aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/benet
AgeCommit message (Collapse)Author
2010-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...
2010-04-01be2net: fix bug in vlan rx path for big endian architectureAjit Khaparde
vlan traffic on big endian architecture is broken. Need to swap the vid before giving packet to stack. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01be2net: fix flashing on big endian architecturesAjit Khaparde
Flashing is broken on big endian architectures like ppc. This patch fixes it. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01be2net: fix a bug in flashing the redboot sectionAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-27benet: Fix compile warnnings in drivers/net/benet/be_ethtool.cwzt wzt
Fix the following warnings: be_ethtool.c:493: warning: integer constant is too large for 'long' type be_ethtool.c:493: warning: integer constant is too large for 'long' type Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com> Acked-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15be2net: fix mccq create for big endian architecturesAjit Khaparde
The request to create an mccq was being dispatched without doing a byte swap of num_pages. This byte swap is necessary for Big Endian systems like PPC. Not having this fix leads mccq create to fail on BE ASICs running newer version of firmware, thereby causing driver initialization failure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove unused code in be_load_fwAjit Khaparde
This patch cleans up some unused code from be_load_fw(). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove usage of be_pci_funcAjit Khaparde
When PCI functions are virtuialized in applications by assigning PCI functions to VM (PCI passthrough), the be2net driver in the VM sees a different function number. So, use of PCI function number in any calculation will break existing code. This patch takes care of it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03be2net: download NCSI section during firmware updateSarveshwar Bandi
Adding code to update NCSI section while updating firmware on the controller. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02be2net: fix tx completion pollingSathya Perla
In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: Bump the driver version numberAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: Maintain tx and rx counters in driverAjit Khaparde
For certain skews of the BE adapter, H/W Tx and Rx counters could be common for more than one interface. Add Tx and Rx counters in the adapter structure (to maintain stats on a per interfae basis). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: update copyright datesAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: free tx buffers when completions never arriveSathya Perla
be2net: free tx buffers when completions never arrive In cases like when a pci device is disconnected on an error, pending tx completions will never arrive. Unmap and free such buffers in the tx cleanup path. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17be2net: implement pci shutdown handlerSathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17be2net: fix rx-path to ignore a flush completionSathya Perla
The flush compl (compl with numfrags == 0; no data) is rcvd from hw to indicate completion of RXQ destory operation. Fix the RX path to not process it as RX data. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17be2net: don't rearm mcc cq when device is not openSathya Perla
When an MCC cmd is issued (via a netdev/ethtool op) while the device is not open, the MCC CQ gets processed but the EQ is not processed (as isr is not registered.) This can cause the EQ to become full. So, while the device is not open, CQ must not be re-armed to prevent EQ entries. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17be2net: a mini optimization in rx_compl_process() codeSathya Perla
Introduce unlikely() for skb alloc failure and vlanf checks... Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-16be2net: set proper value to version field in req hdrAjit Khaparde
Before sending a command to the ASIC, set version properly. This is necessary for the ARM firmware to send correct data to the driver. This also fixes a bug in certain skews of the ASIC where the statistics are misreported. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15be2net: implement EEH pci error recovery handlersSathya Perla
The code has been tested on IBM pSeries server. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix in be_read_eepromAjit Khaparde
The offset to read the eeprom data was missing and wrong eeprom data was being dumped. This patch fixes this. >From Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: remove ASIC generation number from KconfigAjit Khaparde
Since the driver is supporting multiple generations of the ASIC don't mention any ASIC generation number. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: change the driver descriptionAjit Khaparde
Since the driver is supporting multiple generations of the ASIC remove ASIC generation information from the driver description. This information is displayed by modinfo. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: fix to limit max vlans supported in certain skewsAjit Khaparde
In certain skews the ASIC can support only 16 vlans per interface. Once the limit is crossed, the ASIC is programmed in vlan promiscuous mode. Switch off the vlan promiscuous mode once the number of vlans falls back to the max vlans supported. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: minor code optimizationsAjit Khaparde
Couple of code optimizations in the Rx path (to avoid a memset). From: Sathya P <sathyap@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix in be_change_mtuAjit Khaparde
Current code allows the new mtu to cross the supported value. This patch fixes the boundary checks. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix for flashing the BladeEngine3 ASICAjit Khaparde
Now flashing both BE2 and BE3 devices is supported. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: remove unused pci device idAjit Khaparde
We are not going to use this device id. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-02be2net: use eq-id to calculate cev-isr reg offsetSathya Perla
cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28be2net: Fix memset() arg ordering.David S. Miller
Noticed by Ben Hutchings. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-28be2net: Bug fix to support newer generation of BE ASICAjit Khaparde
Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23be2net: swap only first 2 fields of mcc_wrbSathya Perla
Only the first two fields of mcc wrb - embedded, payload_len need to be cpu_to_le32() swapped while issuing a cmd to the hw. The fields tag0, tag1 are opaque and returned back to cpu as is... Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-21be2net: fix bug in rx page postingSathya Perla
Pages are posted to the rxq in such a way that more than one frag can share the page. The last frag that uses the page unmaps the page. In the case when a page is not fully used (due to lack of space in rxq) the last frag that uses the page is not being set as a "last_page_user"; instead, the next frag in the rxq is incorrectly being set. The fix has also been tested on ppc64 with 64k pages... Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-21be2net: Add link test to list of ethtool self tests.Sarveshwar Bandi
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-21be2net: ethtool self test reorganization.Sarveshwar Bandi
The ddr dma ethtool self test needs to be performed even when ETH_TEST_FL_OFFLINE is not set. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_cmds.h include/linux/sysctl.h
2010-01-08be2net: implements ethtool function to read eeprom data.Sarveshwar Bandi
The patch implements a firmware command to fetch the eeprom data. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23be2net: Bug fix to return correct values in ethtool get_settings.Sarveshwar Bandi
Changes to return correct values for transceiver and supported in ethtool get_settings function. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23be2net: Bug fix to config NIC appropriately before loopback testSarveshwar Bandi
NIC controller has to be set to an appropriate mode before doing a loopback test. Test will fail otherwise. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-23be2net: Bug fix to avoid soft lockup in loopback test.Sarveshwar Bandi
This change ensures that loopback test command gives up after 4 seconds when the hardware is not responsive. This could happen if the ports are connected properly in loopback mode. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11be2net: fix error in rx completion processing.Ajit Khaparde
There are certain skews of the NIC which have multiple bits set in adapter->cap. Use & instead of == to process rx completions. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c