aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/gianfar.c
AgeCommit message (Collapse)Author
2009-02-27gianfar: Do right check on num_txbdfreeRini van Zetten
This patch fixes a wrong check on num_txbdfree. It could lead to num_txbdfree become nagative. Result was that the gianfar stops sending data. Changes from first version : - removed a space between parens (David Millers comment) - full email address in signed off line Signed-off-by: Rini van Zetten <rini@arvoo.nl> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09gianfar: Fix boot hangs while bringing up gianfar ethernetJarek Poplawski
Ira Snyder found that commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844 "gianfar: Merge Tx and Rx interrupt for scheduling clean up ring" can cause hangs. It's because there was removed clearing of interrupts in gfar_schedule_cleanup() (which is called by an interrupt handler) in case when netif scheduling has been disabled. This patch brings back this action and a comment. Reported-by: Ira Snyder <iws@ovro.caltech.edu> Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Bisected-by: Ira Snyder <iws@ovro.caltech.edu> Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Tested-by: Ira Snyder <iws@ovro.caltech.edu> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04gianfar: Fix potential soft reset raceAndy Fleming
SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work properly. The syncs in the gfar_write() commands have been hiding this, but we need to guarantee it. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26gianfar: Revive VLAN supportAnton Vorontsov
commit 77ecaf2d5a8bfd548eed3f05c1c2e6573d5de4ba ("gianfar: Fix VLAN HW feature related frame/buffer size calculation") wrongly removed priv->vlgrp assignment, and now priv->vlgrp is always NULL. This patch fixes the issue, plus fixes following sparse warning introduced by the same commit: gianfar.c:1406:13: warning: context imbalance in 'gfar_vlan_rx_register' - wrong count at exit gfar_vlan_rx_register() checks for "if (old_grp == grp)" and tries to return w/o dropping the lock. According to net/8021q/vlan.c VLAN core issues rx_register() callback: 1. In register_vlan_dev() only on a newly created group; 2. In unregister_vlan_dev() only if the group becomes empty. Thus the check in the gianfar driver isn't needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12gianfar: Fix soft lockup with multi-interrupt TSECsAnton Vorontsov
This patch fixes following bug: BUG: soft lockup - CPU#0 stuck for 61s! [S03mountvirtfs-:922] Modules linked in: NIP: c006505c LR: c00675f0 CTR: c0020438 REGS: c7a1db90 TRAP: 0901 Not tainted (2.6.28-rc8-01311-g8c7396a) MSR: 00009032 <EE,ME,IR,DR> CR: 28248442 XER: 20000000 TASK = c7a288a0[922] 'S03mountvirtfs-' THREAD: c7a1c000 GPR00: 00009032 c7a1dc40 c7a288a0 00000024 c79a1840 00000000 00000300 00000020 GPR08: c035f97c 00000000 00004008 c04d5210 00000000 NIP [c006505c] handle_IRQ_event+0x34/0xb0 LR [c00675f0] handle_level_irq+0xa8/0x144 Call Trace: [c7a1dc40] [c00204d8] ipic_mask_irq+0xa0/0xb4 (unreliable) [c7a1dc60] [c00675f0] handle_level_irq+0xa8/0x144 [c7a1dc80] [c00067f8] do_IRQ+0x78/0x108 [c7a1dc90] [c0014d7c] ret_from_except+0x0/0x14 --- Exception: 501 at gfar_schedule_cleanup+0x54/0x7c LR = gfar_transmit+0x14/0x28 [c7a1dd50] [c0352a3c] _spin_unlock_irqrestore+0x18/0x30 (unreliable) [c7a1dd60] [c01f49a8] gfar_transmit+0x14/0x28 [c7a1dd70] [c0065084] handle_IRQ_event+0x5c/0xb0 [c7a1dd90] [c00675f0] handle_level_irq+0xa8/0x144 [c7a1ddb0] [c00067f8] do_IRQ+0x78/0x108 [c7a1ddc0] [c0014d7c] ret_from_except+0x0/0x14 --- Exception: 501 at up_read+0x10/0x48 LR = do_page_fault+0x2b0/0x3e0 [c7a1de80] [c7a177e8] 0xc7a177e8 (unreliable) [c7a1de90] [c0017964] do_page_fault+0x2b0/0x3e0 [c7a1df40] [c0014b14] handle_page_fault+0xc/0x80 --- Exception: 301 at 0xfe98b7c LR = 0xfe989c0 Instruction dump: 7c0802a6 bf810010 7c9f2378 7c7c1b78 90010024 80040004 70090020 40820010 7c0000a6 60008000 7c000124 3bc00000 <3ba00000> 48000010 83ff0014 2f9f0000 The bug introduced by commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844 ("gianfar: Merge Tx and Rx interrupt for scheduling clean up ring"). The commit merged TX and RX interrupt code into a single routine that schedules NAPI, but no locks were introduced. This causes irq races, so when irqs are enabled and netif_rx_schedule_prep() returns 0, nobody disable the interrupts again. This leads to interrupt storm and finally to the lockup. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11netdev: gianfar: add MII ioctl handlerClifford Wolf
