aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/mv643xx_eth.c
AgeCommit message (Collapse)Author
2009-01-19mv643xx_eth: prevent interrupt storm on ifconfig downGabriel Paubert
Contrary to what the docs say, the 'extended interrupt cause' bit in the interrupt cause register (bit 1) appears to not be maskable on at least some of the mv643xx_eth platforms, making writing zeroes to the interrupt mask register but not the extended interrupt mask register insufficient to stop interrupts from occuring. Therefore, also write zeroes to the extended interrupt mask register when shutting down the port. This fixes the interrupt storm seen on the Pegasos board when shutting down the interface. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19mv643xx_eth: fix multicast filter programmingLennert Buytenhek
Commit 66e63ffbc04706568d8789cbb00eaa8ddbcae648 ("mv643xx_eth: implement ->set_rx_mode()") cleaned up mv643xx_eth's multicast filter programming, but broke it as well. The non-special multicast filter table (for multicast addresses that are not of the form 01:00:5e:00:00:xx) consists of 256 hash table buckets organised as 64 32-bit words, where the 'accept' bits are in the LSB of each byte, so in bits 24 16 8 0 of each 32-bit word. The old code got this right, but the referenced commit broke this by using bits 3 2 1 0 instead. This commit fixes this up. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19Revert "mv643xx_eth: use longer DMA bursts".Lennert Buytenhek
This reverts commit cd4ccf76bfd2c36d351e68be7e6a597268f98a1a. On the Pegasos board, we can't do DMA burst that are longer than one cache line. For now, go back to using 32 byte DMA bursts for all mv643xx_eth platforms -- we can switch the ARM-based platforms back to doing long 128 byte bursts in the next development cycle. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reported-by: Alan Curry <pacman@kosh.dhis.org> Reported-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c include/net/mac80211.h net/phonet/af_phonet.c
2008-11-20mv643xx_eth: calculate descriptor pointer only once in rxq_refill()Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: move receive error handling out of lineLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: implement ->set_rx_mode()Lennert Buytenhek
Currently, if multiple unicast addresses are programmed into a mv643xx_eth interface, the core networking will resort to enabling promiscuous mode on the interface, as mv643xx_eth does not implement ->set_rx_mode(). This patch switches mv643xx_eth over from ->set_multicast_list() to ->set_rx_mode(), and implements support for secondary unicast addresses. The hardware can handle multiple unicast addresses as long as their first 11 nibbles are the same (i.e. are of the form xx:xx:xx:xx:xx:xy where the x part is the same for all addresses), so if that is the case, we use that mode. If it's not the case, we enable unicast promiscuous mode in the hardware, which is slightly better than enabling promiscuous mode for multicasts as well, which is what would happen before. While we are at it, change the programming sequence so that we don't clear all filter bits first, so we don't lose all incoming packets while the filter is being reprogrammed. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: inline txq_alloc_desc_index()Lennert Buytenhek
Since txq_alloc_desc_index() is a very simple function, and since descriptor ring index handling for transmit reclaim, receive processing and receive refill is already handled inline as well, inline txq_alloc_desc_index() into its two call sites. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: introduce per-port register area pointerLennert Buytenhek
The mv643xx_eth driver uses the rdl()/wrl() macros to read and write hardware registers. Per-port registers are accessed in the following way: #define PORT_STATUS(p) (0x0444 + ((p) << 10)) [...] static inline u32 rdl(struct mv643xx_eth_private *mp, int offset) { return readl(mp->shared->base + offset); } [...] port_status = rdl(mp, PORT_STATUS(mp->port_num)); By giving the per-port 'struct mv643xx_eth_private' its own 'void __iomem *base' pointer that points to the per-port register area, we can get rid of both the double indirection and the << 10 that is done for every per-port register access -- this patch does that. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: checkpatch fixesLennert Buytenhek
Fix up a couple of coding style issues caught by checkpatch. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: fix recycle check boundLennert Buytenhek
When mv643xx_eth allocates skbuffs, it adds 'dma_get_cache_alignment() - 1' to the length it needs, so that it can align the skb's ->data pointer to a cache boundary. When checking whether a transmitted skbuff can be reused as a receive buffer, these bytes needs to be included into the minimum bound for the recycle check. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: fix the order of mdiobus_{unregister, free}() callsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03mv643xx_eth: fix SMI bus access timeoutsLennert Buytenhek
The mv643xx_eth mii bus implementation uses wait_event_timeout() to wait for SMI completion interrupts. If wait_event_timeout() would return zero, mv643xx_eth would conclude that the SMI access timed out, but this is not necessarily true -- wait_event_timeout() can also return zero in the case where the SMI completion interrupt did happen in time but where it took longer than the requested timeout for the process performing the SMI access to be scheduled again. This would lead to occasional SMI access timeouts when the system would be under heavy load. The fix is to ignore the return value of wait_event_timeout(), and to re-check the SMI done bit after wait_event_timeout() returns to determine whether or not the SMI access timed out. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08mv643xx_eth: include linux/ip.h to fix buildLennert Buytenhek
mv643xx_eth uses ip_hdr() (defined in linux/ip.h), but relied on another header file to include the needed header file indirectly. In latest net-next this indirect include chain is gone, so the driver fails to build. Include linux/ip.h explicitly to fix this. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08phylib: move to dynamic allocation of struct mii_busLennert Buytenhek
