aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2007-07-18Fix Vitesse RGMII-ID supportAndy Fleming
The Vitesse PHY on the 8641D needs to be set up with internal delay to work in RGMII mode. So we add skew when it is set to RGMII_ID mode. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Haruki Dai <Dai.Haruki@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2007-07-18Fix Vitesse 824x PHY interrupt ackingAndy Fleming
The Vitesse 824x PHY doesn't allow an interrupt to be cleared if the mask bit for that interrupt isn't set. This means that the PHY Lib's order of handling interrupts (disable, then clear) breaks on this PHY. However, clearing then disabling the interrupt opens up the code for a silly race condition. So rather than change the PHY Lib, we change the Vitesse driver so it always clears interrupts before disabling them. Further, the ack function only clears the interrupt if interrupts are enabled. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Haiying Wang <Haiying.Wang@freescale.com>
2007-07-10phylib: Add Marvell 88E1112 phy idOlof Johansson
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: cleanup marvell.c a bitOlof Johansson
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08phylib: m88e1111: enable SGMII modeKapil Juneja
If connected via SGMII, initialize with SGMII mode configured. Signed-off-by: Kapil Juneja <Kapil.Juneja@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08phylib: add the ICPlus IP175C PHY driverMichael Barkowski
The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition to a dedicated 100Mbit/s WAN port. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-28phy: Fix phy_id for Vitesse 824x PHYKumar Gala
The phy_id specified for the Vitesse 824x PHY would never match because it was expecting bits to be set that would be masked by the phy_id_mask. Fix the phy_id so it will match properly, and changed the mdio_bus_match to mask both the driver and devices phy_id with the mask so we dont have this issue in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-09phylib: add RGMII-ID mode to the Marvell m88e1111 PHY to fix broken ucc_gethKim Phillips
Support for configuring RGMII-ID (RGMII with internal delay) mode on the 88e1111 and 88e1145. Ucc_geth on MPC8360EMDS(the main user of ucc_geth) is broken after changed to use phylib. It is fixed by adding this internal delay. Also renamed 88e1111s -> 88e1111 (no references to an 88e1111s part were found), and fixed some whitespace. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24fix compiler warning in fixed.cDenver Gingerich
Correct the following compiler warning (and warnings resulting from the correction): warning: 'fixed_mdio_register_device' defined but not used Signed-off-by: Denver Gingerich <denver@ossguy.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11Add support for the Davicom DM9161A PHYKim Phillips
Distinguish between the Davicom DM9161A PHY and the DM9161E. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11Use menuconfig objects: PHYJan Engelhardt
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-10[S390] Kconfig: unwanted menus for s390.Martin Schwidefsky
Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-09unify flush_work/flush_work_keventd and rename it to cancel_work_syncOleg Nesterov
flush_work(wq, work) doesn't need the first parameter, we can use cwq->wq (this was possible from the very beginnig, I missed this). So we can unify flush_work_keventd and flush_work. Also, rename flush_work() to cancel_work_sync() and fix all callers. Perhaps this is not the best name, but "flush_work" is really bad. (akpm: this is why the earlier patches bypassed maintainers) Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Auke Kok <auke-jan.h.kok@intel.com>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09phy: use flush_work_keventd()Andrew Morton
(akpm: bypassed maintainers, sorry. There are other patches which depend on this) Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-28network: add the missing phy_device speed information to phy_mii_ioctlShan Lu
Function `phy_mii_ioctl' returns physical device's information based on user requests. When requested to return the basic mode control register information (BMCR), the original implementation only returns the physical device's duplex information and forgets to return speed information, which should not be because BMCR register is used to hold both duplex and speed information. The patch checks the BMCR value against speed-related flags and fills the return structure's speed field accordingly. Signed-off-by: Shan <shanlu@cs.uiuc.edu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28phy layer: add kernel-doc + DocBookRandy Dunlap
