aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixp2000
AgeCommit message (Collapse)Author
2005-12-03[PATCH] ixp2000: change netif_schedule_test to __netif_schedule_prepStephen Hemminger
Sky2 update changed name of netif_schedule_test to __netif_schedule_prep Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: add driver version, bump version to 0.2Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: add netpoll supportLennert Buytenhek
Add netpoll support to the ixp2000 driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: disable/enable SERDES carrier on interface down/upLennert Buytenhek
Disable/enable the SERDES carrier when an interface is administratively downed/upped. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: implement resetLennert Buytenhek
Implement pm3386 reset. A reset zeroes out the internally stored MAC addresses, so we need to save and reload them by hand. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: add hook for setting carrierLennert Buytenhek
Add a pm3386 hook for disabling/enabling the SERDES carrier, so that we can disable it when the interface is administratively downed, and enable it when it is upped. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: add hook for setting MAC addressLennert Buytenhek
When we reset the pm3386, it loses its internally stored MAC addresses that were programmed into it by the bootloader (and are used by the hardware for the generation of PAUSE frames.) Add a hook to allow setting these addresses so that we can program them back by hand. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: report MAC addresses for each port on initLennert Buytenhek
After initialising, report the MAC address that we're using for each port. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: report link up/down eventsLennert Buytenhek
Report carrier going up/down. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: use 'dev' in link status timerLennert Buytenhek
We assign nds[i] to a local variable 'dev', which we never use afterwards. Use the local variable instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: don't check netif_running() in link status timerLennert Buytenhek
Even after an interface has gone !netif_running(), we still want to catch the 'carrier went down' event for our internal bookkeeping. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: use netif_rx_schedule_testLennert Buytenhek
The sky2 driver introduced netif_rx_schedule_test(). This is exactly what we need, so remove our local version of this function (which was called netif_rx_schedule_prep_notup) and use the generic one instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] caleb/pm3386: include proper header filesLennert Buytenhek
Make caleb.c and pm3386.c include their own header files, to catch incorrect prototype definitions. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: remove unnecessary udelaysLennert Buytenhek
Remove a number of unnecessary udelay() calls. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: zero stats properlyLennert Buytenhek
Zero our stats structure properly. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: register netdevices lastLennert Buytenhek
Do not register our netdevices with the kernel until we've actually finished setting up the hardware and microcode. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] intel ixp2000 network driverLennert Buytenhek
The way the hardware and firmware work is that there is one shared RX queue and IRQ for a number of different network interfaces. Due to this, we would like to process received packets for every interface in the same NAPI poll handler, so we need a pseudo-device to schedule polling on. What the driver currently does is that it always schedules polling for the first network interface in the list, and processes packets for every interface in the poll handler for that first interface -- however, this scheme breaks down if the first network interface happens to not be up, since netif_rx_schedule_prep() checks netif_running(). sky2 apparently has the same issue, and Stephen Hemminger suggested a way to work around this: create a variant of netif_rx_schedule_prep() that does not check netif_running(). I implemented this locally and called it netif_rx_schedule_prep_notup(), and it seems to work well, but it's something that probably not everyone would be happy with. The ixp2000 is an ARM CPU with a high-speed network interface in the CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.) The CPU package also contains 8 or 16 (again depending on the IXP model) 'microengines', which are somewhat primitive but very fast and efficient processor cores which can be used to offload various things from the main CPU. This driver makes the high-speed network interface in the CPU visible and usable as a regular linux network device. Currently, it only supports the Radisys ENP2611 IXP board, but adding support for other board types should be fairly easy. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>