aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (23 commits) pcmcia: Fix ide-cs sparse warning pcmcia: ide-cs debugging bugfix pcmcia: allow for longer CIS firmware files pcmcia: cm40x0 cdev lock_kernel() pushdown pcmcia: (re)move {pcmcia,pccard}_get_status pcmcia: kill IN_CARD_SERVICES pcmcia: Remove unused header file code pcmcia: remove unused bulkmem.h pcmcia: simplify pccard_validate_cis pcmcia: carve out ioctl adjust function to pcmcia_ioctl pcmcia: irq probe can be done without risking an IRQ storm pcmcia: Fix ti12xx_2nd_slot_empty always failing pcmcia: check for pointer instead of pointer address pcmcia: switch cm4000_cs.c to unlocked_ioctl pcmcia: simplify rsrc_nonstatic attributes pcmcia: add support CompactFlash PCMCIA support for Blackfin. pcmcia: remove version.h pcmcia: cs: kill thread_wait pcmcia: i82365.c: check request_irq return value pcmcia: fix Alchemy warnings ...
2008-06-24pcmcia: (re)move {pcmcia,pccard}_get_statusDominik Brodowski
Except for one debug message in a driver marked BROKEN, pcmcia_get_status is only used by the ioctl. Therefore, move it to pcmcia_ioctl.c and unexport it. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-06-24pcmcia: remove unused bulkmem.hMagnus Damm
The code in include/pcmcia/bulkmem.h was only kept for compatibility reasons. Therefore, move the remaining region_info_t definition to ds.h [linux@dominikbrodowski.net: do not modify the IOCTL, move definition to ds.h, and update changelog] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-06-24pcmcia: simplify pccard_validate_cisDominik Brodowski
As cisinfo_t only contains one unsigned_int, pccard_validate_cis can be simplified by passing that around directly. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-06-06Merge git://git.infradead.org/~dwmw2/mtd-2.6.26Linus Torvalds
* git://git.infradead.org/~dwmw2/mtd-2.6.26: [MTD] m25p80.c mutex unlock fix
2008-06-06Fix various old email addresses for dwmw2David Woodhouse
Although if people have questions about ARCnet, perhaps it's _better_ for them to be mailing dwmw2@cam.ac.uk about it... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06[MTD] m25p80.c mutex unlock fixChen Gong
fix a mutex release bug in function m25p80_write. Signed-off-by: Chen Gong <g.chen@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-05[MTD] [MAPS] Fix cmdlineparse handling in mapping filesKyungmin Park
Now it returns the 0 if cmdlineparse not supplied. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04[MTD] [NAND] pxa: fix incorrect calling of pxa3xx_nand_config() on resume pathEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-27ck804rom: fix driver_data in probe table.David Woodhouse
There's a reason why using C99 initialisers even in the supposedly trivial structs is a good idea. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08mtd: solutionengine flash map depends on solution engine mach group.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: remove the broken SH_MPC1211 supportAdrian Bunk
SH_MPC1211 has been marked as BROKEN for some time. Unless someone is working on reviving it now, I'd therefore suggest this patch to remove it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-01Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD][NOR] Add physical address to point() method [JFFS2] Track parent inode for directories (for NFS export) [JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean. [JFFS2] Quiet lockdep false positive. [JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once() [MTD] Delete long-unused jedec.h header file. [MTD] [NAND] at91_nand: use at91_nand_{en,dis}able consistently.
