aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/hw.c
AgeCommit message (Collapse)Author
2009-09-09ath9k: Disable ASPM when btcoex is activeVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08ath9k: Fix RX Filter handling for BARSujith
BAR frames have to be sent to mac80211 only if the current channel is HT. Also, move the macro to enum ath9k_rx_filter. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31ath9k: Do an AHB reset before doing RTC resetVasanthakumar Thiagarajan
Doing an RTC reset when DMA is active may corrupt memory, make sure no DMA is active at this moment by doing an AHB reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Add Bluetooth Coexistence 3-wire supportVasanthakumar Thiagarajan
This patch adds 3-wire bluetooth coex support for AR9285. This support can be enabled through btcoex_enable modparam. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Add infrastructure for generic hw timersVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Remove hw capability bit meant for btcoexVasanthakumar Thiagarajan
We don't need a hw cap bit for btcoex anymore as btcoex scheme type is enough to do this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Determine btcoex scheme type based on chip versionVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Move btcoex related data to a separate structVasanthakumar Thiagarajan
Also define macros for wlanactive and btactive (5 & 6) gpios. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Configure btcoex register during every resetVasanthakumar Thiagarajan
Make sure btcoex register configured with appropriate values after it is initialized with the default values from initvals.h during reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath9k: Split ath9k_hw_btcoex_enable() into two logical piecesVasanthakumar Thiagarajan
This function currently does initialization + enable the btcoex support. Split it into two logical functions which does the above operations separately. Btcoex initialization is done during attach time and enabling this feature is done in start(). Also, add code to disable btcoex support in stop(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath: move regulatory info into shared common structureLuis R. Rodriguez
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Updates for AR9287_12 version of chipset.Vivek Natarajan
Enable AsyncFIFO and AGGWEP for AR9287_12 and later revisions only. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Set AR_WA for AR9287 as it improves consistency in throughput.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Add open loop power control support for AR9287.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Remove duplicate variablesSujith
diversity_control and antenna_switch_swap are already present in ath9k_ops_config. Remove duplicate occurrences in ath_hw. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath9k: Cleanup function return typesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: add initial hardware support for ar9271Luis R. Rodriguez
We will finalize this after some driver core changes, for now we leave this unsupported. Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: remove spurious check for channel on keycache resetLuis R. Rodriguez
ath9k_hw_keyreset() has a spurious check for ah->curchan.. remove it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: call ath9k_hw_detach() once upon hw init failureLuis R. Rodriguez
If hw initialization fails (ath9k_hw_init()) on ath_init_softc() we bail out and call ath9k_hw_detach(). The call ath9k_hw_detach() is conditional though as ath9k_hw_init() could itself have called ath9k_hw_detach(). Just describing this is itself a brain twister. Avoid this nonsense by removing ath9k_hw_detach() from ath9k_hw_init(). Upon hw initialization failure we expect the callers to take care of the cleanup. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: set ah to null after freeingLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: rename ath9k_hw_ani_detach() to ath9k_hw_ani_disable()Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: rename ath9k_hw_rfdetach() to ath9k_hw_rf_free()Luis R. Rodriguez
This makes it clear what this does. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: describe hw initialization betterLuis R. Rodriguez
During initialization ath9k tends to use "attach" to when we initialize hardware due to the fact we used to attach a "HAL". The notion of a HAL is long gone, so lets just be clear on what we are doing. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: break up hw initialization into a few more helpersLuis R. Rodriguez
This makes reading the hardware initialization process easier to understand. The new helpers added are: ath9k_hw_init_cal_settings() ath9k_hw_init_mode_regs() ath9k_hw_init_mode_gain_regs() ath9k_hw_init_11a_eeprom_fix() This patch has no functional changes. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: rename ath9k_hw_set_defaults() to ath9k_hw_init_config()Luis R. Rodriguez
This reflects better what we are actually doing there. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: rename ath9k_hw_newstate() to ath9k_hw_init_defaults()Luis R. Rodriguez