This patch introduces mdiobus_alloc() and mdiobus_free(), and makes all mdio bus drivers use these functions to allocate their struct mii_bus'es dynamically. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Andy Fleming <afleming@freescale.com>
2008-10-08phylib: rename mii_bus::dev to mii_bus::parentLennert Buytenhek
In preparation of giving mii_bus objects a device tree presence of their own, rename struct mii_bus's ->dev argument to ->parent, since having a 'struct device *dev' that points to our parent device conflicts with introducing a 'struct device dev' representing our own device. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Andy Fleming <afleming@freescale.com>
2008-10-01mv643xx_eth: hook up skb recyclingLennert Buytenhek
This gives a nice increase in the maximum loss-free packet forwarding rate in routing workloads. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19mv643xx_eth: bump version to 1.4Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-19mv643xx_eth: convert to phylibLennert Buytenhek
Switch mv643xx_eth from using drivers/net/mii.c to using phylib. Since the mv643xx_eth hardware does all the link state handling and PHY polling, the driver will use phylib in the "Doing it all yourself" mode described in the phylib documentation. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com>
2008-09-19mv643xx_eth: enforce frequent hardware statistics pollingLennert Buytenhek
If we don't poll the hardware statistics counters at least once every ~34 seconds, overflow might occur without us noticing. So, set up a timer to poll the statistics counters at least once every 30 seconds. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-19mv643xx_eth: deal with unexpected ethernet header sizesLennert Buytenhek
When the IP header doesn't start 14, 18, 22 or 26 bytes into the packet (which are the only four cases that the hardware can deal with if asked to do IP checksumming on transmit), invoke the software checksum helper instead of letting the packet go out with a corrupt checksum inserted into the packet in the wrong place. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-19mv643xx_eth: fix receive checksummingLennert Buytenhek
We have to explicitly tell the hardware to include the pseudo-header when doing receive checksumming, otherwise hardware checksumming will fail for every received packet and we'll end up setting CHECKSUM_NONE on every received packet. While we're at it, when skb->ip_summed is set to CHECKSUM_UNNECESSARY on received packets, skb->csum is supposed to be undefined, and thus there is no need to set it. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: add support for chips without transmit bandwidth controlLennert Buytenhek
Add support for mv643xx_eth versions that have no transmit bandwidth control registers at all, such as the ethernet block found in the Marvell 88F6183 ARM SoC. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: avoid reading ->byte_cnt twice during receive processingLennert Buytenhek
Currently, the receive processing reads ->byte_cnt twice (once to update interface statistics and once to properly size the data area of the received skb), but since receive descriptors live in uncached memory, caching this value in a local variable saves one uncached access, and increases routing performance a tiny little bit more. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: shrink default receive and transmit queue sizesLennert Buytenhek
Since the size of the receive queue is directly related to the data cache footprint of the driver (between refilling a receive ring entry with a fresh skb and receiving a packet in that entry, queue_size - 1 other skbs will have been touched), shrink the default receive queue size to a saner number of entries, as 400 is definite overkill for almost all workloads. While we are at it, trim the default transmit queue size a bit as well. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: replace array of skbs awaiting transmit completion with a queueLennert Buytenhek
Get rid of the skb pointer array that we currently use for transmit reclaim, and replace it with an skb queue, to which skbuffs are appended when they are passed to the xmit function, and removed from the front and freed when we do transmit queue reclaim and hit a descriptor with the 'owned by device' bit clear and 'last descriptor' bit set. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: avoid dropping tx lock during transmit reclaimLennert Buytenhek
By moving DMA unmapping during transmit reclaim back under the netif tx lock, we avoid the situation where we read the DMA address and buffer length from the descriptor under the lock and then not do anything with that data after dropping the lock on platforms where the DMA unmapping routines are all NOPs (which is the case on all ARM platforms that mv643xx_eth is used on at least). This saves two uncached reads, which makes a small but measurable performance difference in routing benchmarks. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: switch to netif tx queue lock, get rid of private spinlockLennert Buytenhek
Since our ->hard_start_xmit() method is already called under spinlock protection (the netif tx queue lock), we can simply make that lock cover the private transmit state (descriptor ring indexes et al.) as well, which avoids having to use a private lock to protect that state. Since this was the last user of the driver-private spinlock, it can be killed off. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-14mv643xx_eth: move all work to the napi poll handlerLennert Buytenhek
Move link status handling, transmit reclaim and TX_END handling from the interrupt handler to the napi poll handler. This allows switching ->lock over to a non-IRQ-safe lock and removes all explicit interrupt disabling from the driver. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: transmit multiqueue supportLennert Buytenhek
As all the infrastructure for multiple transmit queues already exists in the driver, this patch is entirely trivial. The individual transmit queues are still serialised by the driver's per-port private spinlock, but that will disappear (i.e. be replaced by the per-subqueue ->_xmit_lock) in a subsequent patch. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: delete unused and uninteresting interrupt source mask bitsLennert Buytenhek
