aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/Kconfig
AgeCommit message (Collapse)Author
2005-10-03Merge branch 'upstream-fixes'Jeff Garzik
2005-09-27[NET]: Add Sun Cassini driver.David S. Miller
Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-23[netdrvr] delete CONFIG_PHYCONTROLJeff Garzik
2005-09-23[netdrvr gianfar] use new phy layerAndy Fleming
Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21Merge /spare/repo/linux-2.6/Jeff Garzik
2005-09-21Merge /spare/repo/linux-2.6/Jeff Garzik
2005-09-14[PATCH] Add rapidio net driverMatt Porter
Adds an "Ethernet" driver which sends Ethernet packets over the standard RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell access. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] skge: gmac register access errors in dual portStephen Hemminger
Merge of four previous patches and the Kconfig fix * Remove debug printk's * whitespace cleanup and version number change * clear interrupts, reset phy, and reset hardware on shutdown * ignore 64bit counter overflow interrupts * fix a couple of places where second port could clobber state of first port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14Merge /spare/repo/linux-2.6/ Jeff Garzik
2005-09-11[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor familyGreg Ungerer
Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06[PATCH] net: add driver for the NIC on Cell BladesJens Osterkamp
This patch adds a driver for a new 1000 Mbit ethernet NIC. It is integrated on the south bridge that is used for our Cell Blades. The code gets the MAC address from the Open Firmware device tree, so it won't compile on platforms other than ppc64. This is the first public release, so I don't expect the first version to get merged, but I'd aim for integration within the 2.6.13 time frame. Cc: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (15/22) Kconfig fix (82596)Al Viro
driver is non-modular Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: basic sis191 supportFrancois Romieu
The sis191 is the gigabit brother of the sis190. SiS's driver suggests that the register set is backward compatible: this should hopefully give a basic driver. The device should allow the usual features from a modern ethernet adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far the relevant register layout is not documented. SiS's driver does not provide these features either (at least not for Linux). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-31[ARM] 2866/1: add i.MX set_mctrl / get_mctrl functionsSascha Hauer
Patch from Sascha Hauer This patch adds support for setting and getting RTS / CTS via set_mtctrl / get_mctrl functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29/spare/repo/netdev-2.6 branch 'chelsio'Jeff Garzik
2005-08-29Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-29/spare/repo/netdev-2.6 branch 'sis190'Jeff Garzik
2005-08-24Merge upstream into 'upstream' branch of netdev-2.6.git.Jeff Garzik
Hand fix merge conflict in drivers/net/tokenring/Kconfig.
2005-08-23[PATCH] Kconfig fix (emac dependencient)Al Viro
emac doesn't build modular; ibm_emac_debug doesn't build at all (missing headers). Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-19[PATCH] SIS190 must select MIIAdrian Bunk
SIS190 must select MII since it's using it. While I was editing the Kconfig entry, I also converted the spaces to tabs. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-17[PATCH] sky2: new experimental Marvell Yukon2 driverStephen Hemminger
New driver for the Marvell Yukon2 Gigabit Ethernet chipset. This driver is based on the skge driver, but using the logic from the SysKonnect version of the sk98lin driver. It should support all the Yukon2 chipsets that are available in many current Intel and AMD motherboards. The driver does support ethtool, tx and rx checksum, and tcp segmentation offload. But it has only been tested for a short while and is known to stop receiving under heavy load. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30This patch adds a PHY Abstraction Layer to the Linux Kernel, enablingAndy Fleming
ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: resurrectionFrancois Romieu
Raise the sis190 driver from the dead The driver handles the integrated network device found on SiS 965L chipset. It follows the classical (non-napi) interrupt-driven model and provides minimal ethtool support. The code comes from a heavy cleanup/rewrite of the original code which was removed from the kernel on 14/04/2004. Since the r8169 driver does not work too bad and there will probably be (at least) a few months of improvements/testing/fixing, I made the code as close as possible to the r8169 one. Pascal Chapperon <pascal.chapperon@wanadoo.fr> deserves some special credit for testing and bug-catching. Many thanks to Lars Vahlenberg as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-27[NET]: Move in_aton from net/ipv4/utils.c to net/core/utils.cMatt Mackall
