aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/can
AgeCommit message (Collapse)Author
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/can: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18can: fix setting mcp251x bit timing on openChristian Pellegrin
Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: improve buildWolfram Sang
- move Kconfig entries to the subdirectory - do remaining renames of mpc52xx to mpc5xxx Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: add error path to mscan_open()Wolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: replace hardcoded values with definesWolfram Sang
Not all hardcoded values have been replaced as this made the code quite unreadable. IMHO this compromise serves the purpose of readability. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mpc52xx_can: improve properties and their descriptionWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: devicetree-discuss@ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mpc52xx_can: refactor clock-get routineWolfram Sang
Merge two functions into one. The result is smaller as they can now share some variables. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: drop assignment in while-constructWolfram Sang
As suggested by Wolfgang Grandegger. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: fix function annotationsWolfram Sang
- use extern where apropriate - don't export symbols Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: use {clr|set}bits8 macrosWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: drop support for CAN_MODE_{SLEEP|STOP}Wolfram Sang
The upper layer does not support it yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: trivial fixesWolfram Sang
- remove whitespaces - use ! and ?: when apropriate - make braces consistent Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: move defines into .h fileWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/Kconfig
2009-11-13net/can: add driver for mscan family & mpc52xx_mscanWolfram Sang
Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a phyCORE-MPC5200B-IO and a custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13can: add the missing netlink get_xstats_size callbackWolfgang Grandegger
This patch adds the missing "get_xstats_size" callback for the netlink interface, which is required if "fill_xstats" is used, as pointed out by Patrick McHardy. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13can: Fix driver Kconfig structureOliver Hartkopp
In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig entry right behind an entry of the same *vendor*. This teared the SJA1000 based driver selection into pieces. This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves the SJA1000 and USB Kconfig portions into the belonging directories. As there are many new CAN drivers in the queue getting this cleanup into 2.6.32-rc would massively reduce the problems for the upcoming drivers. Thanks, Oliver Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/usb/ems_usb.c
2009-11-08can: Driver for the Microchip MCP251x SPI CAN controllersChristian Pellegrin
Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08net: Support specifying the network namespace upon device creation.Eric W. Biederman
There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2009-11-08can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo()Wolfgang Grandegger
On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo() is thrown when the CAN device is registered due to insufficient skb space, as reported by various users. This patch adds the rtnl_link_ops "get_size" to fix the problem. I think this patch is required for more recent kernels as well, even if no WARN_ON dumps are triggered. Maybe we also need "get_xstats_size" for the CAN xstats. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ems_usb: Fix byte order issues on big endian machinesSebastian Haas
CPC-USB is using a ARM7 core with little endian byte order. The "id" field in can_msg needs byte order conversion from/to CPU byte order. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sh_eth.c
2009-10-27can: sja1000: fix bug using library functions for skb allocationKurt Van Dijck
Commit 7b6856a0 "can: provide library functions for skb allocation" did not properly remove two lines of the SJA1000 driver resulting in a 'skb_over_panic' when calling skb_put, as reported by Kurt. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-20can: provide library functions for skb allocationWolfgang Grandegger
This patch makes the private functions alloc_can_skb() and alloc_can_err_skb() of the at91_can driver public and adapts all drivers to use these. While making the patch I realized, that the skb's are *not* setup consistently. It's now done as shown below: skb->protocol = htons(ETH_P_CAN); skb->pkt_type = PACKET_BROADCAST; skb->ip_summed = CHECKSUM_UNNECESSARY; *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); memset(*cf, 0, sizeof(struct can_frame)); The frame is zeroed out to avoid uninitialized data to be passed to user space. Some drivers or library code did not set "pkt_type" or "ip_summed". Also, "__constant_htons()" should not be used for runtime invocations, as pointed out by David Miller. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net: Fix OF platform drivers coldplug/hotplug when compiled as modulesAnton Vorontsov
Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13can: make the number of echo skb's configurableWolfgang Grandegger
This patch allows the CAN controller driver to define the number of echo skb's used for the local loopback (echo), as suggested by Kurt Van Dijck, with the function: struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); The CAN drivers have been adapted accordingly. For the ems_usb driver, as suggested by Sebastian Haas, the number of echo skb's has been increased to 10, which improves the transmission performance a lot. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07can: add TI CAN (HECC) driverAnant Gole