2008-05-01[MTD][NOR] Add physical address to point() methodJared Hulbert
Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace code from flash. Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-28drivers: fix integer as NULL pointer warningsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-26[MTD] [NAND] at91_nand: use at91_nand_{en,dis}able consistently.Atsushi Nemoto
Use at91_nand_enable(), at91_nand_disable() to manipulate enable_pin. No functional changes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] m25p80: Add Support for ATMEL AT25DF641 64-Megabit SPI FlashMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] m25p80: add FAST_READ access support to M25PxxBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] [NAND] bf5xx_nand: Avoid crash if bfin_mac is installed.Michael Hennerich
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4053 Singed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] [NAND] at91_nand: control NCE signalAtsushi Nemoto
This driver did not control NCE signal during normal operations (only enable NCE on probing and disable NCE on removing). This patch make NCE signal inactive on idle state. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25[MTD] [NAND] AT91 hardware ECC compile fix for at91sam9263 / at91sam9260Richard Genoud
The sam926x docs allegedly don't list an "ECC_PARITY" field, and the header files in the upstream kernel don't have it either. Masking with it was useless anyway, so just remove it. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260Richard Genoud
This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23UBI: add a messageArtem Bityutskiy
UBI scan takes quite a time on some systems, so it is nice to print a message that we started attaching an MTD device. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23Merge git://git.infradead.org/~dedekind/ubi-2.6David Woodhouse
2008-04-23[MTD] Clean up AR7 partition map supportDavid Woodhouse
drivers/mtd/ar7part.c: In function ‘create_mtd_partitions’: drivers/mtd/ar7part.c:69: warning: passing argument 4 of ‘master->read’ from incompatible pointer type drivers/mtd/ar7part.c:91: warning: passing argument 4 of ‘master->read’ from incompatible pointer type drivers/mtd/ar7part.c:99: warning: passing argument 4 of ‘master->read’ from incompatible pointer type drivers/mtd/ar7part.c:110: warning: passing argument 4 of ‘master->read’ from incompatible pointer type drivers/mtd/ar7part.c:111: error: ‘SQUASHFS_MAGIC’ undeclared (first use in this function) drivers/mtd/ar7part.c:111: error: (Each undeclared identifier is reported only once drivers/mtd/ar7part.c:111: error: for each function it appears in.) Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23[MTD] [NOR] Fix Intel CFI driver for collie flashThomas Kunze
collie seems to contain LH28F640BF flash chips. According to http://sharp-world.com/products/device/flash/pdf/*FUM00701*@E.pdf (page 83) if they have 0x51 of Extended Query Table (number of hardware partitions) set to zero, they have a single fixed partition. This patch makes those chips work. Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] Verify probe by retrying to checking the results matchBen Dooks
With modern systems using bus-hold instead of bus pull-up, it can often lead to erroneous reporting of NAND devices where there are none. Do a double probe to ensure that the result we got the first time is repeatable, and if it is not then return that there is no chip there. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] S3C2410 Allow ECC disable to be specified by the boardBen Dooks
Add support to disable ECC checking for a given chip when passed by the board via the platform data. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] S3C2410 Allow ECC layout to be passed through platform dataBen Dooks
Add support for the ECC layout to be passed via the platform data specified by the board. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] S3C2410 Allow unset ecc to be ignored for ecc correctionBen Dooks
If a block's ecc field is all 0xff, then ignore the ECC correction. This is for systems where some of the blocks, such as the initial cramfs are written without ECC and need to be loaded on start. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] S3C2410 Large page NAND supportBen Dooks
This adds support for using large page NAND devices with the S3C24XX NAND controller. This also adds the file Documentation/arm/Samsung-S3C24XX/NAND.txt to describe the differences. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] S3C2410 Fix previous nFCE suspend save patchBen Dooks
Commit 03680b1e00d146df718c8a4eac34438566b70c85 incorrectly was assuming S3C2410_NFCONF was being used to select the NAND chip. Fix this error by ising the sel_reg. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [OneNAND] Allow for controller errors when readingAdrian Hunter
A power loss while writing can result in a page becoming unreadable. When the device is mounted again, reading that page gives controller errors. Upper level software like JFFS2 treat -EIO as fatal, refusing to mount at all. That means it is necessary to treat the error as an ECC error to allow recovery. Note that typically in this case, the eraseblock can still be erased and rewritten i.e. it has not become a bad block. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [MAPS] omap_nor section fixesDavid Brownell
Minor tweaks to omap_nor ... as with most platform drivers, its probe and remove logic can (and should!) safely vanish in most configs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NOR] Fixup for incorrect CFI data in Spansion S29GL064/32N flash chipsTrent Piepho