Move in_aton to allow netpoll and pktgen to work without the rest of the IPv4 stack. Fix whitespace and add comment for the odd placement. Delete now-empty net/ipv4/utils.c Re-enable netpoll/netconsole without CONFIG_INET Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-27[NET]: Improve presentation of networking driver families.Randy Dunlap
Suggestion from Sam Ravnborg <sam@ravnborg.org> It causes all driver families to be displayed aligned immediately under the main network drivers heading (in menuconfig/xconfig/gconfig) instead of not being subordinate to (i.e., not indented) the Network device support heading at all. The improved network driver families are: token ring, wireless, PCMCIA, WAN, ATM, and S390. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-19[NET]: NETCONSOLE must depend on INETAdrian Bunk
NETCONSOLE=y and INET=n results in the following compile error: net/built-in.o: In function `netpoll_parse_options': : undefined reference to `in_aton' net/built-in.o: In function `netpoll_parse_options': : undefined reference to `in_aton' Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-18[NET]: Kconfig: NETCONSOLE and NETPOLL togetherRandy Dunlap
Put NETCONSOLE and NETPOLL options together since they are related. This cuts down on the hassle of flipping back and forth between the Networking menu and the Network drivers menu to change their config settings. Tested with menuconfig, gconfig, and xconfig. gconfig has a small problem with this. I think that it's a bug in gconfig and I will take it up with Romain Lievin. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11[NET]: add a top-level Networking menu to *configSam Ravnborg
Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers/*/Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27[PATCH] cs89x0.c: support for Philips' pnx0105 network adapterdmitry pervushin
This patch is to provide support for cs89x0-based network device on Philips' pnx0105 board. Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-26[PATCH] document that 8139TOO supports 8129/8130Adrian Bunk
The 8129/8130 support is a sub-option that is not visible if the user hasn't enabled the 8139 support. Let's make it a bit easier for users to find the driver for their nic. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-06-22Merge /spare/repo/linux-2.6/Jeff Garzik
2005-06-04Automatic merge of /spare/repo/netdev-2.6 branch skge
2005-06-04Automatic merge of /spare/repo/netdev-2.6 branch remove-drivers
2005-06-04Automatic merge of /spare/repo/netdev-2.6 branch dm9000
2005-05-26Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
2005-05-26[BNX2]: New Broadcom gigabit network driver.Michael Chan
A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-15[PATCH] A new 10GB Ethernet Driver by Chelsio CommunicationsChristoph Lameter
A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-05-15[PATCH] DM9000 network driverSascha Hauer
This patch adds support for the davicom dm9000 network driver. The dm9000 is found on some embedded arm boards such as the pimx1 or the scb9328. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null drivers/net/dm9000.c
2005-05-15[PATCH] SIS900 must select MIIAdrian Bunk
This patch fixes the following compile error caused by bk-netdev: <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o(.text+0x98528): In function `sis900_get_settings': : undefined reference to `mii_ethtool_gset' drivers/built-in.o(.text+0x98538): In function `sis900_set_settings': : undefined reference to `mii_ethtool_sset' drivers/built-in.o(.text+0x98517): In function `sis900_get_link': : undefined reference to `mii_link_ok' drivers/built-in.o(.text+0x98547): In function `sis900_nway_reset': : undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Daniele Venzano <venza@brownhat.org>
2005-05-12 [PATCH] remove two obsolete net driversAdrian Bunk
The options FMV18X and SK_G16 do depend on the non-available CONFIG_OBSOLETE even in kernel 2.4 - IOW, the last time it was able to select them was in kernel 2.2 (or even before). Since it seems noone misses these drivers, this patch removes them. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-05-12[netdrvr] new driver skge, for SysKonnect cardsStephen Hemminger
2005-05-04[PATCH] ISA DMA Kconfig fixes - part 3Al Viro
Drivers that expect ISA DMA API are marked as such in Kconfig. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] ppc32: MV643XX ethernet is an option for PegasosBenjamin Herrenschmidt
This patch allows Kconfig to build the MV643xx ethernet driver on Pegasos (CONFIG_PPC_MULTIPLATFORM) and adds what I think is a missing fix from Dale's batch, that is remove SA_INTERRUPT and add SA_SHIRQ in there as the interrupt is shared if I understand things correctly. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Fabio Massimo Di Nitto <fabbione@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:11:49 +0000