) { <... ( I | - E + C ) ...> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-26mtd: m25p80 timeout too short for worst-case m25p16 devicesSteven A. Falco
The m25p16 data sheet from numonyx lists the worst-case bulk erase time (tBE) as 40 seconds. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-25mtd: atmel_nand: Fix typo s/parititions/partitions/Thadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-25mtd: cmdlineparts: Use 64-bit format when printing a debug message.Thadeu Lima de Souza Cascardo
Commit 69423d99fc182a81f3c5db3eb5c140acc6fc64be ("[MTD] update internal API to support 64-bit device size") has changed some structure values to 64-bit and has not updated this debug message, since it's not built by default. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-24mtd: maps: Remove BUS_ID_SIZE from integrator_flashDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
2009-06-17Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: (21 commits) UBI: add reboot notifier UBI: handle more error codes UBI: fix multiple spelling typos UBI: fix kmem_cache_free on error patch UBI: print amount of reserved PEBs UBI: improve messages in the WL worker UBI: make gluebi a separate module UBI: remove built-in gluebi UBI: add notification API UBI: do not switch to R/O mode on read errors UBI: fix and clean-up error paths in WL worker UBI: introduce new constants UBI: fix race condition UBI: minor serialization fix UBI: do not panic if volume check fails UBI: add dump_stack in checking code UBI: fix races in I/O debugging checks UBI: small debugging code optimization UBI: improve debugging messages UBI: re-name volumes_mutex to device_mutex ...
2009-06-16mtd: OneNAND: Allow setting of boundary information when built as moduleAmul Saha
This patch unifies the flex_bdry setting for module vs. built-in configuration of OneNAND. Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com> Signed-off-by: Vishak G <vishak.g@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12trivial: mtd: fix Kconfig comment about 'armflash'Paulius Zaleckas
The real 'armflash' map driver is selected by CONFIG_MTD_ARM_INTEGRATOR Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-11Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
2009-06-10UBI: add reboot notifierKevin Cernekee
Terminate the UBI background thread prior to restarting the system. [Artem: amended comments a little] Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10UBI: handle more error codesArtem Bityutskiy
The UBIFS WL worker may encounter read errors and there is logic which makes a decision whether we should do one of: 1. cancel the operation and move the PEB with the read errors to the 'erroneous' list; 2. switch to R/O mode. ATM, only -EIO errors trigger 1., other errors trigger 2. The idea is that if we know we encountered an I/O error, do 1. Otherwise, we do not know how to react, and do 2., just in case. E.g., if the underlying driver became crazy because of a bug, we do not want to harm any data, and switch to R/O mode. This patch does 2 things: 1. Makes sure reads from the source PEB always cause 1. This is more consistent with other reads which come from the upper layers and never cause R/O. 2. Teaches UBI to do 1. also on -EBADMSG, UBI_IO_BAD_VID_HDR, -ENOMEM, and -ETIMEOUT. But this is only when reading the target PEB. This preblems were hunted by Adrian Hunter. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10UBI: fix multiple spelling typosArtem Bityutskiy
Some of the typos were indicated by Adrian Hunter, some by 'aspell'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10UBI: fix kmem_cache_free on error patchArtem Bityutskiy
'kmem_cache_free()' oopeses if NULL is passed, and there is one error-path place where UBI may call it with NULL object. This problem was pointed to by Adrian Hunter. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09UBI: print amount of reserved PEBsArtem Bityutskiy
When marking a PEB as bad, print how many PEBs are left reserved. This is very useful information. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09mtd: nand: Fix memory leak on txx9ndfmc probe failure.Atsushi Nemoto
Commit 81933046ef2a615031c46171013bde2c5225ee69 ('mtd: Fix handling of mtdname in txx9ndfmc.c') introduced a potential memory leak. The 'mtdname' member of the private data structure is now allocated separately, but was not freed on certain error paths. Fix that, and make things simpler by _always_ allocating it separately so that we don't need 'if (mtdname != dev_name()) kfree(mtdname);'... which gets ugly now that we're doing it more than once, and more likely that we'll get it wrong some time. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08Merge branch 'for-rmk' of git://git.marvell.com/orion into develRussell King
2009-06-08mtd: orion_nand: use burst reads with double word accessesNicolas Pitre
This is not 8 times faster than byte access, but still around 60% faster. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08mtd/nand: s3c6400 support for s3c2410 driverPeter Korsgaard
Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linuxDavid Woodhouse
2009-06-08[MTD] [NAND] S3C2410: Use DIV_ROUND_UPBen Dooks
Change to using DIV_ROUND_UP() in the timing calculation instead of blindly doing result++ Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08[MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/writeBen Dooks