This is a known erratum confirmed by Spansion. I have an errata document, but I can't find a link to it anywhere on their site to include here. Some of the S29GL064N chips report 64 sectors when they should report 128, and some of S29GL032N chips report 127 sectors when they should report 63. Note that when the chip dies are fixed by Spansion, they will still have the same id. The fix is done in such a way that it won't affect corrected chips. The fixups use the extended id made available by a previous patch. Without that, virtually all newer AMD/Spansion chips will have the same ID (0x227e) and it's not possible to apply the fixup to the correct chips. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NOR] Read extended device ID from AMD/Spansion CFI flash chipsTrent Piepho
AMD/Spansion use a device id of 0x7e to indicate an extended device is present at offset 0xe and 0xf in the query data. I've verified with Spansion that all their chips (mfr == 0x01) with an id of 0x7e use it to indicate an extended id is present. What's more, there are no chips with a NON-extended id that is the same as a different chip's extended id. In other words, when the extended ID is present, one can replace the normal id with the extended id without losing any information. Which is what I've done. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] fsl_elbc_nand: workaround for hangs during nand writeAnton Vorontsov
Using current driver elbc sometimes hangs during nand write. Reading back last byte helps though (thanks to Scott Wood for the idea). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] plat_nand: set mtd->nameHamish Moffatt
This patch sets mtd->name to the platform bus ID in the plat_nand driver, so that you can specify partitions readily with mtdparts=. Currently it relies on nand_base filling in the name from the device, which results in names like "NAND 256MiB 3,3V 8-bit", that you can't use with cmdlineparts. Signed-off-by: Hamish Moffatt <hamish@cloud.net.au> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] corrected MPC8313 NAND fixesMike Hench
Fix a race condition in fsl_elbc_run_command Fix incorrect usage of clearbits32 that bashed option register Remove work around for bashed register Signed-off-by: Mike Hench <mhench@elutions.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] fsl_elbc_nand: fix mtd nameAnton Vorontsov
Currently fsl_elbc_nand doesn't initialize mtd->name, and this causes nand_get_flash_type() to assign name that is equal to chip type, like this: root@b1:~# cat /proc/mtd dev: size erasesize name mtd0: 00800000 00010000 "fe000000.flash" mtd1: 02000000 00004000 "NAND 32MiB 3,3V 8-bit" mtd0 is physmap_of flash (normal name), and mtd1 is fsl_elbc_nand. Despite inconsistency, with mtd name like this specifying paritions from the kernel command line becomes a torture (though, I didn't tried and not sure if mtdparts= can handle spaces at all). Plus, this causes real bugs when multiple fsl_elbc_nand chips registered. With this patch applied fsl_elbc_nand chip will have proper name: root@b1:~# cat /proc/mtd dev: size erasesize name mtd0: 00800000 00010000 "fe000000.flash" mtd1: 02000000 00004000 "e0600000.flash" p.s. We can't use priv->dev->bus_id as in physmap_of, because fsl_elbc_nand pretends to be a localbus controller, so its bus_id is "address.localbus", which is incorrect and thus will also not work for multiple chips. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] AR7 mtd partition mapMatteo Croce
Signed-off-by: Matteo Croce <technoboy85@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] FSL UPM NAND driverAnton Vorontsov
This is very simple driver, NAND is connected through localbus, and User-Programmable Machine is doing various adjustments to speak NAND. No special efforts needed to do read and write cycles, though to control ALE and CLE phases, we ask UPM to generate exact pre-programmed signals on the localbus lines. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] Fix checkpatch errors in pxa3xx_nandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NOR] Add JEDEC support for the SST 36VF3203 flash chipAndrei Dolnikov
Add support for the SST 36VF3203 flash chip. It is used on Emerson KSI8560 board. Signed-off-by: Andrei Dolnikov <adolnikov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [MAPS] Extend plat-ram to support a supplied probe typeFlorian Fainelli
This enhances plat-ram to take a map_probes argument in the platform_data structure which allow plat-ram to support any direct-mapped device that MTD supports (jedec, cfi, amd ..) A few items are also fixed: - Don't panic if probes is 0 - Actually use the partition list that is passed in Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] XIP: Use generic xip_iprefetch() instead of asm volatile (...)Paulius Zaleckas
Untested, but shouldn't break anything... Makes MTD_XIP arch independent. I guess this is why xip_iprefetch() was made for. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [NAND] support for pxa3xxeric miao
This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] [OneNAND] unlikely(x) || unlikely(y) => unlikely(x || y)Roel Kluin
Acked-By: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] fix minor typo in the MTD map driver for SHARP SL seriesThomas Petazzoni
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22[MTD] cmdlinepart: Missing partition info is not an errorPeter Korsgaard
Return 0 partitions instead of -EINVAL on no mtdpart= argument in kernel cmdline or missing partition info for device. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>