aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bonding
AgeCommit message (Collapse)Author
2006-12-04[PATCH] bonding: incorrect bonding state reported via ioctlAndy Gospodarek
This is a small fix-up to finish out the work done by Jay Vosburgh to add carrier-state support for bonding devices. The output in /proc/net/bonding/bondX was correct, but when collecting the same info via an iotcl it could still be incorrect. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30[PATCH] bonding: fix an oops when slave device does not provide get_statsLaurent Riffard
Bonding driver unconditionnaly dereference get_stats function pointer for each of its slave device. This patch - adds a check for NULL dev->get_stats pointer in bond_get_stats - prints a notice when the bonding device enslave a device without get_stats function. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10[PATCH] bonding: lockdep annotationPeter Zijlstra
============================================= [ INFO: possible recursive locking detected ] 2.6.17-1.2600.fc6 #1 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05[PATCH] bonding: fix deadlock on high loads in bond_alb_monitor()Karsten Keil
In bond_alb_monitor the bond->curr_slave_lock write lock is taken and then dev_set_promiscuity maybe called which can take some time, depending on the network HW. If a network IRQ for this card come in the softirq handler maybe try to deliver more packets which end up in a request to the read lock of bond->curr_slave_lock -> deadlock. This issue was found by a test lab during network stress tests, this patch disable the softirq handler for this case and solved the issue. Signed-off-by: Karsten Keil <kkeil@suse.de> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28[IPV4]: annotate struct in_ifaddrAl Viro
ifa_local, ifa_address, ifa_mask, ifa_broadcast and ifa_anycast are net-endian. Annotated them and variables that are inferred to be net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-27[PATCH] bonding: update version numberJay Vosburgh
I neglected to properly update the version number in the recent patch series; this sets it to something reasonable. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Fix primary selection error at enslavement timeJay Vosburgh
At enslavement time, the primary slave might not be activated if there is already an active slave and the new slave is the primary. Replaced complicated logic with a call to bond_select_active_slave(), which does the right thing. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6378 Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Don't mangle LACPDUsJay Vosburgh
Fixed handling of 802.3ad LACPDUs. Do not byte swap data in place in the packet. Updated nomenclature of "__ntohs_lacpdu" to be "htons"; it was previously used for both ntohs and htons operations, but only called ntohs functions. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Validate probe replies in ARP monitorJay Vosburgh
Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Don't release slaves when master is admin downjamal
When a bonding netdevice is admin-ed down it loses the slaves attributes (set via ifenslave). This is not consistent with other behavior of netdevices (example a qdisc attached to a netdevice doesnt disappear or an attached IP address etc). The included patch fixes this. Ive tested by ifenslaving, downing the bond, checking /proc and making sure it still has the slaves, up-ing the bond and making sure things continue to work. Jay/Bonding folks if you are ok with it, just ACK it or include it in your tree etc. Otherwise we can discuss. Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Add priv_flag to avoid event mishandlingJay Vosburgh
Add priv_flag to specifically identify bonding-involved devices. Needed because IFF_MASTER is an unreliable identifier (vlan interfaces above bonding will inherit IFF_MASTER). Misidentification of devices would cause notifier events for other devices to be erroneously processed by bonding, causing various havoc. Bug discovered by Martin Papik <martin.papik@ipsec.info>; this patch is modified from his original. Signed-off-by: Martin Papik <martin.papik@ipsec.info> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Handle large hard_header_lenJay Vosburgh
The bonding driver fails to adjust its hard_header_len when enslaving interfaces. Whenever an interface with a hard_header_len greater than the ETH_HLEN default is enslaved, the potential for an oops exists, and if the oops happens while responding to an arp request, for example, the system panics. GIANFAR devices may use an extended hard_header for VLAN or hardware checksumming. Enslaving such a device and then transmitting over it causes a kernel panic. Patch modified from submitter's original, but submitter agreed with this patch in private email. Signed-off-by: Mark Huth <mhuth@mvista.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Remove unneeded NULL testJay Vosburgh
Remove unneeded test for NULL. Reported by Thomas Dillig <tdillig@stanford.edu> and Isil Dillig <isil@stanford.edu> via Stephen Hemminger <shemminger@osdl.org>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Format fix in seq_printf callKenzo Iwami
Though link_failure_count is type unsigned int, this value is outputted to /proc/net/bonding/bondX file using "%d" instead of "%u". The attached patch fixes this problem. Signed-off-by: Kenzo Iwami <k-iwami@cj.jp.nec.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Convert delay value from s16 to intJay Vosburgh
The value of "downdelay/miimon" and "updelay/miimon" are stored in slave->delay. The type of downdelay, updelay, and miimon are all int. However, slave->delay is type short, and it is not possible to store the value of "downdelay/miimon" or "updelay/miimon" in some cases. (For example, miimon=1 downdelay=32768) The attached patch fixes this problem. Signed-off-by: Kenzo Iwami <k-iwami@cj.jp.nec.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] bonding: Allow bonding to enslave a 10 Gig adapterJay Vosburgh
Allow channel bonding to enslave a 10 Gig adapter without errors. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-17[NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUMHerbert Xu
The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM identically so we test for them in quite a few places. For the sake of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We also test the disjunct of NETIF_F_IP_CSUM and the other two in various places, for that purpose I've added NETIF_F_ALL_CSUM. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET]: Add netif_tx_lockHerbert Xu
Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29[PATCH] bonding: support carrier state for masterJay Vosburgh
Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27[PATCH] Notifier chain update: API changesAlan Stern
The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-03Merge branch 'net-const'Jeff Garzik
2006-03-03Massive net driver const-ification.Arjan van de Ven
2006-03-03[PATCH] bonding: suppress duplicate packetsJay Vosburgh
