aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2.c
AgeCommit message (Collapse)Author
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[ETHTOOL] Provide default behaviors for a few ethtool sub-ioctlsJeff Garzik
For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10drivers/net/: all drivers/net/ cleanup with ARRAY_SIZEDenis Cheng
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20[BNX2]: Add PHY workaround for 5709 A1.Michael Chan
Add the DIS_EARLY_DAC PHY workaround for 5709 A1. Without it, link sometimes does not come up. Update version to 1.6.5. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28[BNX2]: Add write posting comment.Michael Chan
Add comment to explain why we cannot read back after chip reset before delaying. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28[BNX2]: Use msleep().Arjan van de Ven
bnx2.c (incorrectly) sets current->state directly to TASK_UNINTERRUPTIBLE, without going through set_task_state(). However all the code wants to do is an msleep so just make it do that instead... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03[BNX2]: Fix suspend/resume problem.Michael Chan
The device would not resume properly if it was shutdown before the system was suspended. In such scenario where the netif_running state is 0, bnx2_suspend() would not save the PCI state and so the memory enable bit and bus master enable bit would be lost. We fix this by always saving and restoring the PCI state in bnx2_suspend() and bnx2_resume() regardless of netif_running() state. Update version to 1.6.4. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[NET]: ethtool_perm_addr only has one implementationMatthew Wilcox
All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[BNX2]: Update version to 1.6.3.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[BNX2]: Use constants for stats ticks.Michael Chan
Change all stats related magic numbers to constants. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[BNX2]: Add delay before reading firmware version.Michael Chan
The management firmware may still be loading during bnx2_init_one() because of the D3hot -> D0 transition and the firmware version may not be available without waiting a bit. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[BNX2]: Support NVRAM on 5709.Michael Chan
The NVRAM interface is slightly modified on the 5709. To properly support it, we need to change the buffered flag in the flash data structure into multiple flags to indicate buffered operation, address translation, and the use of write enable (WREN). The 5709 flash only requires the buffered operation bit to be set. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices.Michael Chan
Add ethtool utility function to set or clear IPV6_CSUM feature flag. Modify tg3.c and bnx2.c to use this function when doing ethtool -K to change tx checksum. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-12Revert "[BNX2]: Seems to not need net/tcp.h"Linus Torvalds
This reverts commit 963bd949b12158d9b5380b718b31c4b33372ed73. The driver _does_ need the networking header files; CC [M] drivers/net/bnx2.o drivers/net/bnx2.c: In function 'bnx2_start_xmit': drivers/net/bnx2.c:5177: warning: implicit declaration of function 'tcp_optlen' drivers/net/bnx2.c:5181: error: invalid application of 'sizeof' to incomplete type 'struct ipv6hdr' drivers/net/bnx2.c:5202: error: invalid application of 'sizeof' to incomplete type 'struct tcphdr' drivers/net/bnx2.c:5207: warning: implicit declaration of function 'tcp_hdr' drivers/net/bnx2.c:5207: error: invalid type argument of '->' make[2]: *** [drivers/net/bnx2.o] Error 1 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 Cc: Ilpo Jävinen <ilpo.jarvinen@helsinki.fi> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[BNX2]: Seems to not need net/tcp.hIlpo Järvinen
Got bored to always recompile it for no reason. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Update version to 1.6.2.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Print management firmware version.Michael Chan
Add management firmware version for ethtool -i. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Enhance the heartbeat.Michael Chan
In addition to the periodic heartbeat, we're adding a heartbeat request interrupt when the heartbeat is late. This is needed during netpoll where the timer is not available. -rt kernels will also benefit since the timer is not as accurate. [ We discussed this patch last time and we decided that the -rt kernel problem alone did not justify this patch. I think the netpoll problem makes this patch necessary. ] Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Reduce spurious INTA interrupts.Michael Chan
Spurious interrupts are often encountered especially on systems using the 8259 PIC mode. This is because the I/O write to deassert the interrupt is posted and won't get to the chip immediately. As a result, the IRQ may remain asserted after the IRQ handler exits, causing spurious interrupts. Add read back to flush the I/O write to deassert the IRQ immediately. We also store the last_status_idx immediately in the IRQ handler to help detect whether the interrupt is ours or not when the IRQ is entered again before ->poll gets called. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Modify link up message.Michael Chan
Modify the link up dmesg to report remote copper or Serdes link. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Add ethtool support for remote PHY.Michael Chan
Modify the driver's ethtool_ops->get_settings and set_settings functions to support remote PHY. Users control the remote copper PHY settings by specifying link settings for the tp (twisted pair) port. The nway_reset function is also modified to support remote PHY. mii-tool operations are not supported on remote PHY and we will return -EOPNOTSUPP. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Add support for remote PHY.Michael Chan
In blade servers, the Serdes PHY in 5708S can control the remote copper PHY through autonegotiation on the backplane. This patch adds the logic to interface with the firmware to control the remote PHY autonegotiation and to handle remote PHY link events. When remote PHY is present, the 5708S Serdes device practically becomes a copper device with full control over the 1000Base-T link settings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Add bnx2_set_default_link().Michael Chan