This is the same kind of wrapper that can also be found in many other network device drivers. Tested with a freescale MPC8349E host CPU: Toggled the interface LEDs on a DP83865 PHY. Signed-off-by: Clifford Wolf <clifford@clifford.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08gianfar: Fixup use of BUS_ID_SIZEKumar Gala
Commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver") went back to using BUS_ID_SIZE instead of sizeof() as per the larger patch series that will remove "char bus_id[20]" from struct device. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-06gianfar: ensure ECNTRL[R100] is cleared on link state changeLi Yang
When changing the link between 100Mbps and 1Gbps in SGMII mode it was found out that the link would stop working. The issue is that ECNTRL[R100] needs to be cleared when in 1Gbps mode. Older reference manuals didn't require the explicitly clearing but has since been found it that it is needed. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17gianfar: Continue polling until both tx and rx are emptyAndy Fleming
gfar_poll would declare polling done once the rx queue was empty, but the tx queue could still have packets left. Stolen mostly from the e1000 driver. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17gianfar: Merge Tx and Rx interrupt for scheduling clean up ringDai Haruki
No clean up function is executed in the interrupt context by this patch. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17gianfar: Use interface name in interrupt name to distinguish the source.Dai Haruki
Interface name (ex. eth0) is used as the prefix for the interrupt name, with _rx, _tx, and _er appended to distinguish multiple interrupts on the same interface. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17gianfar: Add Scatter Gather supportDai Haruki
Scatter Gather support in gianfar driver to handle fragmented frames on the transmit side. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17gianfar: Fix packet drop when out of memoryAndy Fleming
The patch which fixed gianfar so it drops packets when it runs out of memory left in the code which frees the skb when it drops packets. Change the code so that we only free the skb if the new skb was successfully created. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Make all BD status writes 32-bitDai Haruki
Whenever we want to update the status field in a BD, we usually want to update the length field, too. By combining them into one 32-bit field, we reduce the number of stores to memory shared with the controller, and we eliminate the need for order-enforcement, as the length and "READY" bit are now updated atomically at the same time. Signed-off-by: Dai Haruki <Dai.Haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Add macros for stepping through BDsAndy Fleming
This code is based strongly on code from Dai Haruki <Dai.Haruki@freescale.com>. The gianfar Buffer Descriptors are arranged in a circular array, the end of which is denoted by setting the "WRAP" bit in the descriptor. However, the software knows the end of the ring because it knows how many descriptors are there. Rather than check each descriptor for whether the WRAP bit is set, use pointer math to determine where the next BD is. This is also useful for when we want to look at BDs other than the very next one (for Scatter-Gather). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Remove unused gfar_add_fcb() function parameterDai Haruki
- Also, use cacheable_memzero instead of memset for performance reasons. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Enable padding and Optimize the frame prepended bytes handlingDai Haruki
The eTSEC can prepend up to 32 bytes to a received frame, usually for the purpose of aligning the IP address to a word boundary, so this turns it on. While we're in there, make the handling of the pre-frame bytes (padding and Frame Control Block) cleaner. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Fix VLAN HW feature related frame/buffer size calculation.Dai Haruki
Optimize the VLAN checking logic as well. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Fix eTSEC configuration procedureDai Haruki
