aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/mv643xx_eth.c
AgeCommit message (Collapse)Author
2007-04-25[SK_BUFF]: Introduce tcp_hdr(), remove skb->h.thArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce udp_hdr(), remove skb->h.uhArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-28mv643xx_eth: Fix use of uninitialized port_num fieldGabriel Paubert
In this driver, the default ethernet address is first set by by calling eth_port_uc_addr_get() which reads the relevant registers of the corresponding port as initially set by firmware. However that function used the port_num field accessed through the private area of net_dev before it was set. The result was that one board I have ended up with the unicast address set to 00:00:00:00:00:00 (only port 1 is connected on this board). The problem appeared after commit 84dd619e4dc3b0b1c40dafd98c90fd950bce7bc5. This patch fixes the bug by setting mp->port_num prior to calling eth_port_uc_get_addr(). Signed-off-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23mv643xx_eth: add mv643xx_eth_shutdown functionDale Farnsworth
mv643xx_eth_shutdown is needed for kexec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09mv643xx: Clear pending interrupts before calling request_irqDale Farnsworth
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Giridhar Pemmasani <pgiri@yahoo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06mv643xx_eth: Place explicit port number in mv643xx_eth_platform_dataDale Farnsworth
We were using the platform_device.id field to identify which ethernet port is used for mv643xx_eth device. This is not generally correct. It will be incorrect, for example, if a hardware platform uses a single port but not the first port. Here, we add an explicit port_number field to struct mv643xx_eth_platform_data. This makes the mv643xx_eth_platform_data structure required, but that isn't an issue since all users currently provide it already. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02mv643xx_eth: move mac_addr inside mv643xx_eth_platform_dataDale Farnsworth
The information contained within platform_data should be self-contained. Replace the pointer to a MAC address with the actual MAC address in struct mv643xx_eth_platform_data. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27Alignment in mv643xx_ethRalf Baechle
The driver contains this little piece of candy: #if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_NOT_COHERENT_CACHE) #define ETH_DMA_ALIGN L1_CACHE_BYTES #else #define ETH_DMA_ALIGN 8 #endif Any reason why we're not using dma_get_cache_alignment() instead? Ralf Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09[PATCH] misc duplicate field initializersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23mv643xx_eth: Fix race condition in mv643xx_eth_free_tx_descsDale Farnsworth
mv643xx_eth: Fix race condition in mv643xx_eth_free_tx_descs This bug was found and isolated by Thibaut VARENE <T-Bone@parisc-linux.org> and Jarek Poplawski <jarkao2@o2.pl>. This patch is a modification of their fixes. We acquire and release the lock for each descriptor that is freed to minimize the time the lock is held. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07Merge branch 'master' into upstreamJeff Garzik
Conflicts: drivers/net/netxen/netxen_nic.h drivers/net/netxen/netxen_nic_main.c
2006-12-06[PATCH] ... and more work_struct-induced breakage (mips)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[PATCH] mv643xx_eth.c NULL noise removalAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-10-20Revert "[mv643xx] Add pci device table for auto module loading."Linus Torvalds
This reverts commit 4596c75c23dde2623cbeec69357d5eb13d28387e as requested by Olaf Hering. It causes compile errors, and says Olaf: "This change is also wrong, the autoloading works perfect with 2.6.18, no need to add random PCI ids. See commit a0245f7ad5214cb00131d7cd176446e067c913dc, platform devices have now a modalias entry in sysfs. The network card is not a PCI device." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-18[mv643xx] Add pci device table for auto module loading.Ben Collins
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-10-11Merge branch 'master' into upstream-fixesJeff Garzik
2006-10-08[PATCH] misc ppc pt_regs fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05[PATCH] mv643xx_eth: Fix ethtool statsMaxime Bizon
Some stats reported by ethtool -S on mv643xx_eth device are cleared between each call. This patch fixes it. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-24Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits) net/ieee80211: fix more crypto-related build breakage [PATCH] Spidernet: add ethtool -S (show statistics) [NET] GT96100: Delete bitrotting ethernet driver [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM [PATCH] Cirrus Logic ep93xx ethernet driver r8169: the MMIO region of the 8167 stands behin BAR#1 e1000, ixgb: Remove pointless wrappers [PATCH] Remove powerpc specific parts of 3c509 driver [PATCH] s2io: Switch to pci_get_device [PATCH] gt96100: move to pci_get_device API [PATCH] ehea: bugfix for register access functions [PATCH] e1000 disable device on PCI error drivers/net/phy/fixed: #if 0 some incomplete code drivers/net: const-ify ethtool_ops declarations [PATCH] ethtool: allow const ethtool_ops [PATCH] sky2: big endian [PATCH] sky2: fiber support [PATCH] sky2: tx pause bug fix drivers/net: Trim trailing whitespace [PATCH] ehea: IBM eHEA Ethernet Device Driver ... Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by commit 84fa7933a33f806bbbaae6775e87459b1ec584c0 that just happened to be next to unrelated changes in this update.