Delete a couple of unused and uninteresting interrupt source mask bits: - The receive resource underrun interrupt sources are uninteresting because if we are in out-of-memory mode, we are already dealing with the issue, and we don't need the hardware to remind us again that we are out of memory. - The LINK and PHY interrupt sources can be coalesced into one define, since we always use them together. - The transmit resource underrun interrupt source can be disabled since we never activate the head descriptor of a paged skb until the fragments are all activated, so transmit underrun during a packet should never happen. - The INT_EXT_TX_0 define is never used. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: get rid of netif_{stop,wake}_queue() calls on link down/upLennert Buytenhek
There is no need to call netif_{stop,wake}_queue() when the link goes down/up, as the networking already takes care of this internally. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: remove force_phy_addr fieldLennert Buytenhek
Currently, there are two different fields in the mv643xx_eth_platform_data struct that together describe the PHY address -- one field (phy_addr) has the address of the PHY, but if that address is zero, a second field (force_phy_addr) needs to be set to distinguish the actual address zero from a zero due to not having filled in the PHY address explicitly (which should mean 'use the default PHY address'). If we are a bit smarter about the encoding of the phy_addr field, we can avoid the need for a second field -- this patch does that. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: smi sharing is a per-unit property, not a per-port oneLennert Buytenhek
Which top-level unit's SMI interface to use should be a property of the top-level unit, not of the individual ports. This patch moves the ->shared_smi pointer from the per-port platform data to the global platform data. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: require contiguous receive and transmit queue numberingLennert Buytenhek
Simplify receive and transmit queue handling by requiring the set of queue numbers to be contiguous starting from zero. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: get rid of compile-time configurable transmit checksummingLennert Buytenhek
Get rid of the mv643xx_eth-internal MV643XX_ETH_CHECKSUM_OFFLOAD_TX compile-time option. Using transmit checksumming is the sane default, and anyone wanting to disable it should use ethtool(8) instead of recompiling their kernels. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: get rid of receive-side lockingLennert Buytenhek
By having the receive out-of-memory handling timer schedule the napi poll handler and then doing oom processing from the napi poll handler, all code that touches receive state moves to napi context, letting us get rid of all explicit locking in the receive paths since the only mutual exclusion we need anymore at that point is protection against reentering ourselves, which is provided by napi synchronisation. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: make napi unconditionalLennert Buytenhek
Make napi unconditional on the receive side, so that we can get rid of all the locking and local interrupt disabling in the receive path. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: use the SMI done interrupt to wait for SMI access completionLennert Buytenhek
If the platform code has passed us the IRQ number of the mv643xx_eth top-level error interrupt, use the error interrupt to wait for SMI access completion instead of polling the SMI busy bit, since SMI bus accesses can take up to tens of milliseconds. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: switch ->phy_lock from a spinlock to a mutexLennert Buytenhek
Since commit 81600eea98789da09a32de69ca9d3be8b9503c54 ("mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface"), mv643xx_eth no longer does SMI accesses from interrupt context. The only other callers that do SMI accesses all do them from process context, which means we can switch the PHY lock from a spinlock to a mutex, and get rid of the extra locking in some ethtool methods. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: get rid of modulo operationsLennert Buytenhek
Get rid of the modulo operations that are currently used for computing successive TX/RX descriptor ring indexes. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: get rid of IRQF_SAMPLE_RANDOMLennert Buytenhek
Using IRQF_SAMPLE_RANDOM for the mv643xx_eth interrupt handler significantly increases interrupt processing overhead, so get rid of it. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: fix receive buffer DMA unmappingLennert Buytenhek
When tearing down a DMA mapping for a receive buffer, we should pass dma_unmap_single() the exact same address that dma_map_single() gave us when we originally set up the mapping. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05mv643xx_eth: fix 'netdev_priv(dev) == dev->priv' assumptionLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-24mv643xx_eth: bump version to 1.3Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-24mv643xx_eth: enforce multiple-of-8-bytes receive buffer size restrictionLennert Buytenhek
The mv643xx_eth hardware ignores the lower three bits of the buffer size field in receive descriptors, causing the reception of full-sized packets to fail at some MTUs. Fix this by rounding the size of allocated receive buffers up to a multiple of eight bytes. While we are at it, add a bit of extra space to each receive buffer so that we can handle multiple vlan tags on ingress. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-24mv643xx_eth: fix NULL pointer dereference in rxq_process()Lennert Buytenhek
When we are low on memory, the assumption that every descriptor in the receive ring will have an skbuff associated with it does not hold. rxq_process() was assuming that if the receive descriptor it is working on is not owned by the hardware, it can safely be processed and handed to the networking stack. But a descriptor in the receive ring not being owned by the hardware can also happen when we are low on memory and did not manage to refill the receive ring fully. This patch changes rxq_process()'s bailout condition from "the first receive descriptor to be processed is owned by the hardware" to "the first receive descriptor to be processed is owned by the hardware OR the number of valid receive descriptors in the ring is zero". Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>