aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/Kconfig
AgeCommit message (Collapse)Author
2006-10-03Fix several typos in drivers/Matt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-08-29[PATCH] ipw2200: always enable frequently used debugging codeZhu Yi
Moving part of the debugging code from IPW_DEBUG to IPW_LL_DEBUG (low level debugging) and make IPW_DEBUG be always enabled. IPW_LL_DEBUG still needs to be enabled by selecting CONFIG_IPW2200_DEBUG. But it is highly deprecated for normal users since it adds higher debug verbosity in driver hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] airo: should select crypto_aesRobert Schulze
The driver airo (for Cisco Wlan-Cards) complains about "failed to load transform for AES", when it is loaded and CRYPTO_AES is not selected in Kconfig. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] ZyDAS ZD1211 USB-WLAN driverDaniel Drake
There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05[PATCH] wireless: move zd1201 where it belongsPavel Machek
zd1201 is wifi adapter, yet it is hiding in drivers/usb/net where noone can find it. This moves Kconfig/Makefile zd1201 to the right place. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] wireless Kconfig add IPW2200_RADIOTAPZhu Yi
Makefile both IPW2200_RADIOTAP and IPW2200_PROMISCUOUS depend on IPW2200_MONITOR. Let IPW2200_PROMISCUOUS select IPW2200_RADIOTAP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] ipw2200: rename CONFIG_IPW_QOS to CONFIG_IPW2200_QOSZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associatedZhu Yi
With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] Revert NET_RADIO Kconfig title changeJean Tourrilhes
2.6.17-rc1 changed the title for the entry CONFIG_NET_RADIO. I personally disagree with this change and want it reverted. Patch for 2.6.17-rc1. Rationale : WIRELESS_EXT is an invisible option. Therefore, the only way for a user to enable it is via NET_RADIO. Some users need to do that for out-of-tree drivers. Therefore it should be mentionned in the title of the option. Rationale2 : the option just below is called "Wireless Extension API over RtNetlink". Some users may confuse this option for the main "Wireless Extension" option. Therefore reverting this change help disambiguate the relation between those two options. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-31[PATCH] uml: kconfigsAl Viro
kconfig sanitized around drivers/net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] PCMCIA_SPECTRUM must select FW_LOADERAdrian Bunk
PCMCIA_SPECTRUM must select FW_LOADER. Reported by "Alexander E. Patrakov" <patrakov@ums.usu.ru>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] Apple Airport: Add Kconfig note that the bcm43xx driver has to be ↵Michael Buesch
used for Airport Extreme cards. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Partially fix PIO code. Add Kconfig option for PIO or DMA ↵Michael Buesch
mode (or both). Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add DEBUG Kconfig option. Also fix indention.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: patch Kconfig and wireless/Makefile for importJohn W. Linville
Patch Kconfig and wireless/Makefile to merge bcm43xx 'properly' Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-24[WIRELESS]: Fix config dependencies.Dave Jones
I accidentally ended up with a config that set NET_RADIO off, and NET_WIRELESS_RTNETLINK on, which blew up thus.. net/built-in.o: In function `do_setlink':net/core/rtnetlink.c:479: undefined reference to `wireless_rtnetlink_set' net/built-in.o: In function `do_getlink':net/core/rtnetlink.c:521: undefined reference to `wireless_rtnetlink_get' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23[PATCH] WE-20 for kernel 2.6.16Jean Tourrilhes
This is version 20 of the Wireless Extensions. This is the completion of the RtNetlink work I started early 2004, it enables the full Wireless Extension API over RtNetlink. Few comments on the patch : o totally driver transparent, no change in drivers needed. o iwevent were already RtNetlink based since they were created (around 2.5.7). This adds all the regular SET and GET requests over RtNetlink, using the exact same mechanism and data format as iwevents. o This is a Kconfig option, as currently most people have no need for it. Surprisingly, patch is actually small and well encapsulated. o Tested on SMP, attention as been paid to make it 64 bits clean. o Code do probably too many checks and could be further optimised, but better safe than sorry. o RtNetlink based version of the Wireless Tools available on my web page for people inclined to try out this stuff. I would also like to thank Alexey Kuznetsov for his helpful suggestions to make this patch better. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] trivial: fix spelling errors in KconfigsJon Mason
This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] ipw2200: add monitor and qos entries to KconfigAndreas Happe
I have made a stupid copy&paste error: QoS option is named IPW_QOS not IPW2200_MONITOR. Spotted by Daniel Paschka, thanks. Add the following config entries for the ipw2200 driver to drivers/net/wireless/Kconfig * IPW2200_MONITOR enables Monitor mode * IPW_QOS enables QoS feature - this is under development right now, so it depends upon EXPERIMENTAL Signed-off-by: Andreas Happe <andreashappe@snikt.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] let IPW2{1,2}00 select IEEE80211Jan Niehusmann
This patch makes the IPW2100 and IPW2200 options available in the configuration menu even if IEEE80211 has not been selected before. This behaviour is more intuitive for people which are not familiar with the driver internals. The suggestion for this change was made by Alejandro Bonilla Beeche. Signed-off-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17Merge branch 'upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-02-10[PATCH] wrong firmware location in IPW2100 Kconfig entryJesper Juhl
Firmware should go into /lib/firmware, not /etc/firmware. Found by Alejandro Bonilla. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-30[PATCH] AIRO{,_CS} <-> CRYPTO fixesAdrian Bunk
