aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/cnic.c
AgeCommit message (Collapse)Author
2009-12-02cnic: Use dma_alloc_coherent().Michael Chan
Replace pci_alloc_consistent() with dma_alloc_coherent() so that appropriate GFP flags can be used. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix rq_page_table DMA address.Michael Chan
The old code mistakenly zeroed out the upper 32-bit of the DMA address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix bogus iSCSI MAC addressMichael Chan
Fix code to read the proper iSCSI MAC address for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix bnx2x ring shutdown.Michael Chan
Need to send a HALT command to the firmware to fully shutdown the bnx2x rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix ring I/O address for bnx2x devices.Michael Chan
Old code was initializing the ring producers using an incorrect I/O address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-19drivers/net: tasklet_init - Remove unnecessary leading & from second argJoe Perches
Changed function pointer use from non-majority address-of style to majority short form without & via: (was: 8 with &, 36 without) grep -rPl "\btasklet_init\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\btasklet_init\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Compile tested allyesconfig x86 Signed-off-by: Joe Perches <joe@perches.com> drivers/net/cnic.c | 4 ++-- drivers/net/jme.c | 10 +++++----- drivers/net/skge.c | 2 +- 3 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04cnic: ensure ulp_type is not negativeroel kluin
`ulp_type' is signed, make sure it is not negative when we read the array element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-28cnic: Fix L2CTX_STATUSB_NUM offset in context memory.Michael Chan
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12cnic: Need to include net/ip6_checksum.hDavid S. Miller
drivers/net/cnic.c: In function 'cnic_init_storm_conn_bufs': drivers/net/cnic.c:1757: error: implicit declaration of function 'csum_ipv6_magic' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add main functions to support bnx2x devices.Michael Chan
Add iSCSI support for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add bnx2x data structures.Michael Chan
Add hardware and software structures for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Refactor some code.Michael Chan
Refactor ring init. code for subsequent 10G patches. Also add rtnl_lock() in cnic_uio_open() to prevent race condition with netdev events. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02cnic: Fix NETDEV_UP event processing.Michael Chan
This fixes the problem of not handling the NETDEV_UP event properly during hot-plug or modprobe of bnx2 after cnic. The handling was skipped by mistakenly using "else if" to check for the event. Also update version to 2.0.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22cnic: Shutdown iSCSI ring during uio_close.Michael Chan
The iSCSI ring should be shutdown during uio_close instead of uio_open for proper operations. This fixes the problem of the ring getting stuck intermittently. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/yellowfin.c
2009-08-28cnic: Put uio init in separate function.Michael Chan
This will allow the 10G iSCSI code to reuse the function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28cnic: Put rx/tx ring allocation in separate function.Michael Chan
This will allow the 10G iSCSI code to reuse the function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix locking in init/exit calls.Michael Chan
The slow path ulp_init and ulp_exit calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and refcount during these calls. cnic_unregister_driver() will now wait for the refcount to go to zero before completing the call. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix locking in start/stop calls.Michael Chan
The slow path ulp_start and ulp_stop calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and setting a bit during these calls. cnic_unregister_device() will now wait for the bit to clear before completing the call. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Refine registration with bnx2.Michael Chan
Register and unregister with bnx2 during NETDEV_UP and NETDEV_DOWN events. This simplifies the sequence of events and allows locking fixes in the next patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix symbol_put_addr() panic on ia64.Michael Chan
When the cnic driver tries to grab a symbol from bnx2 when bnx2 is running init code, symbol_get() will succeed but symbol_put_addr() will hit BUG() a moment later. module_text_address() fails because bnx2 is still in init code. This is fixed by using symbol_put() instead which does the exact opposite of symbol_get(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.Michael Chan
When a net device goes down or when the bnx2i driver is unloaded, the code was not generating the ISCSI_KEVENT_IF_DOWN message properly and this could cause the userspace driver to crash. This is fixed by sending the message properly in the shutdown path. cnic_uio_stop() is also added to send the message when bnx2i is unregistering. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21cnic: Fix __symbol_get() build error.Michael Chan
Ingo molnar <mingo@elte.hu> reported the error drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’ when CONFIG_MODULES is not defined. Fix by using symbol_get() instead. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21Revert "[SCSI] cnic: fix error: implicit declaration of function ↵James Bottomley
‘__symbol_get’" This reverts commit bc3bf8fd330ce981ce632a1a4a283eee46838f32. All the commit did was add a second #include of <linux/module.h> which is the wrong fix. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-13[SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’Ingo Molnar
drivers/net/cnic.c: In function ‘init_bnx2_cnic’: drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’ drivers/net/cnic.c:2520: warning: assignment makes pointer from integer without a cast make[1]: *** [drivers/net/cnic.o] Error 1 make: *** [drivers/net/cnic.o] Error 2 Caused by not including linux/module.h Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-13[SCSI] cnic: fix undefined reference to `ip6_route_output'Randy Dunlap
Fix cnic build for case of CONFIG_INET=n. Fix cnic build for case of CONFIG_IPV6=m and CONFIG_CNIC=y. Fixes these build errors: cnic.c:(.text+0x236a1d): undefined reference to `ip_route_output_key' cnic.c:(.text+0x15a8e8): undefined reference to `ip6_route_output' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09[SCSI] cnic: Add new Broadcom CNIC driver.Michael Chan
The CNIC driver controls BNX2 hardware rings and resources used by iSCSI. Most hardware resources for iSCSI are separate from those used for ethernet networking. iSCSI uses a separate MAC address and IP address. The CNIC driver creates a UIO interface to handle the non-offloaded packets such as ARP, etc in userspace. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>