aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/qla3xxx.c
AgeCommit message (Collapse)Author
2008-01-28qla3xxx annotationsAl Viro
stop the byteswap-in-place, annotate Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-08[NET]: Do not check netif_running() and carrier state in ->poll()David S. Miller
Drivers do this to try to break out of the ->poll()'ing loop when the device is being brought administratively down. Now that we have a napi_disable() "pending" state we are going to solve that problem generically. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-10qla3xxx: bugfix: Fix bad logical operation in link state machine.Ron Mercer
Luckily, this wasn't reported or reproduced. The logical operation for setting duplex had wrong grouping. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10qla3xxx: bugfix: Move link state machine into a worker threadRon Mercer
The link state machine requires access to some resources that are shared with the iSCSI function on the chip. (See iSCSI driver at drivers/scsi/qla4xxx) If the interface is being up/downed at a rapid pace this driver may need to sleep waiting to get access to the common resources. For this we are moving the state machine to run as a work thread. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/qla3xxx: trim trailing whitespaceJeff Garzik
Also, hopefully, change the file permissions to 0644. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-10[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik
These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET] drivers/net: statistics cleanup #1 -- save memory and shrink codeJeff Garzik
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10Clean up duplicate includes in drivers/net/Jesper Juhl
This patch cleans up duplicate includes in drivers/net/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-02qla3xxx: bugfix: Fix VLAN rx completion handling.Ron Mercer
Fix 4032 chip undocumented "feature" where bit-8 is set if the inbound completion is for a VLAN. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02qla3xxx: bugfix: Add memory barrier before accessing rx completion.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-31[NET]: ethtool_perm_addr only has one implementationMatthew Wilcox
All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-08qla3xxx: cleanup checksum offload codeStephen Hemminger
The code for checksum is more complex than needed when dealing with VLAN's; the higher layers already pass down the location of the IP header. Compile tested only, no hardware available. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03qla3xxx: device doesnt do hardware checksumming.Stephen Hemminger
Reading the code for ql_hw_csum_setup(), it is obvious that this driver is broken for IPV6. The driver sets the NETIF_F_HW_SUM flag, but the code for checksum setup only deals with IPV4. Compile tested only, no hardware available. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28make drivers/net/qla3xxx.c:PHY_DEVICES[] staticAdrian Bunk
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote: >... > Changes since 2.6.21-rc5-mm2: >... > git-netdev-all.patch >... > git trees >... This patch makes the needlessly global PHY_DEVICES[] static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28qla3xxx: Bumping driver version number to v2.03.00-k4Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28qla3xxx: Adding support for the Agere PHY (ET1011C)Ron Mercer
This PHY support patch was written by Benjamin Li. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28qla3xxx: Add ethtool get_pauseparam for improved bonding support.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28drivers/net/qla3xxx.c: make 2 functions staticAdrian Bunk
This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-28qla3xxx: bugfix: Jumbo frame handling.Ron Mercer
Fixed rx checksum bits. Turn on TCP processing for rx checksum. Fixed max frame length register write. It wasn't getting set in multi-port system. Set rx buffer queue length properly for jumbo frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Dropping interrupt under heavy network load.Ron Mercer
Update the rx queue pointer when exiting NAPI poll rather than at the end of each iteration. Remove unnecessary PCI flushes that occurred after every write. Now write all regs and flush once. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Multi segment sends were getting whacked.Ron Mercer
The proper header length was not being used. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Add tx control block memset.Ron Mercer
This was removed in a previous patch to increase performance, but caused a transmit error for the 4032 chip. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02qla3xxx: bugfix for line omitted in previous patch.Ron Mercer
This missing line caused transmit errors on the Qlogic 4032 chip. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Bumping driver version numberBenjamin Li
Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Kernic Panic on pSeries under stress conditionsBenjamin Li
To reproduce this panic consistently, we run an intensive network application like 'netperf'. After waiting for a couple of seconds, you will see a stack trace and a kernel panic where we are calling pci_unmap_single() in ql_poll(). Changes: 1) Check the flags on the Response MAC IO Control block to check for errors 2) Ensure that if we are on the 4022 we only use one segment 3) Before, we were reading the memory mapped producer index register everytime we iterated in the loop when clearing the queue. We should only be iterating to a known point, not as the producer index is being updated. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: bugfix tx reset after stress conditions.Ron Mercer
To Reproduce the Problem: To reproduce this panic consistently, we run an intensive network application like 'netperf' and then switch to a different console. After waiting for a couple of seconds, you will see a tx reset has occured. Reason: We enable interrupts even if we were not running. Solution: Now we will enable interrupts only after we are ready to give up the poll routine. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Check return code from pci_map_single() in ↵Benjamin Li
ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() pci_map_single() could fail. We need to properly check the return code from pci_map_single(). If we can not properly map this address, then we should cleanup and return the proper return code. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: bugfix: Fixed jumbo frame handling for 3032 chip.Ron Mercer
The scatter/gather lists were not being build correctly. When large frames spanned several buffers the chip would panic. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Clean up receive process.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Dynamically size the rx buffer queue based on the MTU.Ron Mercer
This change removes use of constants for rx buffer queue size and instead calculates the queue length based on what he MTU is set to. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Remove API to change MTU.Ron Mercer
This network device driver shares the same hardware as the qla4xxx iSCSI driver. Changing the MTU via the device interface will cause qla4xxx to crash as there is no way to make notification. Users wishing to change the MTU must do so using an iSCSI utility such as Qlogic SanSurfer. This forces the user to unload/reload this network device driver after the MTU value has been changed in flash. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Fix deadlock issue on error pathsBenjamin Li
1) Fix deadlock issue when in QL_RESET_ACTIVE state and traversing through the Link State Machine 2) Fix deadlock issue when ethtool would call ql_get_settings() 3) Fix deadlock issue when adaptor is ifup'ed but adaptor fails to initialize Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Changed to use netdev_alloc_skb() from dev_alloc_skbBenjamin Li
Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Remove unnecessary memset() in qla3xxx_send()Benjamin Li
We do not need to zero out the 64 byte MAC request I/O control block. By zeroing out the control block and setting it to proper fields is redundant work. This is because in the qla3xxx_send() function we will already set the proper fields in this structure. The unused fields are not looked at by the hardware and do not need to be zeroed out. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Return proper error codes when the 4022/4032 is being probedBenjamin Li
The return code was not properly set when when allocating memory or mapping memory failed. Depending on the stack, the return code would sometimes return 0, which indicates everything was ok, when in fact there was an error. This would cause trouble when the module was removed. Now, we will pass back the proper return code when an error occurs during the PCI probe. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-05qla3xxx: Add support for Qlogic 4032 chip.Ron Mercer
Qlogic 4032 chip is an incremental change from the 4022. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-07qla3xxx: Add delay to NVRAM register access.Ron Mercer
When accessing the 93LC86 serial prom the clock high and low times must be at least 250ns each. We have seen on some systems where the access times were much lower casing bit errors. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-07qla3xxx: Remove NETIF_F_LLTX from driver features.Ron Mercer
Driver TX locking was removed some time ago, but the flag was overlooked. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-24[PATCH] wrong thing iounmapped (qla3xxx)Al Viro
ql3xxx_probe() does ioremap and stores result in ->mem_map_registers. On failure exit it does iounmap() of the same thing. OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is (a) never assigned and (b) never used other than in that iounmap() call. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] qla3xxx iomem annotationsAl Viro
the driver is still shite, though... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13drivers/net: const-ify ethtool_ops declarationsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>