aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/qlge/qlge_main.c
AgeCommit message (Collapse)Author
2009-02-24qlge: Use one path to (re)fill rx buffers.Ron Mercer
Currently there are two paths for filling rx buffer queues. One is used during initialization and the other during runtime. This patch removes ql_alloc_sbq_buffers() and ql_alloc_lbq_buffers() and replaces them with a call to the runtime functions ql_update_lbq() and ql_update_sbq(). Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Optimize rx buffer refill process.Ron Mercer
RX Buffers are refilled in chunks of 16 at a time before notifying the hardware with a register write. This can cause several writes to take place in a given napi poll call. This change causes the write to take place only once at the end of the call. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Change frame route hw semaphore granularity.Ron Mercer
Instead of taking/giving the hw semaphore repeatedly when iterating over several frame to queue route settings, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Increase MAC addr hw sem granularity.Ron Mercer
Instead of taking/giving the semaphore repeatedly when iterating over several adderesses, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Clean up mac address and frame route settings.Ron Mercer
Setting MAC addresses and routing frames to various queues will need to be done in response to firmware events as well as during initialization. This change encapsulates the facilities into a single call that can later me made from other places. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-02-12qlge: bugfix: Add missing rx buf clean index on early exit.Ron Mercer
The large receive buffer queue is not properly tracking the current index in the case where an early exit occurs. This can happen when a page alloc or dma mapping fails. If this occurs the queue will get out of sync and invalid indexes can be written to the hardware. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix RX scaling values.Ron Mercer
Receive packets were only scaling across 2 of the receive queues. The value was hardcoded to 2 instead of being based on how many rx queues were running. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix TSO breakage.Ron Mercer
Moved the buffer mapping to a point after TSO logic has modified the iph->check field. We were seeing stale data on the PCIe bus. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing dev_kfree_skb_any() call.Ron Mercer
We put the skb back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing put_page() call.Ron Mercer
We put the page back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix fatal error recovery hang.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb().Ron Mercer
Replace calls to vlan_hwaccel_rx() and netif_rx(). Thanks to Dave Miller for pointing out the the driver was making the wrong upcall for passing packets into the stack. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/Kconfig
2009-02-02qlge: bugfix: Add missing netif_napi_del call.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02qlge: bugfix: Add flash offset for second port.Ron Mercer
Without this the 2nd port gets first ports MAC addr. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02qlge: bugfix: Fix endian issue when reading flash.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27net: Add skb_record_rx_queue() calls to multiqueue capable drivers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Remove dynamic alloc of rx ring control blocks.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Fix schedule while atomic issue.Ron Mercer
There is no need to sleep while waiting for the hardware semaphore to become available. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Remove support for device ID 8000.Ron Mercer
Support for dev id 8000 is pushed out until 2.6.30. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Get rid of split addresses in hardware control blocks.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Get rid of volatile usage for shadow register.Ron Mercer
Putting back ql_read_sh_reg() function and using rmb() instead of volatile. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qlge: Naming interrupt vectorsJesper Dangaard Brouer
Name interrupt vectors according to the new naming standard, by Robert Olsson and DaveM. The qlge driver were very close to the new standard, thus the change is kind of trivial. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05qlge: Fix sparse warning regarding rx buffer queues.Ron Mercer
Warnings: drivers/net/qlge/qlge_main.c:909:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:909:17: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:909:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:911:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:911:17: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:911:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:974:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:974:17: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:974:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:975:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:975:17: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:975:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2132:16: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2132:16: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:2132:16: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2133:16: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2133:16: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:2133:16: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2212:15: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2212:15: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:2212:15: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2214:15: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2214:15: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:2214:15: got restricted unsigned int [usertype] <noident> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05qlge: Fix sparse endian warning in ql_hw_csum_setup().Ron Mercer
Changed u16 to __sum16 usage. Warnings: drivers/net/qlge/qlge_main.c:1897:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1897:9: expected unsigned short [usertype] *check drivers/net/qlge/qlge_main.c:1897:9: got restricted unsigned short *<noident> drivers/net/qlge/qlge_main.c:1903:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1903:9: expected unsigned short [usertype] *check drivers/net/qlge/qlge_main.c:1903:9: got restricted unsigned short *<noident> drivers/net/qlge/qlge_main.c:1909:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1909:9: expected unsigned short [unsigned] [short] [usertype] <noident> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Fix register access error checking.Ron Mercer
Some indexed registers do not have error bits. In these cases a value of zero should be used for error checking. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Fix ring length setting for rx ring, large/smallRon Mercer
The length field for these rings is 16-bits. If the length is the max supported 65536 then the setting should be zero. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Fix shadow register endian issue.Ron Mercer
Shadow registers are consistent memory locations to which the chip echos ring indexes in little endian format. These values need to be endian swapped before referencing. Note: The register pointer declaration uses the volatile modifier which causes warnings in checkpatch. Per Documentation/volatile-considered-harmful.txt: - Pointers to data structures in coherent memory which might be modified by I/O devices can, sometimes, legitimately be volatile. A ring buffer used by a network adapter, where that adapter changes pointers to indicate which descriptors have been processed, is an example of this type of situation. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Add missing pci_unmap_page call in receive path.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Add missing pci_mapping_err checking.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26net: Fix warning fallout from recent NAPI interface changes.David S. Miller
When we removed the network device argument from several NAPI interfaces in 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-25qlge: ql_adapter_down() typoRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21qlge: fix sparse warningsStephen Hemminger
Fix sparse warnings and one bug: * Several routines can be static * Don't lose __iomem annotation * fix locking on error path (bug) Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21qlge: convert to net_device_opsStephen Hemminger
Convert driver to new net_device_ops. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert more to %pMJohannes Berg
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-22qlge: Fix MSI/legacy single interrupt bug.Ron Mercer
The chip can issue spurious interrupts for single interrupt modes. We use disable to clear the condition and allow processing to continue. Also got rid of legacy specific code since it now needs to be done on MSI single irq also. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-13net: fix driver build errors due to missing net/ip6_checksum.h includeKamalesh Babulal
2.6.27-git2 kernel build fails with allyesconfig on powerpc with build error <introduced by commit 01f2e4ead2c51226ed1283ef6a8388ca6f4cff8f> CC drivers/net/enic/enic_main.o drivers/net/enic/enic_main.c: In function ‘enic_queue_wq_skb_tso’: drivers/net/enic/enic_main.c:576: error: implicit declaration of function ‘csum_ipv6_magic’ make[3]: *** [drivers/net/enic/enic_main.o] Error 1 <introduced by commit c4e84bde1d595d857d3c74b49b9c45cc770df792> drivers/net/qlge/qlge_main.c: In function ‘ql_tso’: drivers/net/qlge/qlge_main.c:1862: error: implicit declaration of function ‘csum_ipv6_magic’ make[3]: *** [drivers/net/qlge/qlge_main.o] Error 1 <introduced by commit 95252236e73e789dd186ce796a2abc60b3a61ebe> drivers/net/jme.c: In function ‘jme_tx_tso’: drivers/net/jme.c:1784: error: implicit declaration of function ‘csum_ipv6_magic’ make[2]: *** [drivers/net/jme.o] Error 1 Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-12qlge: remove duplicated #includeHuang Weiyi
Removed duplicated include <linux/init.h> in files below drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19qlge: Protect qlge_resume() with CONFIG_PMDavid S. Miller
Fixes the following build warning: drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18qlge: New Qlogic 10Gb Ethernet Driver.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-14 08:24:08 +0000