aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bonding
AgeCommit message (Collapse)Author
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-01net: Simplify the bond drivers pernet operations.Eric W. Biederman
Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/sfe4001.c drivers/net/wireless/libertas/cmd.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/rtl8187se/Kconfig drivers/staging/rtl8192e/Kconfig
2009-11-18netns: net_identifiers should be read_mostlyEric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15bonding: fix 802.3ad standards compliance errorJay Vosburgh
The language of 802.3ad 43.4.9 requires the "recordPDU" function to, in part, compare the Partner parameter values in a received LACPDU to the stored Actor values. If those match, then the Partner's synchronization state is set to true. The current 802.3ad implementation is performing these steps out of order; first, the synchronization check is done, then the paramters are checked to see if they match (the synch check being done against a match check of a prior LACPDU). This causes delays in establishing aggregators in some circumstances. This patch modifies the 802.3ad code to call __choose_matched, the function that does the "match" comparisions, as the first step of __record_pdu, instead of immediately afterwards. This new behavior is in compliance with the language of the standard. Some additional commentary relating to code vs. standard is also added. Reported by Martin Patterson <martin@gear6.com> who also supplied the logic of the fix and verified the patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30bond: Get the rtnl_link_ops support correctEric W. Biederman
- Don't call rtnl_link_unregister if rtnl_link_register fails - Set .priv_size so we aren't stomping on uninitialized memory when we use netdev_priv, on bond devices created with ip link add type bond. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30bond: Add support for multiple network namespacesEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30bond: Implement a basic set of rtnl link opsEric W. Biederman
This implements a basic set of rtnl link ops and takes advantage of the fact that rtnl_link_unregister kills all of the surviving devices to all us to kill bond_free_all. A module alias is added so ip link add can pull in the bonding module. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30bond: Simplify bond device destructionEric W. Biederman
Manually inline the code from bond_deinit to bond_uninit. bond_uninit is the only caller and it is short. Move the call of bond_release_all from the netdev notifier into bond_uninit. The call site is effectively the same and performing the call explicitly allows all the paths for destroying a bonding device to behave the same way. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30bond: Simplify bond_create.Eric W. Biederman
Stop calling dev_get_by_name to see if the bond device already exists. register_netdevice already does that. Stop calling bond_deinit if register_netdevice fails as bond_uninit is guaranteed to be called if bond_init succeeds. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30bond: Simply bond sysfs group creationEric W. Biederman
This patch delegates the work of creating the sysfs groups to the netdev layer and ultimately to the device layer. This closes races between uevents. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits) net: Fix 'Re: PACKET_TX_RING: packet size is too long' netdev: usb: dm9601.c can drive a device not supported yet, add support for it qlge: Fix firmware mailbox command timeout. qlge: Fix EEH handling. AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2) bonding: fix a race condition in calls to slave MII ioctls virtio-net: fix data corruption with OOM sfc: Set ip_summed correctly for page buffers passed to GRO cnic: Fix L2CTX_STATUSB_NUM offset in context memory. MAINTAINERS: rt2x00 list is moderated airo: Reorder tests, check bounds before element mac80211: fix for incorrect sequence number on hostapd injected frames libertas spi: fix sparse errors mac80211: trivial: fix spelling in mesh_hwmp cfg80211: sme: deauthenticate on assoc failure mac80211: keep auth state when assoc fails mac80211: fix ibss joining b43: add 'struct b43_wl' missing declaration b43: Fix Bugzilla #14181 and the bug from the previous 'fix' rt2x00: Fix crypto in TX frame for rt2800usb ...
2009-10-28bonding: fix a race condition in calls to slave MII ioctlsJiri Bohac
In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27bonding: Remove bond_dev from xmit_hash_policy call.Jasper Spaans
Now that the bonding device is no longer used in determining the device to which to send packets, it can be dropped from the argument list of the various xmit_hash_policy calls. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
2009-10-24bonding: Modify hash transmit policies to use the packet's source MAC addressJasper Spaans
Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13bonding: change bond_create_proc_entry() to return voidNicolas de Pesloüan
The function bond_create_proc_entry is currently of type int. Two versions of this function exist: The one in the ifdef CONFIG_PROC_FS branch always return 0. The one in the else branch (which is empty) return nothing. When CONFIG_PROC_FS is undef, this cause the following warning: drivers/net/bonding/bond_main.c: In function `bond_create_proc_entry': drivers/net/bonding/bond_main.c:3393: warning: control reaches end of non-void function No caller of this function use the returned value. So change the returned type from int to void and remove the useless return 0; . Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Reported-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-07bonding: remove useless assignmentNicolas de Pesloüan
The variable old_active is first set to bond->curr_active_slave. Then, it is unconditionally set to new_active, without being used in between. The first assignment, having no side effect, is useless. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: fix a parameter name in error messageNicolas de Pesloüan
When parsing module parameters, bond_check_params() erroneously use 'xor_mode' as the name of a module parameter in an error message. The right name for this parameter is 'xmit_hash_policy'. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: introduce primary_reselect optionJiri Pirko
In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01bonding: set primary param via sysfsJiri Pirko
Primary module parameter passed to bonding is pernament. That means if you release the primary slave and enslave it again, it becomes the primary slave again. But if you set primary slave via sysfs, the primary slave is only set once and it's not remembered in bond->params structure. Therefore the setting is lost after releasing the primary slave. This simple one-liner fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21trivial: fix typo "to to" in multiple filesAnand Gadiyar
Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-16bonding: make ab_arp select active slaves as other modesJiri Pirko
When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15bonding: remap muticast addresses without using dev_close() and dev_open()Moni Shoua