TI HECC (High End CAN Controller) module is found on many TI devices. It has 32 hardware mailboxes with full implementation of CAN protocol 2.0B with bus speeds up to 1Mbps. Specifications of the module are available on TI web <http://www.ti.com> Signed-off-by: Anant Gole <anantgole@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25at91_can: Forgotten git 'add' of at91_can.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2Sebastian Haas
The driver mapped only 128 bytes of the CAN controller address space when a CPC-PCI v2 was detected (incl. CPC-104P). This patch will fix it by always mapping the whole address space (4096 bytes on all boards) of the corresponding PCI BAR. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22at91_can: add driver for Atmel's CAN controller on AT91SAM9263Marc Kleine-Budde
This patch add the driver for the SoC CAN controller in Atmel's AT91SAM9263. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interfaceSebastian Haas
This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15can: fix NOHZ local_softirq_pending 08 warningOliver Hartkopp
When using nanosleep() in an userspace application we get a ratelimit warning NOHZ: local_softirq_pending 08 for 10 times. The echo of CAN frames is done from process context and softirq context only. Therefore the usage of netif_rx() was wrong (for years). This patch replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. It also adds a missing comment that can_send() must no be used from hardirq context. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Urs Thuermann <urs@isnogud.escape.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-04can: sja1000: legacy SJA1000 ISA bus driverWolfgang Grandegger
This patch adds support for legacy SJA1000 CAN controllers on the ISA or PC-104 bus. The I/O port or memory address and the IRQ number must be specified via module parameters: insmod sja1000_isa.ko port=0x310,0x380 irq=7,11 for ISA devices using I/O ports or: insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 for memory mapped ISA devices. Indirect access via address and data port is supported as well: insmod sja1000_isa.ko port=0x310,0x380 indirect=1 irq=7,11 Here is a full list of the supported module parameters: port:I/O port number (array of ulong) mem:I/O memory address (array of ulong) indirect:Indirect access via address and data port (array of byte) irq:IRQ number (array of int) clk:External oscillator clock frequency (default=16000000 [16 MHz]) (array of int) cdr:Clock divider register (default=0x48 [CDR_CBP | CDR_CLK_OFF]) (array of byte) ocr:Output clock register (default=0x18 [OCR_TX0_PUSHPULL]) (array of byte) Note: for clk, cdr, ocr, the first argument re-defines the default for all other devices, e.g.: insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 is equivalent to insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 \ clk=24000000,24000000 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-04can: sja1000: fix network statistics updateWolfgang Grandegger
The member "tx_bytes" of "struct net_device_stats" should be incremented when the interrupt is done and an "arbitration lost error" is a TX error and the statistics should be updated accordingly. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-04can: add can_free_echo_skb() for upcoming driversWolfgang Grandegger
This patch adds the function can_free_echo_skb to the CAN device interface to allow upcoming drivers to release echo skb's in case of error. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02drivers: Kill now superfluous ->last_rx storesEric Dumazet
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo drivers to netdev_tx_tStephen Hemminger
These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/netxen/netxen_nic_main.c
2009-08-13can: fix oops caused by wrong rtnl newlink usageOliver Hartkopp
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created with the ip tool ... The invocation of 'ip link add type can' lead to an oops as the standard rtnl newlink function was called: http://bugzilla.kernel.org/show_bug.cgi?id=13954 This patch adds a private newlink function for the CAN device driver interface that unconditionally returns -EOPNOTSUPP. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Patrick McHardy <kaber@trash.net> CC: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
2009-07-23can: sja1000: Add support for the new 4 channel EMS CPC-PCI cardsSebastian Haas
This patch adds support to the ems_pci driver for the new, v2, 4 channel CPC-PCI/PCIe/104P CAN cards from EMS Dr. Thomas Wuensche. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20can: switch carrier on if device was stopped while in bus-off stateWolfgang Grandegger
This patch fixes a problem when a device is stopped while in the bus-off state. Then the carrier remains off forever. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@skynet.be> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20can: restart device even if dev_alloc_skb() failsWolfgang Grandegger
If dev_alloc_skb() failed in can_restart(), the device was left behind in the bus-off state. This patch restarts the device nevertheless. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20can: sja1000: remove duplicated includesWolfgang Grandegger
Remove duplicated #include('s) in drivers/net/can/sja1000/sja1000.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23can: let SJA1000 driver depend on HAS_IOMEMHeiko Carstens
Fixes this compile error on s390: drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_read_reg': drivers/net/can/sja1000/sja1000_platform.c:42: error: implicit declaration of function 'ioread8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_write_reg': drivers/net/can/sja1000/sja1000_platform.c:47: error: implicit declaration of function 'iowrite8' drivers/net/can/sja1000/sja1000_platform.c: In function 'sp_probe': drivers/net/can/sja1000/sja1000_platform.c:79: error: implicit declaration of function 'ioremap_nocache' Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10can: sja1000_of_platform: fix build problems with printk formatWolfgang Grandegger
According to "Documentation/printk-formats.txt", if the type is dependent on a config option for its size, like resource_size_t, we should use a format specifier of its largest possible type and explicitly cast to it. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 20:53:38 +0000