Fix some bugs in the ethtool configuration functions: * gfar_clean_rx_ring should not be called with interrupts disabled. * Update last transmission time to avoid tx timeout. * Delete redundant NETIF_F_IP_CSUM check in gfar_start_xmit * Use netif_tx_lock_bh when reconfiguring the tx csum Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Optimize interrupt coalescing configurationDai Haruki
Store the interrupt coalescing values in the form in which they will be written to the interrupt coalescing registers. This puts a little overhead into the ethtool configuration, and takes it out of the interrupt handler Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Convert gianfar to an of_platform_driverAndy Fleming
Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16gianfar: Use gfar_halt to stop DMA in gfar_probeAndy Fleming
gfar_halt does everything we want to do there, including disabling TX/RX. It also doesn't unnecessarily enable DMA if it's already stopped. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/isdn/i4l/isdn_net.c fs/cifs/connect.c
2008-11-14gianfar: Fix DMA unmap invocationsAndy Fleming
We weren't unmapping DMA memory, which will break when gianfar gets used on systems with more than 32-bits of memory. Also, it's just plain wrong. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/p54/p54common.c
2008-10-31gianfar: Don't reset TBI<->SerDes link if it's already upTrent Piepho
The link may be up already via the chip's reset strapping, or though action of U-Boot, or from the last time the interface was brought up. Resetting the link causes it to go down for several seconds. This can significantly increase the time from power-on to DHCP completion and a device being accessible to the network. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31gianfar: Fix race in TBI/SerDes configurationTrent Piepho
The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-22gianfar: fix handle errors returned by platform_get_irq*()roel kluin
platform_get_irq*() returns on -ENXIO when the resource cannot be found, but this remains unnoticed if stored in an unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-08gianfar: Create net device with carrier downTrent Piepho
The device's carrier status is controlled via the functions netif_carrier_on() and netif_carrier_off(). These set or clear a bit indicating the carrier (aka lower level link) is down, and if the state changed, they fire off a routing netlink event. Add a call to netif_carrier_off() before register_netdev() so that the newly created device will be set to carrier down. Then when the carrier comes up for the first time, a netlink event will be generated, as the carrier changed from down to up. Otherwise the initial carrier up will appear to be changing the status from up to up, and so no event is generated since that's not a change. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27net: don't grab a mutex within a timer context in gianfarSebastian Siewior
I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14gianfar: Call gfar_halt_nodisable() from gfar_halt().Scott Wood
gfar_halt() was factored out into halting and disabling by commit d87eb12785c14de1586e3bad86ca2c0991300339, as the suspend() method only wants to do the former. However, the call to gfar_halt_nodisable() from gfar_halt() apparently got lost during the patch respin process. This adds it back. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07remove bogus CONFIG_GFAR_NAPI'sAdrian Bunk
The commit that made the CONFIG_GFAR_NAPI code unconditional was included at the same time as a new CONFIG_GFAR_NAPI user, resulting in these bugus #ifdef's. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22Merge commit 'origin/master'Benjamin Herrenschmidt
Manually fixed up: drivers/net/fs_enet/fs_enet-main.c
2008-07-21gianfar: do not touch net queue in adjust_link phylib callbackAnton Vorontsov