This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01bonding: use compare_ether_addr_64bits() in ALBEric Dumazet
We can speedup ether addresses compares using compare_ether_addr_64bits() instead of memcmp(). We make sure all operands are at least 8 bytes long and 16bits aligned (or better, long word aligned if possible) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo drivers to netdev_tx_tStephen Hemminger
These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28bonding: Have bond_check_dev_link examine netif_runningPetri Gynther
bonding: Have bond_check_dev_link examine netif_running Some network devices do not call netif_carrier_off when they are set administratively down. Have the bonding link check function also inspect the netif_running state. Ignore netif_running if the bond_check_dev_link function is called with "reporting" set, as in that case it's inspecting the capabilities of the non-netif_carrier device driver. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28bonding: Fix useless test: int > INT_MAXNicolas de Pesloüan
max_bonds is of type int and cannot be greater than INT_MAX. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28bonding: use compare_ether_addrStephen Hemminger
Bonding can use compare_ether_addr() in bond_release. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28bonding: propogate vlan_features to bonding masterJay Vosburgh
Propogate the vlan_features of the slave devices to the bonding master device, using the same logic as for regular features. Tested by Or Gerlitz <ogerlitz@voltaire.com>, who also removed the debug logic from the original test patch. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13bonding: wipe out printk'sJiri Pirko
I did not introduce new lines over 80 chars. I even eliminated some of them. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/orinoco/main.c
2009-07-16bonding: clean muticast addresses when device changes typeMoni Shoua
Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12drivers/net/bonding: Adjust constant nameJulia Lawall
AD_SHORT_TIMEOUT and AD_STATE_LACP_ACTIVITY have the same value, but AD_STATE_LACP_ACTIVITY better reflects the intended semantics. [ J adds: AD_STATE_LACP_ACTIVITY is a value defined by the standard, and should be set here in accordance with 802.3ad 43.4.12; AD_SHORT_TIMEOUT is a constant specific to the Linux 802.3ad implementation that happens to have the same value ] The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct port_params p; @@ * p.port_state |= AD_SHORT_TIMEOUT // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: convert remaining non-symbolic return values in ndo_start_xmit() functionsPatrick McHardy
This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: initialization reworkStephen Hemminger
Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: use is_zero_ether_addrStephen Hemminger
Remove bogus non-portable possibly unaligned way of testing for zero addres.. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: network device names are case sensativeStephen Hemminger
The bonding device acts unlike all other Linux network device functions in that it ignores case of device names. The developer must have come from windows! Cleanup the management of names and use standard routines where possible. Flag places where bonding device still doesn't work right with network namespaces. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: elminate bad refcount codeStephen Hemminger
The "expected_refcount" stuff in bonding sysfs module is a mistake. Sysfs does proper refcounting, and it is okay to remove a bond device that has some user process holding the file open. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: fix style issuesStephen Hemminger
Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: fix destructorStephen Hemminger
It is not safe to use a network device destructor that is a function in the module, since it can be called after module is unloaded if sysfs handle is open. When eventually using netlink, the device cleanup code needs to be done via uninit function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: remove bonding read/write semaphoreStephen Hemminger
The whole read/write semaphore locking can be removed. It doesn't add any protection that isn't already done by using the RTNL mutex properly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: initialize before registrationStephen Hemminger
Avoid a unnecessary carrier state transistion that happens when device is registered. Lockdep works better if initialization is done before registration as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13bonding: bond_create always called with default parametersStephen Hemminger
bond_create() is always called with same parameters so move the argument down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11bonding: fix multiple module load problemStephen Hemminger
Some users still load bond module multiple times to create bonding devices. This accidentally was broken by a later patch about the time sysfs was fixed. According to Jay, it was broken by: commit b8a9787eddb0e4665f31dd1d64584732b2b5d051 Author: Jay Vosburgh <fubar@us.ibm.com> Date: Fri Jun 13 18:12:04 2008 -0700 bonding: Allow setting max_bonds to zero Note: sysfs and procfs still produce WARN() messages when this is done so the sysfs method is the recommended API. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29bonding: use bond_is_lb() when it's appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18net: release dst entry in dev_hard_start_xmit()Eric Dumazet
One point of contention in high network loads is the dst_release() performed when a transmited skb is freed. This is because NIC tx completion calls dev_kree_skb() long after original call to dev_queue_xmit(skb). CPU cache is cold and the atomic op in dst_release() stalls. On SMP, this is quite visible if one CPU is 100% handling softirqs for a network device, since dst_clone() is done by other cpus, involving cache line ping pongs. It seems right place to release dst is in dev_hard_start_xmit(), for most devices but ones that are virtual, and some exceptions. David Miller suggested to define a new device flag, set in alloc_netdev_mq() (so that most devices set it at init time), and carefuly unset in devices which dont want a NULL skb->dst in their ndo_start_xmit(). List of devices that must clear this flag is : - loopback device, because it calls netif_rx() and quoting Patrick : "ip_route_input() doesn't accept loopback addresses, so loopback packets already need to have a dst_entry attached." - appletalk/ipddp.c : needs skb->dst in its xmit function - And all devices that call again dev_queue_xmit() from their xmit function (as some classifiers need skb->dst) : bonding, vlan, macvlan, eql, ifb, hdlc_fr Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18net: FIX bonding sysfs rtnl_lock deadlockEric W. Biederman
Sysfs files for a network device can not unconditionally take the rtnl_lock as the bonding sysfs files do. If someone accesses those sysfs files while the network device is being unregistered with the rtnl_lock held we will deadlock. So use trylock and restart_syscall to avoid this problem. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 01:55:14 +0000