Originally submitted by Kenzo Iwami; his original description is: The current bonding driver receives duplicate packets when broadcast/ multicast packets are sent by other devices or packets are flooded by the switch. In this patch, new flags are added in priv_flags of net_device structure to let the bonding driver discard duplicate packets in dev.c:skb_bond(). Modified by Jay Vosburgh to change a define name, update some comments, rearrange the new skb_bond() for clarity, clear all bonding priv_flags on slave release, and update the driver version. Signed-off-by: Kenzo Iwami <k-iwami@cj.jp.nec.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-17[PATCH] bonding: fix a locking bug in bond_releaseJay Vosburgh
bond_release returns EINVAL without releasing the bond lock if the slave device is not being bonded by the bond. The following patch ensures that the lock is released in this case. Signed-off-by: Stephen J. Bevan <stephen@dino.dnsalias.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] bonding: Sparse warnings fixLuiz Fernando Capitulino
drivers/net/bonding/bond_sysfs.c:263:27: warning: Using plain integer as NULL pointer drivers/net/bonding/bond_sysfs.c:998:26: warning: Using plain integer as NULL pointer drivers/net/bonding/bond_sysfs.c:1126:26: warning: Using plain integer as NULL pointer Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] bonding: allow bond to use TSO if slaves support itJay Vosburgh
Add NETIF_F_TSO (NETIF_F_UFO) to BOND_INTERSECT_FEATURES so that it can be used by a bonding device iff all its slave devices support TSO (UFO). Signed-off-by: Arthur Kepner <akepner@sgi.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] bonding: fix ->get_settings error checkingEric Sesterhenn
Since get_settings() returns a signed int and it gets checked for < 0 to catch an error, res should be a signed int too. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-12[PATCH] bonding: UPDATED hash-table corruption in bond_alb.cJay Vosburgh
I believe I see the race Michael refers to (tlb_choose_channel may set head, which tlb_init_slave clears), although I was not able to reproduce it. I have updated his patch for the current netdev-2.6.git tree and added a version update. His original comment follows: Our systems have been crashing during testing of PCI HotPlug support in the various networking components. We've faulted in the bonding driver due to a bug in bond_alb.c:tlb_clear_slave() In that routine, the last modification to the TLB hash table is made without protection of the lock, allowing a race that can lead tlb_choose_channel() to select an invalid table element. -J Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09[PATCH] drivers/net/bonding/bonding.h: "extern inline" -> "static inline"Adrian Bunk
"extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-28[bonding] Remove superfluous changelog.Jeff Garzik
No need to record this information in source code, its all in the git repository, and kernel archives.
2005-11-13[PATCH] bonding: comments and changelogMitch Williams
Bonding source files still have changelogs in the comments. This, then, is an update to that changelog. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: spelling and whitespace correctionsMitch Williams
Minor spelling and whitespace corrections. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: version updateMitch Williams
Update the version number for the bonding module. Since we've just added a significant new feature (sysfs support), bump the major number. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: add sysfs functionality to bonding (large)Mitch Williams
This large patch adds sysfs functionality to the channel bonding module. Bonds can be added, removed, and reconfigured at runtime without having to reload the module. Multiple bonds with different configurations are easily configured, and ifenslave is no longer required to configure bonds. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: add ARP entries to /procMitch Williams
Make the /proc files show which ARP targets are in use by each bond. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: Allow ARP target table to have empty entriesMitch Williams
With the sysfs interface, the user can remove entries from the ARP table at runtime. The ARP monitor code now allows for empty entries in the table. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: make bond_init not __initMitch Williams
The sysfs interface can create bonds at runtime, and __init code goes away after module init. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: move bond creation into separate functionMitch Williams
The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: make functions not staticMitch Williams
The sysfs code needs access these functions, so make them not static, and move the protos to the header file. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: expose some structsMitch Williams
The sysfs code needs to know what these structs look like, so make them not static, and move the definition to the header. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: explicitly clear RLB flag during ALB initMitch Williams
Explicitly clear RLB flag during ALB init. This is needed for sysfs support, since the bond mode can be changed at runtime via sysfs. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: move kmalloc out of spinlock in ALB initMitch Williams
Move memory allocations out of the spinlock during ALB init. This gets rid of a sleeping-inside-spinlock warning and accompanying stack dump. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: get slave name from actual slave instead of param listMitch Williams
Take the primary slave name shown in /proc from the actual slave dev instead of from the command-line parameter, which won't be present if the bond is created via sysfs. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: Add transmit policy to /procMitch Williams
Adds information about the recently-added transmit policy setting to each bond's /proc file. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: expand module param descriptionsMitch Williams
Expand and correct the parameter descriptions shown by modinfo. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: add bond name to all error messagesMitch Williams
Add the bond name to all error messages so we can tell which one is complaining. Also reformats some error messages to be more consistent. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-07[PATCH] bonding: fix feature consolidationJay Vosburgh
This should resolve http://bugzilla.kernel.org/show_bug.cgi?id=5519 The current feature computation loses bits that it doesn't know about, resulting in an inability to add VLANs and possibly other havoc. Rewrote function to preserve bits it doesn't know about, remove an unneeded state variable, and simplify the code. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-10-18[PATCH] bonding: cleanup comment for mode 1 IGMP xmit hackJohn W. Linville
Expand comment explaining MAC address selection for replicated IGMP frames transmitted in bonding mode 1 (active-backup). Also, a small whitespace cleanup. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>