aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e100.c
AgeCommit message (Collapse)Author
2006-03-16Merge branch 'upstream-fixes'Jeff Garzik
2006-03-15e100: fix eeh on pseries during ethtool -tJesse Brandeburg
Olaf Hering reported a problem on pseries with e100 where ethtool -t would cause a bus error, and the e100 driver would stop working. Due to the new load ucode command the cb list must be allocated before calling e100_init_hw, so remove the call and just let e100_up take care of it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2006-03-04Fix io ordering problems in e100Catalin(ux aka Dino) BOIE
Checking e100.c code against Documentation/io_ordering.txt I found the following problem: spin_lock_irq... write spin-unlock e100_write_flush The attached patch fix the code like this: spin_lock_irq... write e100_write_flush spin-unlock Signed-off-by: Catalin BOIE <catab@umbrella.ro> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-07e100: remove init_hw call to fix panicJesse Brandeburg
e100 seems to have had a long standing bug where e100_init_hw was being called when it should not have been. This caused a panic due to recent changes that rely on correct set up in the driver, and more robust error paths. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e100: e100 whitespace fixesJesse Brandeburg
e100: e100 whitespace fixes These are whitespace only fixes. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e100: Handle the return values from pci_* functionsJesse Brandeburg
e100: Handle the return values from pci_* functions This is to resolve warnings during compile time. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)Jesse Brandeburg
e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) Set the end of list bit to cause the hardware's transmit state machine to work correctly and not prevent management (BMC) traffic. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-14[PATCH] Unlinline a bunch of other functionsArjan van de Ven
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] corruption during e100 MDI register accessODonnell, Michael
We have identified two related bugs in the e100 driver. Both bugs are related to manipulation of the MDI control register. The first problem is that the Ready bit is being ignored when writing to the Control register; we noticed this because the Linux bonding driver would occasionally come to the spurious conclusion that the link was down when querying Link State. It turned out that by failing to wait for a previous command to complete it was selecting what was essentially a random register in the MDI register set. When we added code that waits for the Ready bit (as shown in the patch file below) all such problems ceased. The second problem is that, although access to the MDI registers involves multiple steps which must not be intermixed, nothing was defending against two or more threads attempting simultaneous access. The most obvious situation where such interference could occur involves the watchdog versus ioctl paths, but there are probably others, so we recommend the locking shown in our patch file. Signed-off-by: Michael O'Donnell <Michael.ODonnell@stratus.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] e100: re-enable microcode with more useful defaultsJesse Brandeburg
For the four versions of hardware that we (currently) support microcode download on, the default configuration of our receive interrupt mitigation microcode was too aggressive, and caused unnecessary delays when pinging, and low(er) throughput on single connection latency sensitive performance tests. This code adds microcode support, and sets the defaults to more reasonable settings. It also explains the functionality in the code in more detail. Compile and load tested, shows expected behavior for slight delay of ping packets (1-2ms) when ucode is loaded, and decent interrupt moderation for small packets, while maintaining good throughput. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-07[PATCH] Fix sparse warning in e100 driver.Luiz Fernando Capitulino
The patch below fixes the following sparse warnings: drivers/net/e100.c:1481:13: warning: Using plain integer as NULL pointer drivers/net/e100.c:1767:27: warning: Using plain integer as NULL pointer drivers/net/e100.c:1847:27: warning: Using plain integer as NULL pointer Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-10-13Merge branch 'master'Jeff Garzik
2005-10-11e100: revert CPU cycle saver microcode, it causes severe problemsJeff Garzik
for certain NICs Reverting 685fac63f5ca6c5ca06bab641e1a32bbf9287e89: > [PATCH] e100: CPU cycle saver microcode > > > Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. > > Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> > Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> > Signed-off-by: John Ronciak <john.ronciak@intel.com> > Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21Merge /spare/repo/linux-2.6/Jeff Garzik
2005-09-14[PATCH] e100: support ETHTOOL_GPERMADDRJohn W. Linville
Add support for ETHTOOL_GPERMADDR to e100. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] e100: correct rx_dropped and add rx_missed_errorsJohn W. Linville
Do not count non-error frames dropped by the hardware as part of rx_dropped. Instead, count those frames dropped as rx_missed_errors. Also, do not count other error frames as part of rx_dropped. Finally, do not count oversized frames in rx_dropped (since they are counted as part of rx_length_errors). Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25[PATCH] e100: Driver version, white space, comments & otherMalli Chilakala
Driver version, white space, comments & other Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25[PATCH] e100: CPU cycle saver microcodeMalli Chilakala
Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25[PATCH] e100: Increased delay loop for command blocksMalli Chilakala
Increased delay loop for command blocks Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25[PATCH] e100: fixed endian bug in xmit_prepare routineMalli Chilakala
Fixed endian bug associated with cb_i bit in xmit_prepare Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25[PATCH] e100: added msleep_interruptible delayMalli Chilakala
added msleep_interruptible delay right before returning from diag_test Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25[PATCH] e100: Do not check Rx packet length against mtuMalli Chilakala
Do not check Rx packet length against mtu - patch from Darren Tucker Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-27Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Greg KH
2005-06-27[PATCH] PCI: make drivers use the pci shutdown callback instead of the ↵Greg Kroah-Hartman
driver core callback. Now we can change the pci core to always set this pointer, as pci drivers should use it, not the driver core callback. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] e100: NAPI performance enhancementsMalli Chilakala
NAPI performance enhancements - Fixed issues with shared interrupts and NAPI resulting in bad performance. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-06-27[PATCH] e100: e100_eeprom_load was called after e100_phy_initMalli Chilakala
e100_eeprom_load was called after e100_phy_init causing phy_init not to use values set in EEPROM - from emann@mrv.com Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-06-27[PATCH] e100: fixed e100 MDI/MDI-X issuesMalli Chilakala
Added patch from Eran Mann to fix following e100 MDI/MDI-X issues * MDI/MDI-X autodetection should never be enabled for 82551ER/QM chips * enabling this feature based on eeprom settings Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-06-26drivers/net/: Use the DMA_{64,32}BIT_MASK constantsDomen Puncer
Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org>
2005-05-12[PATCH] e100: Driver version, white space, comments, device idMalli Chilakala
Driver version, white space, comments. Also enabled ICH-7 support Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-05-12[PATCH] e100: Performance optimizations to e100 Tx PathMalli Chilakala
Performance optimizations to e100 Tx Path Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-05-12[PATCH] e100: Fix Wake on lan related issuesMalli Chilakala
Fix Wake on lan related issues Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-05-12[PATCH] e100: Synchronize interface link state with poll routineMalli Chilakala
Synchronize interface link state with e100 poll routine Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-05-12[PATCH] e100: Render e100 NAPI state machineMalli Chilakala
Render e100 NAPI state machine to be similar to the non-NAPI one. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-05-12[PATCH] e100: Execute tx_timeout task outside interrupt contextMalli Chilakala
Execute tx_timeout task outside the interrupt context Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!