This reflects better what we are actually doing there. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: move hw macrevision checker to helperLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: pass only one argument to hw attachLuis R. Rodriguez
The softc is cached and set within the ath_hw struct. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: call hw initializer directlyLuis R. Rodriguez
ath9k_hw_attach() was going first through some device id verifier, and then calling some other helper which was doing the real hardware initialization. Lets just do the devid checks within the real worker by calling a helper ath9k_hw_devid_supported(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: move devid cache setting to ath_init()Luis R. Rodriguez
This lets us trim one argument off of hw initializer routines. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: move memory allocation of ath_hw to ath_init()Luis R. Rodriguez
This lets us simplify attach code and arguments passed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: propagate hw initialization errorsLuis R. Rodriguez
We were never propagating hw initialization errors, lets do that now and also use -EOPNOTSUPP when device revision is not supported yet. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: use a switch for revising supported hw mac revisionsLuis R. Rodriguez
This makes adding new hw revisions a one line change here. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: remove usage of AR_SREV_*() wrapper to detect supported hwLuis R. Rodriguez
We will clean this up next to just use a switch. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: Remove unused ath9k_hw_intrget()Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ath9k: get rid of unnecessary setpower callsGabor Juhos
We are using setpower routines regardless of the current power mode. Don't bother the hardware, if it is not necessary. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ath9k: fix race with IEEE80211_CONF_PS checksGabor Juhos
There is a small window where the mac80211 changes the IEEE80211_CONF_PS flag, and then informs the driver about the change. We have a race condition if we are checking the flag in the same time. Avoid it by introducing a local variable, and using that instead of checking the IEEE80211_CONF_PS flag directly. This fix the problem reported by Luis: http://article.gmane.org/gmane.linux.kernel.wireless.general/34363 Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27ath9k: Add support for AR9287 based chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: make use ath9k_hw_wait int ath9k_hw_reset_tsfGabor Juhos
We have a dedicated function for this kind of checks, use that instead of duplicating the code. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: wake up the chip for TSF resetGabor Juhos
If we are in NETWORK SLEEP state, AR_SLP32_TSF_WRITE_STATUS limit always exceeds in 'ath9k_hw_reset_tsf', because reading of the AR_SLP3 register always return with the magic 0xdeadbeef value. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: serialize ath9k_ps_{wakeup,restore} callsGabor Juhos
These functions are changing the power mode of the chip, but this may have unpredictable effects, if another code are trying to set the power mode via 'ath9k_hw_setpower' in the same time from another context. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: uninline ath9k_ps_{wakeup,restore} functionsGabor Juhos
Uninline these functions before we add functional changes to them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: serialize ath9k_hw_setpower callsGabor Juhos
Because ath9k_setpower is called from various contexts, we have to protect it against concurrent calls. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove ATH9K_MODE_11BLuis R. Rodriguez
This saves us 2733 bytes. text data bss dec hex filename 252265 3628 1584 257477 3edc5 ath9k-has-b-rate.ko 249905 3628 1584 255117 3e48d ath9k.ko Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Siged-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10drivers/net/wireless/ath/ath9k: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: port to cfg80211 rfkillJohannes Berg
This ports the ath9k rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. ("With this series a kernel panic, which is a regression, during module unload disappears." -- Vasanthakumar Thiagarajan <vasanth@atheros.com> Other patches in the series: ath9k: Add helper to get ath9k specific current channel ath9k: Make sure we have current channel in ah_curchan before rf disable/enable -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Rodriguez <mcgrof@gmail.com> Tested-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22wireless: move some utility functions from mac80211 to cfg80211Zhu Yi
The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11ath9k: Cleanup ineffective return valuesVasanthakumar Thiagarajan
This patch makes the return type of some of the functions void as those functions always return true Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11ath9k: Remove bogus break after returnVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-06 00:49:17 +0000