Add code to deal with fractional lengths, as reported by Werner Almesberger. Re-work of his original patch. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08[MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NANDMichel Pollet
Added a flag to allow the machine code to tell the NAND subsystem that it should try to pickup a BBT from the flash, and also skip the NAND full scan at startup. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08UBI: improve messages in the WL workerArtem Bityutskiy
Print not only the PEB number, but also the LEB number and volume id, which is very useful for bug hunting. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-06mtd: physmap_of: Add multiple regions and concatenation supportStefan Roese
This patch adds support to handle multiple non-identical chips in one flash device tree node. It also adds concat support to physmap_of. This makes it possible to support e.g. the Intel P30 48F4400 chips which internally consists of 2 non-identical NOR chips on one die. Additionally partitions now can span over multiple chips. To describe such a chip's, multiple "reg" tuples are now supported in one flash device tree node. Here an dts example: flash@f0000000,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000 0 0x02000000 0x02000000>; bank-width = <2>; partition@0 { label = "test-part1"; reg = <0 0x04000000>; }; }; Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: nand: max_retries off by one in mxc_nandRoel Kluin
with `while (max_retries-- > 0)' max_retries reaches -1 after the loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440Peter Korsgaard
Use the correct S3C2440_NFCONF_* macros for the mask for the 2412/2440 variants instead of the 2410 ones which use wrong bit positions. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: davinci nand: update clock namingKevin Hilman
DaVinci clock support has been updated in mainline. Update clock names accordingly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05mtd: onenand: add bbt_wait & unlock_all as replaceable for some platformKyungmin Park
Add bbt_wait & unlock_all as replaceable for some platform such as s3c64xx s3c64xx has its own OneNAND controller and another interface Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: Flex-OneNAND supportRohit Hagargundgi
Add support for Samsung Flex-OneNAND devices. Flex-OneNAND combines SLC and MLC technologies into a single device. SLC area provides increased reliability and speed, suitable for storing code such as bootloader, kernel and root file system. MLC area provides high density and is suitable for storing user data. SLC and MLC regions can be configured through kernel parameter. [akpm@linux-foundation.org: export flexoand_region and onenand_addr] Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Vishak G <vishak.g@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: nand: add OMAP2/OMAP3 NAND driverVimal Singh
This driver is present in the OMAP tree, now pushing it to MTD. Original author(s): Jian Zhang <jzhang@ti.com> Signed-off-by: Vimal Singh <vimalsingh@ti.com> Cc: Jian Zhang <jzhang@ti.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: maps: Blackfin async: fix memory leaks in probe/remove funcsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: uclinux: mark local stuff staticMike Frysinger
The uclinux_ram_mtdinfo, uclinux_romfs, and uclinux_point symbols do not need to be visible outside of this module, so mark them static. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Greg Ungerer <gerg@uclinux.org> CC: uclinux-dev@uclinux.org CC: linux-mtd@lists.infradead.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: uclinux: do not allow to be built as a moduleMike Frysinger
There isn't any benefit to building the uClinux MTD map as a module as the rootfs it requires in order to actually be usable is appended to the kernel image, not the module. No known system builds it this way either, so change the option to "bool". Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Paul Mundt <lethal@linux-sh.org> CC: Greg Ungerer <gerg@uclinux.org> CC: uclinux-dev@uclinux.org CC: linux-mtd@lists.infradead.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: uclinux: allow systems to override map addr/sizeMike Frysinger
Due to a processor anomaly (05000263 to be exact), most Blackfin parts cannot keep the embedded filesystem image directly after the kernel in RAM. Instead, the filesystem needs to be relocated to the end of memory. As such, we need to tweak the map addr/size during boot for Blackfin systems. This can be done in any early arch/board init code. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Paul Mundt <lethal@linux-sh.org> CC: Greg Ungerer <gerg@uclinux.org> CC: uclinux-dev@uclinux.org CC: linux-mtd@lists.infradead.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITsCliff Cai
The DMAs have different bit sizes on BF52x and BF54x. From the PHRM: "The 16-bit DMA Access Bus (DAB) connects the DMA controller to the on-chip peripherals, PPI, SPI, Ethernet MAC, the SPORTs, NFC, HOSTDP and the UARTs." 32-bit DMA won't work for BF52x. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: blackfin NFC: remove pointless return value in bf5xx_nand_dma_rwMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05mtd: add on-flash BBT support for Atmel NAND driverSimon Polette
Just add a new on-flash-bbt module parameter. Signed-off-by: Simon Polette <spolette@adetelgroup.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>