CRYPTO is a helper variable, and to make it easier for users, it should therefore select'ed and not be listed in the dependencies. drivers/net/wireless/airo.c requires CONFIG_CRYPTO for compilations. Therefore, AIRO_CS also has to CRYPTO. Additionally, this patch removes the #ifdef's for the non-compiling CRYPTO=n case from drivers/net/wireless/airo.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30[PATCH] net/: fix the WIRELESS_EXT abuseAdrian Bunk
This patch contains the following changes: - add a CONFIG_WIRELESS_EXT select'ed by NET_RADIO for conditional code - remove the now no longer required #ifdef CONFIG_NET_RADIO from some #include's Based on a patch by Jean Tourrilhes <jt@hpl.hp.com>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-15drivers/net/{,wireless/}Kconfig: remove dead URLAdrian Bunk
shadow.cabi.net does no longer exist. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-15Spelling fix in IPW2100 and IPW2200 Kconfig entriesAlex Shepard
s/remvoed/removed/ Signed-off-by: Alex Shepard <ashepard@u.washington.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-12[PATCH] CONFIG_AIRO needs CONFIG_CRYPTOdann frazier
airo.c currently has MICSUPPORT enabled, which requires CONFIG_CRYPTO. A user reported a build failure which is due to the lack of a Kconfig dependency. See http://bugs.debian.org/344205. This patch makes Kconfig enforce this dependency. Signed-off-by: dann frazier <dannf@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] Duplicate IPW_DEBUG option for ipw2100 and 2200Brice Goglin
There are currently two IPW_DEBUG options in drivers/net/wireless/Kconfig (one for ipw2100 and one for ipw2200). The attached patch splits it into IPW2100_DEBUG and IPW2200_DEBUG. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Cc: "James P. Ketrenos" <ipw2100-admin@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ipw2200: kzalloc conversion and Kconfig dependency fixTakis
- Use kzalloc for IPW2200 - Fix config dependency for IPW2200 Signed-off-by: Panagiotis Issaris <takis@issaris.org> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Yi Zhu <yi.zhu@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] Atmel wireless updatesimon@thekelleys.org.uk
* Merge PCMCIA card table with new Brodowski PCMCIA id table. * Add missing entries to PCMCIA id table. * Other tweaks to conform with Documentation/driver-changes.txt (types, call request_region, etc) * Fix size of requested IO region. * Reduce printk verbosity. * Remove EXPERIMENTAL * tweak to association code - don't force shared key authentication when wep in use. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-14[PATCH] wireless/airo: Build fixMatteo Croce
The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: Matteo Croce <3297627799@wind.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] orinoco: New driver - spectrum_cs.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dee4f325520d4ea29397dd67ca657b7235bb1790 (from c88faac230cc9775445e5c644991c352e35c72a1) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 17:46:39 2005 -0400 New driver - spectrum_cs. Driver for 802.11b cards using RAM-loadable Symbol firmware, such as Symbol Wireless Networker LA4100, CompactFlash cards by Socket Communications and Intel PRO/Wireless 2011B. The driver implements Symbol firmware download. The rest is handled in hermes.c and orinoco.c. Utilities for downloading the Symbol firmware are available at http://sourceforge.net/projects/orinoco/ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: New driver - orinoco_nortel.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dce61aef99ceb57370b70222dc34d788666c0ac3 (from ceb6695092be8dcdfe2dec6ee5097d613011489d) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 15:50:55 2005 -0400 New driver - orinoco_nortel. This is a driver for Nortel emobility PCI adaptors, which consist of an Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The driver initializes the device and uses Orinoco core driver for actual wireless networking. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and ↵Pavel Roskin
PCI_HERMES. Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree ceb6695092be8dcdfe2dec6ee5097d613011489d (from 6b39374a27eb4be7e9d82145ae270ba02ea90dc8) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 14:50:10 2005 -0400 Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES. Those drivers have been used for a long time, and there have been very few problem reports. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25/spare/repo/netdev-2.6 branch 'ieee80211'Jeff Garzik
2005-08-25ipw2100: Fix incorrectly named config option.Jiri Benc
Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Jirka Bohac <jbohac@suse.cz>
2005-08-24/spare/repo/netdev-2.6 branch 'ieee80211'Jeff Garzik
2005-08-24Merge upstream into ieee80211.Jeff Garzik
Hand-fix merge conflict in drivers/usb/net/zd1201.c.
2005-08-23[PATCH] Kconfig fix (airo_cs on m32r)Al Viro
airo_cs is broken on m32r; marked as such. [Proper fix would involve separating PCI-dependent parts and making sure they don't get in the way _and_ arranging for asm/scatterlist.h getting picked on m32r] Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27Merge /spare/repo/netdev-2.6 branch 'ieee80211'Jeff Garzik
2005-06-27[PATCH] ieee80211: fix recursive ipw2200 dependenciesAdrian Bunk
This results in recursive dependencies: - IPW2200 depends on NET_RADIO - IPW2200 selects IEEE80211 - IEEE80211 selects NET_RADIO This patch fixes the IPW2200 dependencies in a way that they are similar to the IPW2100 dependencies. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jiri Benc <jbenc@suse.cz>
2005-05-27Automatic merge of /spare/repo/netdev-2.6 branch we18-ieee80211
2005-05-27Automatic merge of /spare/repo/netdev-2.6 branch we18
2005-05-27Automatic merge of /spare/repo/netdev-2.6 branch we18-ieee80211
2005-05-27Add ipw2200 wireless driver.James Ketrenos
2005-05-27Add ipw2100 wireless driver.James Ketrenos
2005-05-16[PATCH] wireless: 3CRWE154G72 Kconfig help fixDaniel Andersen
Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not supported by the prism54 project. To stop confusion, the kernel documentation should state so as 3com made a good job hiding the version. Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig
2005-05-12Add HostAP wireless driver.Jouni Malinen
Includes minor cleanups from Adrian Bunk <bunk@stusta.de>.
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!