2006-09-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (353 commits) [IPV6] ADDRCONF: Mobile IPv6 Home Address support. [IPV6] ADDRCONF: Allow non-DAD'able addresses. [IPV6] NDISC: Fix is_router flag setting. [IPV6] ADDRCONF: Convert addrconf_lock to RCU. [IPV6] NDISC: Add proxy_ndp sysctl. [IPV6] NDISC: Set per-entry is_router flag in Proxy NA. [IPV6] NDISC: Avoid updating neighbor cache for proxied address in receiving NA. [IPV6]: Don't forward packets to proxied link-local address. [IPV6] NDISC: Handle NDP messages to proxied addresses. [NETFILTER]: PPTP conntrack: fix another GRE keymap leak [NETFILTER]: PPTP conntrack: fix GRE keymap leak [NETFILTER]: PPTP conntrack: fix PPTP_IN_CALL message types [NETFILTER]: PPTP conntrack: check call ID before changing state [NETFILTER]: PPTP conntrack: clean up debugging cruft [NETFILTER]: PPTP conntrack: consolidate header parsing [NETFILTER]: PPTP conntrack: consolidate header size checks [NETFILTER]: PPTP conntrack: simplify expectation handling [NETFILTER]: PPTP conntrack: remove unnecessary cid/pcid header pointers [NETFILTER]: PPTP conntrack: fix header definitions [NETFILTER]: PPTP conntrack: remove more dead code ...
2006-09-22[NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETEPatrick McHardy
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-21Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-09-21[netdrvr] mv643xx_eth: fix obvious typo, which caused build breakageJeff Garzik
The last minute fix submitted by the author fixed a bug, but broke the driver build. Noticed by Al Viro, since I can't build on said platform. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] mv643xx_eth: Unmap DMA buffers in receive pathDale Farnsworth
Fix a missing call to dma_unmap_single() in the receive path. Without this call, errors have been observed on non-cache-coherent systems. Signed-off-by Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-17[NET]: Clean up skb_linearizeHerbert Xu
The linearisation operation doesn't need to be super-optimised. So we can replace __skb_linearize with __pskb_pull_tail which does the same thing but is more general. Also, most users of skb_linearize end up testing whether the skb is linear or not so it helps to make skb_linearize do just that. Some callers of skb_linearize also use it to copy cloned data, so it's useful to have a new function skb_linearize_cow to copy the data if it's either non-linear or cloned. Last but not least, I've removed the gfp argument since nobody uses it anymore. If it's ever needed we can easily add it back. Misc bugs fixed by this patch: * via-velocity error handling (also, no SG => no frags) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-02[PATCH] mv643xx_eth: provide sysfs class device symlinkOlaf Hering
On Sat, Mar 11, Olaf Hering wrote: > Why is the /sys/class/net/eth0/device symlink not created for the > mv643xx_eth driver? Does this work for other platform device drivers? > Seems to work for the ps2 keyboard at least. The SET_NETDEV_DEV has to be done before a call to register_netdev. With the new patch below, the device symlink for the platform device was created. Unfortunately, after the 4 ls commands, the network connection died. No idea if the box crashed or if something else broke, lost remote access. Provide sysfs 'device' in /class/net/ethN Also, set module owner field, like pcnet32 driver does. Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] mv643xx_eth: Fix tx_timeout to only conditionally wake tx queueDale Farnsworth
After resetting the hardware on a tx_timeout, call netif_wake_queue() only if we have free tx descriptors. Also, attempt to recover if mv643xx_eth_start_xmit() is called when there are fewer free tx descriptors than expected. The BUG_ON() call we are replacing was hit on a tx_timeout that called netif_wake_queue(), indirectly via netif_device_attach(), even though we did not have enough free tx descriptors. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] mv643xx_eth: Always free completed tx descs on tx interruptBrent Cook
