aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2.h
AgeCommit message (Collapse)Author
2006-01-23[BNX2]: Update version and copyright yearMichael Chan
Update version to 1.4.31 and add 2006 copyright. Skip the last digit when reporting the firmware version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Fix nvram sizingMichael Chan
Add code to correctly determine nvram size. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Fix UDP checksum verificationMichael Chan
Fix TCP/UDP checksum verification. Use status bits in the buffer descriptor instead of the checksum value to verify rx checksum. Using the checksum value will be incorrect if the UDP packet has zero in the UDP checksum field. Firmware update required for this fix. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Misc. fixesMichael Chan
Some misc. fixes for WoL, 5708 B1, and a typo '=' instead of '=='. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Improve handshake with firmwareMichael Chan
Improve handshake with bootcode with the following changes: 1. Increase timeout to 100msec and use msleep instead of udelay. 2. Add more error checking for timeouts and errors. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-23[BNX2]: Fix VLAN on ASFMichael Chan
Always set up the device to strip incoming VLAN tags when ASF is enabled. ASF firmware will not parse packets correctly if VLAN tags are not stripped. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-05[PATCH] bnx2: refine bnx2_pollMichael Chan
Refine bnx2_poll() logic to write back the most up-to-date status tag when all work has been processed. This eliminates some occasional extra interrupts when a older status tag is written even though all work has been processed. The idea is to read the status tag just before exiting bnx2_poll() and then check again for any new work. If no new work is pending, the status tag written back will not generate any extra interrupt. This logic is similar to the changes David Miller did to tg3_poll(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] bnx2: update firmware handshake for 5708Michael Chan
Dynamically determine the shared memory location where eeprom parameters are stored instead of using a fixed location. Add speed reporting to management firmware. This allows management firmware to know the current speed without contending for MII registers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] bnx2: update nvram code for 5708Michael Chan
Update bnx2 nvram code with support for 5708. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] bnx2: add 5708 supportMichael Chan
Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-09-08[BNX2]: Fix bug in irq handler and add prefetchMichael Chan
Fix bug in bnx2_interrupt() that caused an unnecessary register read. The BNX2_PCICFG_MISC_STATUS should only be read when the status tag has not changed. Add prefetch of the status block in bnx2_msi() similar to tg3_msi(). The status block is not touched in bnx2_msi() and prefetching it will speed up bnx2_poll() that will run on the same CPU that received the MSI. Update version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[BNX2]: remove atomics in txMichael Chan
Remove atomic operations in the fast tx path. Expensive atomic operations were used to keep track of the number of available tx descriptors. The new code uses the difference between the consumer and producer index to determine the number of free tx descriptors. As suggested by Jeff Garzik, the name of the inline function is changed to all lower case. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[BNX2]: speedup serdes linkupMichael Chan
This speeds up link-up time on 5706 SerDes if the link partner does not autoneg, a rather common scenario in blade servers. Some blade servers use IPMI for keyboard input and it's important to minimize link disruptions. The speedup is achieved by shortening the timer to (HZ / 3) during the transient period right after initiating a SerDes autoneg. If autoneg does not complete, parallel detect can be done sooner. After the transient period is over, the timer goes back to its normal HZ interval. As suggested by Jeff Garzik, the timer initialization is moved to bnx2_init_board() from bnx2_open(). An eeprom bit is also added to allow default forced SerDes speed for even faster link-up time. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[BNX2]: Fix rtnl deadlock in bnx2_closeMichael Chan
This fixes an rtnl deadlock problem when flush_scheduled_work() is called from bnx2_close(). In rare cases, linkwatch_event() may be on the workqueue from a previous close of a different device and it will try to get the rtnl lock which is already held by dev_close(). The fix is to set a flag if we are in the reset task which is run from the workqueue. bnx2_close() will loop until the flag is cleared. As suggested by Jeff Garzik, the loop is changed to call msleep(1) instead of yield() in the original patch. flush_scheduled_work() is also moved to bnx2_remove_one() before the netdev is freed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-26[BNX2]: New Broadcom gigabit network driver.Michael Chan
A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>