Put existing code to setup the default link settings in this new function. This makes it easier to support the remote PHY feature in the next few patches. Also change ETHTOOL_ALL_FIBRE_SPEED to include 2500Mbps if supported. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[NET]: IPV6 checksum offloading in network devicesStephen Hemminger
The existing model for checksum offload does not correctly handle devices that can offload IPV4 and IPV6 only. The NETIF_F_HW_CSUM flag implies device can do any arbitrary protocol. This patch: * adds NETIF_F_IPV6_CSUM for those devices * fixes bnx2 and tg3 devices that need it * add NETIF_F_IPV6_CSUM to ipv6 output (incl GSO) * fixes assumptions about NETIF_F_ALL_CSUM in nat * adjusts bridge union of checksumming computation Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Update version and reldate.Michael Chan
Update to version 1.5.11. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Fix occasional counter corruption on 5708.Michael Chan
The statistics block DMA on 5708 can be messed up occasionally on the average of about once per hour. If the user is reading the counters within one second after the corruption, the counters will be all messed up. One second later, the counters will be ok again until the next corruption occurs. The workaround is to disable the periodic statistics DMA. Instead, we manually trigger the DMA once a second in bnx2_timer(). This manual trigger of the DMA avoids the problem. As a consequence, we can only allow 0 or 1 second settings for ethtool -C statistics block. Thanks to Jean-Daniel Pauget <jd@disjunkt.com> and CaT <cat@zip.com.au> for reporting this rare problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Enable DMA on 5709.Michael Chan
Add missing code to enable DMA on 5709 A1. The bit is a no-op on A0 and therefore can be set on all 5709 chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Add missing wait in bnx2_init_5709_context().Michael Chan
For correctness, we need to wait for the MEM_INIT bit to be cleared in the BNX2_CTX_COMMAND register before proceeding. [Added return -EBUSY when the MEM_INIT bit doesn't clear, suggested by Jeff Garzik.] Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Fix netdev watchdog on 5708.Michael Chan
There's a bug in the driver that only initializes half of the context memory on the 5708. Surprisingly, this works most of the time except for some occasional netdev watchdogs when sending a lot of 64-byte packets. The fix is to add the missing code to initialize the 2nd halves of all context memory. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03network drivers: eliminate unneeded kill_vid codeStephen Hemminger
Many drivers had code that did kill_vid, but they weren't doing vlan filtering. With new API the stub is unneeded unless device sets NETIF_F_HW_VLAN_FILTER. Bad habit: I couldn't resist fixing a couple of nearby style things in acenic, and forcedeth. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-03[BNX2]: Fix TSO problem with small MSS.Michael Chan
Remove the check for skb->len greater than MTU when doing TSO. When the destination has a smaller MSS than the source, a TSO packet may be smaller than the MTU at the source and we still need to process it as a TSO packet. Thanks to Brian Ristuccia <bristuccia@starentnetworks.com> for reporting the problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Update version and reldate.Michael Chan
Update version to 1.5.10. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Print bus information for PCIE devices.Michael Chan
Fix the code to print PCI or PCIE bus information for all devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add 1-shot MSI handler for 5709.Michael Chan
The 5709 supports the one-shot MSI handler similar to some of the tg3 chips. In this mode, the MSI disables itself automatically until it is re-enabled at the end of NAPI poll. Put the request_irq/free_irq logic in common procedures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Restructure PHY event handling.Michael Chan
Restructure by adding bnx2_phy_event_is_set() to make code cleaner and easier to understand. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add indirect spinlock.Michael Chan
The indirect register access method will be used by more than one caller in BH context (NAPI poll and timer), so a spinlock is required. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add support for 5709 Serdes.Michael Chan
Add PCI ID and code to support the 5709 Serdes PHY. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Re-structure the 2.5G Serdes code.Michael Chan
Add some common procedures to handle enabling and disabling 2.5G. Add some missing code to resolve flow control. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Put MII register offsets in the bnx2 struct.Michael Chan
The 5709 Serdes device uses non-standard MII register offsets. This re-structuring will make it easier to support 5709 Serdes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add ipv6 TSO and checksum for 5709.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Save PCI state during suspend.Michael Chan
This is needed to save the MSI state which will be lost during suspend. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Fix race conditions when calling register_netdev().Michael Chan
Hot-plug scripts can call bnx2_open() as soon as register_netdev() is called in bnx2_init_one(). We need to call pci_set_drvdata() and setup everything before calling register_netdev(). netif_carrier_off() also needs to be moved to bnx2_open() to avoid race conditions with the irq. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add 40-bit DMA workaround for 5708.Michael Chan
The internal PCIE-to-PCIX bridge of the 5708 has the same 40-bit DMA limitation as some of the tg3 chips. Set dma_mask and persistent DMA mask to 40-bit to workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Fix register and memory test on 5709.Michael Chan
Tweak registers and memory test range for 5709. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Block MII access when ifdown.Michael Chan
The device may be in D3hot state and should not allow MII register access. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>