aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/qlge
AgeCommit message (Collapse)Author
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02glge: remove unused #include <version.h>Huang Weiyi
Remove unused #include <version.h> in drivers/net/qlge/qlge_ethtool. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/igb/igb_main.c drivers/net/qlge/qlge_main.c drivers/net/wireless/ath9k/ath9k.h drivers/net/wireless/ath9k/core.h drivers/net/wireless/ath9k/hw.c
2009-03-13qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer
With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer
Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Tell hw to strip vlan header.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13qlge: bugfix: Increase filter on inbound csum.Ron Mercer
Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Fix endian issue related to rx buffers.Ron Mercer
This was introduced in an earlier net-next patch. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Pad outbound frames smaller than 60 bytes.Ron Mercer
With some asic configurations xmit of frames smaller than 60 bytes may fail. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Move netif_napi_del() to common call point.Ron Mercer
Moving netif_napi_del() up the call chain so it will get called from all exit points. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Remove spinlock from asic init path.Ron Mercer
There is nothing to contend with it. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Clear shadow registers before use.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Get rid of irqsave/restore in intr disable.Ron Mercer
The completion interrupt disable routine is only called from the ISR, so there is no need for irqsave/restore. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: bugfix: Tell hw to strip vlan header.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Add tx multiqueue support.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Add support for GRO.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Increase filtering for inbound csum settings.Ron Mercer
Chip does not do UDP checksum when fragmentation occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Remove debug junk from asic reset logic.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10qlge: Move reset logic into asic_reset_worker func.Ron Mercer
Get rid of extraneous ql_cycle_adapter. It's only called from the one place. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Add support for lost firmware events.Ron Mercer
When the firmware is issuing events to the driver the events must be removed from the queue. If the queue overflows, the firmware will build and special event that captures those that are lost. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Save status from firmware crash (system err).Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Improve handling for firmware init failure.Ron Mercer
This event will arrive at boot time or after an MPI processor reset if the firmware failed to initialize. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Clean up event handler for firmware init.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Add worker-handler for firmware events.Ron Mercer
This worker and it's supporting routines are used for IDC 'inter-device-communication' events that require an ACK mailbox command be sent to allow completion of the request. These requests are originated by another function wanting to change some common port paramters. Typical example would be: 1) Change max TX/RX frame size allowed. 2) Change pause parameters. 3) Change loopback mode. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Clean up link up processing.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Clean up link down processing.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03qlge: Add firmware support for insert/remove SFP.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02qlge: Add support for getting/setting port config.Ron Mercer
This patch adds functionality to get and set port parameters. Currently it is used to set maximum TX/RX frame sizes. This process is also capable of setting: 1) Pause type: Standard or Priority based. 2) Loop back mode. 3) Enable Jumbo frame mode (included here...) Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02qlge: Add support for device ID 8000.Ron Mercer
This device has more firmware support for link management, setting TX and RX maximum frame sizes. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02qlge: Add support for firmware mailbox commands.Ron Mercer
This interface will be used for setting things like maximum frame size, setting WOL, and ACKing changes requested by the FCOE function. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26qlge: Reduce debug print output.Ron Mercer
Get rid of some noise that is for debug only. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26qlge: Prepare to add new device.Ron Mercer
This organizes a few calls into a function table to enable adding new devices. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26qlge: Move firmware event handler.Ron Mercer
This is not a logical change but rather a move of the inbound firmware event handler into it's own function as it will later be called by the outbound path. The addition of the mutex is to create exclusive access to the mailbox commands between inbound and outbound handling. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26qlge: Clean up firmware reset path.Ron Mercer
Add function for performing the reset rather than in-line. This function may later be called by a core dump process. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26qlge: Add defines for firmware support.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Use one path to (re)fill rx buffers.Ron Mercer
Currently there are two paths for filling rx buffer queues. One is used during initialization and the other during runtime. This patch removes ql_alloc_sbq_buffers() and ql_alloc_lbq_buffers() and replaces them with a call to the runtime functions ql_update_lbq() and ql_update_sbq(). Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Optimize rx buffer refill process.Ron Mercer
RX Buffers are refilled in chunks of 16 at a time before notifying the hardware with a register write. This can cause several writes to take place in a given napi poll call. This change causes the write to take place only once at the end of the call. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Change frame route hw semaphore granularity.Ron Mercer
Instead of taking/giving the hw semaphore repeatedly when iterating over several frame to queue route settings, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Increase MAC addr hw sem granularity.Ron Mercer
Instead of taking/giving the semaphore repeatedly when iterating over several adderesses, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24qlge: Clean up mac address and frame route settings.Ron Mercer
Setting MAC addresses and routing frames to various queues will need to be done in response to firmware events as well as during initialization. This change encapsulates the facilities into a single call that can later me made from other places. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-02-12qlge: bugfix: Add missing rx buf clean index on early exit.Ron Mercer
The large receive buffer queue is not properly tracking the current index in the case where an early exit occurs. This can happen when a page alloc or dma mapping fails. If this occurs the queue will get out of sync and invalid indexes can be written to the hardware. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix RX scaling values.Ron Mercer
Receive packets were only scaling across 2 of the receive queues. The value was hardcoded to 2 instead of being based on how many rx queues were running. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix TSO breakage.Ron Mercer
Moved the buffer mapping to a point after TSO logic has modified the iph->check field. We were seeing stale data on the PCIe bus. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing dev_kfree_skb_any() call.Ron Mercer
We put the skb back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing put_page() call.Ron Mercer
We put the page back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix fatal error recovery hang.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb().Ron Mercer
Replace calls to vlan_hwaccel_rx() and netif_rx(). Thanks to Dave Miller for pointing out the the driver was making the wrong upcall for passing packets into the stack. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/Kconfig