Convert function documentation in drivers/net/phy/ to kernel-doc and add it to DocBook. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27PHY: remove rwsem use from phy coreGreg Kroah-Hartman
The subsystem rwsem is not used by the driver core at all, so the use of it in the phy code doesn't make any sense. They might possibly want to use a local lock, but I am unsure about that. Cc: netdev <netdev@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17phylib: Add support for Marvell 88e1111S and 88e1145Andy Fleming
Changes include: * New support for 88e1145 * New support for 88e111s * Fixing 88e1101 driver to not match non-88e1101 PHYs * Increases in feature support across Marvell PHY product line * Fixes a bunch of whitespace issues found by Lindent Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Merge branch 'master' into upstreamJeff Garzik
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09phy devices: use same arg typesRandy Dunlap
sparse complains about differing types from prototype to definition, so change the u32 to phy_interface_t: drivers/net/phy/phy_device.c:140:19: error: symbol 'phy_connect' redeclared with different type (originally declared at include/linux/phy.h:362) - incompatible argument 5 (different signedness) drivers/net/phy/phy_device.c:190:19: error: symbol 'phy_attach' redeclared with different type (originally declared at include/linux/phy.h:360) - incompatible argument 4 (different signedness) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30FS_ENET: OF-related fixup for FEC and SCC MAC'sVitaly Bordug
Updated direct resource pass with ioremap call, make it grant proper IRQ mapping, stuff incompatible with the new approach were respectively put under #ifndef CONFIG_PPC_MERGE. It is required so that both ppc and powerpc could utilize fs_enet effectively. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-23PHY: Export phy ethtool helpersKumar Gala
We need to export phy_ethtool_gset and phy_ethtool_sset to allow drivers that use these functions to be built as modules. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-13[PATCH] Fix numerous kcalloc() calls, convert to kzalloc()Robert P. J. Day
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07Add "run_scheduled_work()" workqueue functionLinus Torvalds
This allows workqueue users to run just their own pending work, rather than wait for the whole workqueue to finish running. This solves the deadlock with networking libphy that was due to other workqueue entries possibly needing a lock that was held by the routine that wanted to flush its own work. It's not wonderful: if you absolutely need to synchronize with the work function having been executed, any user strictly speaking should have its own completion tracking logic, since when we run things explicitly by hand, the generic workqueue layer can no longer help us synchronize. Also, this is strictly only usable for work that has been scheduled without any delayed timers. You can not mix the new interface with schedule_delayed_work(). But it's better than what we had currently. Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-04Merge branch 'linux-2.6' into for-linusPaul Mackerras
2006-12-02[PATCH] PHY: Add support for configuring the PHY connection interfaceAndy Fleming
Most PHYs connect to an ethernet controller over a GMII or MII interface. However, a growing number are connected over different interfaces, such as RGMII or SGMII. The ethernet driver will tell the PHY what type of connection it is by setting it manually, or passing it in through phy_connect (or phy_attach). Changes include: * Updates to documentation * Updates to PHY Lib consumers * Changes to PHY Lib to add interface support * Some minor changes to whitespace in phy.h * gianfar driver now detects interface and passes appropriate value to PHY Lib Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02Revert "[PATCH] Add support for Marvell 88e1111S and 88e1145"Jeff Garzik
This reverts commit 477c517903d57047150b01608149e02c6e9d83dd. This patch depended on something that was not yet committed.