Fix the tx interrupt handler to free completed tx descriptors even when NAPI is enabled. Otherwise, the tx queue would fill up resulting in poor performance and "NETDEV WATCHDOG: <iface>: transmit timed out" messages. Signed-off-by: Brent Cook <bcook@bpointsys.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Remove non-working feature: task level rx queue refillDale Farnsworth
The task level rx queue refill feature hasn't ever worked (at least in 2.6) and is of dubious value. Remove it. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Clean up interrupt handlingDale Farnsworth
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Move #defines of constants to mv643xx_eth.hDale Farnsworth
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Refactor/clean up tx queue handlingDale Farnsworth
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Refactor tx command queuing codeDale Farnsworth
Simplify and remove redundant code for filling transmit descriptors. No changes in features; it's just a code reorganization/cleanup. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Rename "channels" to "queues"Dale Farnsworth
Use better terminology for HW queues. No functional changes. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Fix misplaced parenthesis in mv643xx_eth_port_disable_rxDale Farnsworth
This bug could result in a system hang. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] mv643xx_eth: Remove duplicate includes of linux/in.h and linux/ip.hDale Farnsworth
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-09Merge branch 'viro'Jeff Garzik
2006-02-07[PATCH] missing includes in drivers/net/mv643xx_eth.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-01-27[PATCH] mv643xx_eth: Clean up platform_data configurationDale Farnsworth
We shouldn't expose the hardware register contents in platform_data. The only things we allow the user to configure are autoneg, speed, and duplex. Add specific platform_data fields for these values and remove the registers configs. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] mv643xx_eth: use MII library for ethtool functionsJames Chapman
Use the common ethtool support functions of the MII library. Add generic MII ioctl handler. Add PHY parameter speed/duplex/negotiation initialization and modification. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] mv643xx_eth: use MII library for PHY managementJames Chapman
Modify link up/down handling to use the functions from the MII library. Note that I track link state using the MII PHY registers rather than the mv643xx chip's link state registers because I think it's cleaner to use the MII library code rather than writing local driver support code. It is also useful to make the actual MII registers available to the user with maskable kernel printk messages so the MII registers are being read anyway Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] mv643xx_eth: Make port queue enable/disable code consistentDale Farnsworth
Add and use the following functions: mv643xx_eth_port_enable_tx() mv643xx_eth_port_enable_rx() mv643xx_eth_port_disable_tx() mv643xx_eth_port_disable_rx() so that ports are enabled/disabled consistently. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] mv643xx_eth: Rename mp->tx_ring_skbs to mp->tx_desc_countDale Farnsworth
tx_ring_skbs is actually a count of tx descriptors currently in use. Since there may be multiple descriptors per skb, it is not the same as the number of skbs in the ring. Also change rx_ring_skbs to rx_desc_count to be consistent. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] mv643xx_eth: Merge unicast and multicast address filtering codeDale Farnsworth
Remove duplicated code by having unicast and multicast code use a common filter table function: eth_port_set_filter_table_entry(). Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>