aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath5k
AgeCommit message (Collapse)Author
2008-02-29WDEV: ath5k, typecheck on nonDEBUGJiri Slaby
At least type check the ATH5K_TRACE paramter on !ATH5K_DEBUG configs. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k/phy.c: fix negative array indexLuis R. Rodriguez
Author: Adrian Bunk <bunk@kernel.org> This patch fixes a negative array index spotted by the Coverity checker. Changes-licensed-under: ISC Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: Use software encryption for nowLuis R. Rodriguez
Hardware encryption doesn't work yet so lets use software encryption for now. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: Port debug.c over to the new band API and enable as build optionLuis R. Rodriguez
This patch finishes the port and enables debug as an build option. This was tested on: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF5112A multiband radio found (0x36) Note: For 2 GHz band on the above card I noticed we get negative channel numbers. Will look into this unless someone beats me to it. Example out put when loading using: sudo modprobe ath5k debug=0x00000400 Band 2 GHz: channels 26, rates 12 channels: 1 2412 00c0 0000 2 2417 00c0 0000 3 2422 00c0 0000 4 2427 00c0 0000 5 2432 00c0 0000 6 2437 00c0 0000 7 2442 00c0 0000 8 2447 00c0 0000 9 2452 00c0 0000 10 2457 00c0 0000 11 2462 00c0 0000 12 2467 00c0 0000 13 2472 00c0 0000 14 2484 00c0 0000 -498 2512 00c0 0000 -494 2532 00c0 0000 -490 2552 00c0 0000 -486 2572 00c0 0000 -482 2592 00c0 0000 -478 2612 00c0 0000 -474 2632 00c0 0000 -470 2652 00c0 0000 -466 2672 00c0 0000 -462 2692 00c0 0000 -458 2712 00c0 0000 -454 2732 00c0 0000 Band 5 GHz: channels 194, rates 8 channels: 27 5135 0140 0000 28 5140 0140 0000 [... etc ] 219 6095 0140 0000 220 6100 0140 0000 rates: 60 000b 0000 0000 90 000f 0000 0000 120 000a 0000 0000 180 000e 0000 0000 240 0009 0000 0000 360 000d 0000 0000 480 0008 0000 0000 540 000c 0000 0000 Changes to base.c, base.h Changes-licensed-under: 3-Clause-BSD Changes to debug.c, debug.h Changes-licensed-under: GPL Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: Use our own Kconfig file, we'll be expanding this shortlyLuis R. Rodriguez
Apologoes, this is a re-post of patch-04, forgot to git-add our Kconfig... New series (only 2 patches needed fixing, which I am reposting) can be found here: http://kernel.org/pub/linux/kernel/people/mcgrof/patches/ath5k/2008-02-04.v2/ Use our own Kconfig file, we'll be expanding this shortly. Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: ath5k_copy_channels() was not setting the channel bandLuis R. Rodriguez
ath5k_copy_channels() wasn't setting the channel's band so all driver channels had a 2GHz band set. Lets set this. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: Cleanup after API changesLuis R. Rodriguez
Cleanup after API changes patch (checkpatch.pl stuff) and on ath5k_hw_channel() make use of the existing ath5k_channel_ok() instead of re-implementing the checks again. This was necessary to make the code cleaner and fit the 80-chars wide limit so sending it within the same patch. Finally make a note that we *may* eventually move cap_range stuff to struct wiphy (band frequency range capabilities). This information can later be exported to userspace, for example, and giving it access to mac80211 and drivers in general can come in handy. Changes to initvals.c, phy.c Changes-licensed-under: ISC Changes to ath5k.h, base.c Changes-licensed-under: 3-Clause-BSD Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: Port to new bitrate/channel APILuis R. Rodriguez
Author: Nick Kossifidis <mickflemm@gmail.com> Tested on 5211, 5213+5112, 5213A+2112A and it wors fine. Also i figured out a way to process rate vallue found on status descriptors, it's still buggy but we are getting closer (i think it improved stability a little). Changes to hw.c, initvals.c, phy.c Changes-licensed-under: ISC Changes to ath5k.h, base.c, base.h Changes-licensed-under: 3-Clause-BSD Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20ath5k: Fix build warnings on some 64-bit platforms.David Miller
'u64' is not necessarily 'unsigned long long' drivers/net/wireless/ath5k/base.c: In function 'ath5k_beacon_update_timers': drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/ath5k/base.c: In function 'ath5k_intr': drivers/net/wireless/ath5k/base.c:2391: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20WDEV, ath5k, don't return int from bool functionJiri Slaby
sparse sees int -> bool cast as an error: hw.c:3754:10: warning: cast truncates bits from constant value (ffffffea becomes 0) Fix it by converting the rettype to int and check appropriately. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20WDEV: ath5k, fix lock imbalanceJiri Slaby
Omitted lock causes sparse warning drivers/net/wireless/ath5k/base.c:1682:1: warning: context imbalance in 'ath5k_tasklet_rx' - different lock contexts for basic block Add the lock to the guilty fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15ath5k: correct padding in tx descriptorsBruno Randolf
when setting up the tx descriptors for the hardware we must account for any padding between the header and the data we might have added previously. frame len is the length of the frame in the air (including FCS but no padding) and buffer len is the length of the buffer (including padding, but without FCS). changing the way ah_setup_tx_desc is called: now excluding the FCS, since it's easier to add that in the function where we need it. before this fix we sent trailing zero bytes after the packet (because frame len included the padding) which was not a big problem without WEP, but with WEP this resultes in a wrong WEP checksum and the packet is discarded - which is how i noticed at all ;) an easy way to run into header padding problems, btw, is to connect to a QoS (WME) enabled access point (eg. madwifi) - QoS data frames are 2 byte longer and will require padding. this patch applies on top of luis latest patch series from 04.02.2008. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01ath5k: fix section mismatch warningJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-31ath5k: debug level improvementsBruno Randolf
* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and ATH5K_DEBUG_BEACON_PROC. * remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level - if it's fatal it should be logged as an error. * fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug. * allow debug levels to be changed by echoing their name into /debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will be turned on and vice versa. * use copy_from_user() when reading from the debug files. use unsigned int for better optimization. reduce buffer sizes on stack. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/debug.c: Changes-licensed-under: GPL drivers/net/wireless/ath5k/debug.h: Changes-licensed-under: GPL Signed-off-by: Bruno Randolf <bruno@thinktube.com> Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28ath5k: always extend rx timestamp with tsfBruno Randolf
always extend the rx timestamp with the local TSF, since this information is also needed for proper IBSS merging. this is done in the tasklet for now, maybe has to be moved to the interrupt handler like in madwifi. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: configure backoff for IBSS beacon queueBruno Randolf
in "11.1.2.2 Beacon generation in an IBSS" the IEEE802.11 standard says, each STA should... "b) Calculate a random delay uniformly distributed in the range between zero and twice aCWmin × aSlotTime,". configure cwmin and cwmax of the beacon queue in IBSS mode according to this. unfortunately beacon backoff does not work reliably yet, so i suspect we have a problem somewhere else, since the same settings (and similar beacon timer configuration) work for madwifi. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: use SWBA to detect IBSS HW mergesBruno Randolf
use SWBA (software beacon alert) interrupts to keep track of the next beacon time und check if a HW merge (automatic TSF update) has happened on every received beacon with the same BSSID. this is necessary because the atheros hardware will silently update the local TSF in IBSS mode, but not its beacon timers. if the TSF is ahead of the beacon timers no beacons are sent until the timers wrap around (typically after about 1 minute). this solution is not very nice, since we have to look into every beacon, but there is apparently no other way to detect HW merges. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/base.h: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: better beacon timer calculationBruno Randolf
update ath5k_beacon_update_timers() for better beacon timer calculation in a variety of situations. most important is the possibility to call it with the timestamp of a received beacon, when we detected that a HW merge has happened and we need to reconfigure the beacon timers based on that. we call this from the mac80211 callback reset_tsf now instead of beacon_update, and there will be more use of it in the next patch. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: beacon interval is in TUBruno Randolf
the beacon interval is passed by mac80211 in TU already, so we can directly use it without conversion. also update the comments about TU (1 TU is defined by 802.11 as 1024usec). drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/base.h: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: use 3 instead of 0x00000003Bruno Randolf
reviewed beacon timer initialization with register traces from madwifi: what we are doing is correct :). one minor fix: use 3 instead of 0x00000003 - it's more readable. drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: reset key cache after resumeJohn W. Linville
Otherwise it may be impossible to connected to an open network after a resume. This is a modified version of an original patch by Alex Eskin <alexeskin@yahoo.com>: https://bugzilla.redhat.com/show_bug.cgi?id=425950#c8 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: use AR5K_KEYTABLE_SIZE when initializing key tableJohn W. Linville
...instead of using AR5K_KEYCACHE_SIZE, which would seem to be a typo/thinko... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: Fix frame duration oopsLuis R. Rodriguez
This patch fixes an oops which was introduced as a regression by commit fd640775bd16e1df50c867cc547af0, on the patch titled, "mac80211: dont use interface indices in drivers". ieee80211_generic_frame_duration() now relies on sdata->flags which itself gets set upon bringing the interface up. We check for the virtual interface now before setting the rate duration registers. After the mode changes are introduced onto mac80211 we should revisit these changes. This patch was tested on the following cards: 1) BG card: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF2112A 2GHz radio found (0x46) 2) ABG card: Atheros AR5213A chip found (MAC: 0x59,PHY: 0x43) RF5112A multiband radio found (0x36) Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: dont use interface indices in driversJohannes Berg
This patch gets rid of the if_id stuff where possible in favour of a new per-virtual-interface structure "struct ieee80211_vif". This structure is located at the end of the per-interface structure and contains a variable length driver-use data area. This has two advantages: * removes the need to look up interfaces by if_id, this is better for working with network namespaces and performance * allows drivers to store and retrieve per-interface data without having to allocate own lists/hash tables Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28[PATCH] Net: add ath5k wireless driverJiri Slaby
add ath5k wireless driver Portions of this driver are covered by one or both of the ISC and 3-clause BSD licenses. Specific license information is cited at the top of each file. Acked-by and Signed-off-by information is collected from individual patches as collected in the wireless-2.6 tree prior to upstream submission. Acked-by: Matthew W. S. Bell <mentor@madwifi.org> Acked-by: Michael Taylor <mike.taylor@apprion.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bradley M. Kuhn <bkuhn@softwarefreedom.org> Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Karen Sandler <karen@softwarefreedom.org> Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Matt Norwood <norwood@softwarefreedom.org> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Richard Fontana <fontana@softwarefreedom.org> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Ulrich Meis <meis@nets.rwth-aachen.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 03:45:01 +0000