aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/benet
AgeCommit message (Collapse)Author
2009-12-03be2net: Add support for ethtool self testSuresh R
This patch adds support for ethtool selftest. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Bump up the driver version numberAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Support for WoL using magic packet after suspend.Ajit Khaparde
Add support for WOL using Magic Packet after suspend is done. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Changes to print fw command opcode when command is failed by controller.Ajit Khaparde
When a firmware command fails, only the failure codes are printed. It is difficult to co-relate this to the actual command that has failed. These changes will now print the command code that has failed. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: remove use of skb_dma_map/unmapAlexander Duyck
Due to the fact that skb_dma_map/unmap do not work correctly when a HW IOMMU is enabled it has been recommended to go about removing the calls from the network device drivers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: fix unnecessary access to hardware to get link, port infoAjit Khaparde
Every time while doing ethtool->get_settings we are accessing the hardware to get link status and port information. This is not necessary. We now use the cached copy for this info and update it when the link status changes. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: Add be_rx_polls counterAjit Khaparde
Add be_rx_polls to count number of times NAPI called rx poll function. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: fix to allow port beacon when device is closedAjit Khaparde
port identification/beaconing is failing if device open has not been done. Fixing it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: check for valid ether addressAjit Khaparde
Allow only valid ether addresses to be assigned and used for the interface. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: initialize netdev->perm_addrAjit Khaparde
patch to initialize netdev->perm_addr Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: set netdev->vlan_features appropriatelyAjit Khaparde
patch to initialize netdev->vlan_features appropriately. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: remove BUG_ON() when be2net runs out of mccq wrbsSathya Perla
The driver can run out of mccq wrbs when completions don't arrive due to an unresponsive card. This must not hit a BUG_ON(); instead log a msg and return an error. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: Fix cleanup path in be_probe()Sathya Perla
Disabling msix was missing when probe fails after enabling msix. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: Issue fw_init/clean cmds to fwSathya Perla
These cmds are issued to the fw in probe/resume and remove/suspend paths to help fw execute some initialization and cleanup code. This change needed the be_hw_up() code to be refactored as be_get_config(). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: Fix rx_drops_no_fragments stat being incorrectly indexedSathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: support configuration of 64 multicast addresses instead of 32Sathya Perla
To send upto 64 addresses in the multicast-set cmd, the non-embeeded cmd format that provides for a bigger buffer is used instead of an embedded format. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20be2net: Patch to flash redboot section while firmware update.Sarveshwar Bandi
Please apply patch to update redboot section while firmware update. Code checks if section needs to be updated before actually doing it. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/usb/ems_usb.c
2009-11-06be2net: Bug fix to send config commands to hardware after netdev_registerAjit Khaparde
Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06be2net: fix to set proper flow control on resumeAjit Khaparde
If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/cdc_ether.c All CDC ethernet devices of type USB_CLASS_COMM need to use '&mbm_info'. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06be2net: Fix CQE_STATUS_EXTD_SHIFT defineSathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29be2net: Add the new PCI IDs to PCI_DEVICE_TABLE.Ajit Khaparde
This patch adds the PCI IDs for the next generation chip to the PCI_DEVICE_ID table. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28be2net: Changes to update ethtool get_settings function to return ↵Sarveshwar Bandi
appropriate values. Update ethtool get_settings function to: - get current link speed settings from controller - get port transceiver type from controller - fill appropriate values for supported, phy_address Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
2009-10-16be2net: Add support for next generation of BladeEngine device.Ajit Khaparde
Add new PCI ids to support next generation of BladeEngine device. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14be2net: fix support for PCI hot plugSathya Perla
Before issuing any cmds to the FW, the driver must first wait till the fW becomes ready. This is needed for PCI hot plug when the driver can be probed while the card fw is being initialized. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14be2net: fix promiscuous and multicast promiscuous modes being enabled alwaysSathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: Use netdev_alloc_skb_ip_align()Eric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12be2net: Implement ethtool get_phys_id function.Sarveshwar Bandi
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07be2net: Get rid of net_device_stats from adapter.Ajit Khaparde
adapter doesnot need to maintain a copy of net_device_stats. Use the one already available in net_device. This patch takes care of the same. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-06be2net: Bug fix to properly update ethtool tx-checksumming after ethtool -K ↵Ajit Khaparde
<ifname> tx off This is a fix for a bug which was a result of wrong use of checksum offload flag. The status of tx-checksumming was not changed from on to off after a 'ethtool -K <ifname> tx off' operation. Use the proper checksum offload flag NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Patch is against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Fix a typo in be_cmds.hAjit Khaparde
MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Bug Fix while accounting of multicast frames during netdev stats updateAjit Khaparde
While updating the statistics to be passed via the get_stats, tx multicast frames were being accounted instead of rx multicast frames. This patch fixes the bug. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05be2net: Fix a bug in preparation of mcc wrb which was causing flash ↵Ajit Khaparde
operation to fail This patch fixes a bug that got introduced in commit 76998bc7. During preparation of mcc wrb, req was being wrongly overwritten and the flash operation was failing. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05net: Convert ethtool {get_stats, self_test}_count() ops to get_sset_count()Ben Hutchings
These string query operations were supposed to be replaced by the generic get_sset_count() starting in 2007. Convert the remaining implementations. Also remove calls to these operations to initialise drvinfo->n_stats. The ethtool core code already does that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30be2net: Workaround to fix a bug in Rx Completion processing.Ajit Khaparde
vtp bit in RX completion descriptor could be wrongly set in some skews of BladEngine. Ignore this bit if vtm is not set. Resending because the previous patch was against net-next tree. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17be2net: fix some cmds to use mccq instead of mboxSathya Perla
All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07be2net: Code changes in Tx path to use skb_dma_map/skb_dma_unmapAjit Khaparde
Code changes to - In the tx completion processing, there were instances of unmapping a memory as a page which was originally mapped as single. This patch takes care of this by using skb_dma_map()/skb_dma_unmap() to map/unmap Tx buffers. - set gso_max_size to 65535. This was not done till now. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07be2net: Changes to support flashing of the be2 network adapterAjit Khaparde
Changes to support flashing of the be2 network adapter using the request_firmware() & ethtool infrastructure. The trigger to flash the device will come from ethtool utility. The driver will invoke request_firmware() to start the flash process. The file containing the flash image is expected to be available in /lib/firmware/ Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02drivers: Kill now superfluous ->last_rx storesEric Dumazet
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17be2net: destroy mcc queue before tx queuesSathya Perla
As mcc queue uses the tx event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17be2net: refactor be_msix_(un)register() code.Sathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17be2net: Set mac addr in hw regardless of netif_running()Sathya Perla
be_mac_addr_set() currently is broken when netif_running() is false. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13be2net:Creating/destroying queues regardless of netif_running() in ↵Sarveshwar Bandi
suspend/resume path Signed-off-by: sarveshwarb <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12be2net: clear & notify residual events before destroying event queuesSathya Perla
Any events rcvd after interrupts are disabled (in the driver unload path), must be cleared and notified before the event queues are destroyed Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 02:55:46 +0000