If the net queue has not been started, we'll get this nice oops and non-working ethernet: PHY: 0:01 - Link is Up - 1000/Full ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1328! Oops: Exception in kernel mode, sig: 5 [#1] MPC837x RDB Modules linked in: NIP: c02544a0 LR: c01a17d0 CTR: c01a16ac REGS: cf837e40 TRAP: 0700 Not tainted (2.6.26-05253-g14b395e) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf819400[5] 'events/0' THREAD: cf836000 GPR00: c01a17d0 cf837ef0 cf819400 c03d8d08 cf8469a0 00000064 00000000 00000000 GPR08: c03d8d08 00000001 00000001 cf899ba0 22044044 00000000 0fffd000 00000000 GPR16: 0fff3028 0fff6cf0 00000000 0fff8390 0ff494a0 00000004 00000000 00000000 GPR24: c0361a00 00001058 cf9f6600 00009032 cf846800 cf846b80 00000001 00000014 NIP [c02544a0] __netif_schedule+0x28/0x8c LR [c01a17d0] adjust_link+0x124/0x1cc Call Trace: [cf837ef0] [c03fb3a0] 0xc03fb3a0 (unreliable) [cf837f10] [c01a17d0] adjust_link+0x124/0x1cc [cf837f40] [c01a8e28] phy_state_machine+0x2e0/0x448 [cf837f60] [c0040254] run_workqueue+0xc8/0x168 [cf837f90] [c00408d8] worker_thread+0x70/0xd0 [cf837fd0] [c0044630] kthread+0x48/0x84 [cf837ff0] [c0012610] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c03e 9421ffe0 7c0802a6 7c681b78 39298d08 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace 13dfd73ee42d0c30 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Convert all drivers away from netif_schedule().David S. Miller
They logically all want to trigger a schedule for all device TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16gianfar: Add magic packet and suspend/resume support.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-11gianfar: delete non NAPI code from the driver.Francois Romieu
Compile-tested only. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-4965-rs.c drivers/net/wireless/rt2x00/rt61pci.c
2008-05-13[netdrvr] Trim trailing whitespace for several driversJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13gianfar: Fix a bug where the pointer never moves for dma_unmap...Andy Fleming
The loop that unmaps all of the TX Buffer Descriptors never actually moves the txbd pointer, so we were just repeatedly unmapping the first one. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06gianfar: Fix a locking bug in gianfar's sysfs codeAndy Fleming
During sparse cleanup, found a locking bug. Some of the sysfs functions were acquiring a lock, and then returning in the event of an error. We rearrange the code so that the lock is released in error conditions, too. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29[netdrvr] gianfar: Determine TBIPA value dynamicallyPaul Gortmaker
TBIPA needs to be set to a value (on connected MDIO buses) that doesn't conflict with PHYs on the bus. By hardcoding it to 0x1f, we were preventing boards with PHYs at 0x1f from working properly. Instead, scan the bus when it comes up, and find an address that doesn't have a PHY on it. The TBI PHY configuration code then trusts that the value in TBIPA is either safe, or doesn't matter (ie - it's not an active bus with other PHYs). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25gianfar: Fix skb allocation strategyAndy Fleming
gianfar was unable to handle failed skb allocation for rx buffers, so we were spinning until it succeeded. Actually, it was worse--we were spinning for a long time, and then silently failing. Instead, we take Stephen Hemminger's suggestion to try the allocation earlier, and drop the packet if it failed. We also make a couple of tweaks to how buffer descriptors are set up. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25net drivers: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable network platform drivers, to re-enable auto loading. NOTE: didn't change drivers/net/fs_enet/fs_enet-main.c "old binding" support. That looks problematic in the first place (it even uses the ancient "struct device_driver" binding scheme for platform_bus!) and I suspect it will vanish soonish when arch/powerpc rules the world. Also, drivers/net/ne.c would have needed more thought to sort out. [akpm@linux-foundation.org: fix sgiseeq.c] [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16gianfar: Support NAPI for TX FramesDai Haruki
Poll the completed TX frames in gfar_poll(). This prevents the tx completion interrupt from interfering with processing of received frames. We also disable hardware rx coalescing when NAPI is enabled. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-26gianfar: Fix Rx/Tx HW interrupt coalescing counter reset procedure.Andy Fleming
- Fix Rx/Tx HW interrupt coalescing counter reset logic. Disabling is required before resetting the counter. - Update the Default both Rx and Tx coalescing timer threshold. Formerly 4 is set which is equal to 1.5 frame at the line rate of 1GbE interface, and it doesn't match to the coalescing frame count which is set to 16. Threashold 21 is matched to frame count 16. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 10:04:52 +0000