2006-12-02[PATCH] Add support for Marvell 88e1111S and 88e1145Andy Fleming
This patch requires the new support for configurable PHY interfaces. Changes include: * New support for 88e1145 * New support for 88e111s * Fixing 88e1101 driver to not match non-88e1101 PHYs * Increases in feature support across Marvell PHY product line * Fixes a bunch of whitespace issues found by Lindent Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Fixed a number of bugs in the PHY LayerAndy Fleming
* genphy_update_link is now exported * Added a fix from ncase@xes-inc.com which changes forcing so it only updates the link. Otherwise, it never tries the lower values, since it is always overwriting the speed/duplex values with the current ones, rather than the intended ones. * Fixed a bug where bringing up a PHY with no link caused it to timeout, and enter forcing mode. Once in forcing mode, plugging in the link didn't autonegotiate. Now the AN state detects the lack of link, and enters the NO_LINK state. AN only times out if the link is up and AN fails * Cleaned up the PHY_AN case, reducing one level of indentation for the timeout code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 2.6.18: sb1250-mac: Phylib IRQ handling fixesMaciej W. Rozycki
This patch fixes a couple of problems discovered with interrupt handling in the phylib core, namely: 1. The driver uses timer and workqueue calls, but does not include <linux/timer.h> nor <linux/workqueue.h>. 2. The driver uses schedule_work() for handling interrupts, but does not make sure any pending work scheduled thus has been completed before driver's structures get freed from memory. This is especially important as interrupts may keep arriving if the line is shared with another PHY. The solution is to ignore phy_interrupt() calls if the reported device has already been halted and calling flush_scheduled_work() from phy_stop_interrupts() (but guarded with current_is_keventd() in case the function has been called through keventd from the MAC device's close call to avoid a deadlock on the netlink lock). Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-phy-irq-16 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 2.6.18: sb1250-mac: Broadcom PHY supportMaciej W. Rozycki
This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30Fix misc Kconfig typosMatt LaPlante
Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-13[PATCH] Slight refactor of interrupt mapping for FSL partsAndy Fleming
* Cleaned up interrupt mapping a little by adding a helper function which parses the irq out of the device-tree, and puts it into a resource. * Changed the arch/ppc platform files to specify PHY_POLL, instead of -1 * Changed the fixed phy to use PHY_IGNORE_INTERRUPT * Added ethtool.h and mii.h to phy.h includes Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-01[netdrvr] phy: Fix bugs in error handlingJeff Garzik
The recent __must_check stuff flagged some error handling bugs. phy/fixed.c: * handle device_bind_driver() failure phy/phy_device.c: * handle device_bind_driver() failure * release rwsem upon failure Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-25[PATCH] Signedness issue in drivers/net/phy/phy_device.cEric Sesterhenn
While checking gcc 4.1 -Wextra warnings, I stumbled across the following two warnings: drivers/net/phy/phy_device.c:528: warning: comparison of unsigned expression < 0 is always false drivers/net/phy/phy_device.c:546: warning: comparison of unsigned expression < 0 is always false Since phy_read() returns an integer and can return negative values, it seems to me the best way to get proper error handling working again is to make val an int. Currently it is an u32, so the < 0 check always fails. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net/phy/fixed: #if 0 some incomplete codeJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-19[PATCH] PAL: Support of the fixed PHYVitaly Bordug
This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14[PATCH] remove unnecessary config.h includes from drivers/net/Dave Jones
config.h is automatically included by kbuild these days. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] Stop calling phy_stop_interrupts() twiceSergei Shtylylov
Prevent phylib from freeing PHY IRQ twice on closing an eth device: phy_disconnect() first calls phy_stop_interrupts(), then it calls phy_stop_machine() which in turn calls phy_stop_interrupts() making the kernel complain on each bootup... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] Add support for the Cicada 8201 PHYKim Phillips
Add support for the Cicada 8201 PHY, a.k.a Vitesse VSC8201. This PHY is present on the MPC8349mITX. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26[PATCH] Fix phy id for LXT971A/LXT972AUwe Zeisberger
From: Uwe Zeisberger <Uwe_Zeisberger@digi.com> The phy ids used are taken from an driver that used a right shift of 4 to chop off the revision number. This driver does not shift, so the id and mask values are wrong and must be left shifted by 4 to actually detect the chips. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Acked-by: Andy Fleming <afleming@freescale.com> [akpm: this is a previously-nacked patch, but the problem is real] Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>